UF5402

UF5400 thru UF5408 Vishay General Semiconductor Soft Recovery Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low switching losses, high efficiency • High forward surge capability DO-201AD • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 3.0 A 50 V to 1000 V 150 A 50 ns, 75 ns 1.0 V, 1.7 V 150 °C For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-201AD Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current, 0.375" (9.5 mm) lead length at TA= 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL UF5400 UF5401 UF5402 UF5403 UF5404 UF5405 UF5406 UF5407 UF5408 UNIT VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 300 210 300 400 280 400 3.0 500 350 500 600 420 600 800 560 800 1000 700 1000 V V V A IFSM 150 A TJ, TSTG - 55 to + 150 °C Document Number: 88756 Revision: 23-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 UF5400 thru UF5408 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz TEST CONDITIONS SYMBOL UF5400 UF5401 UF5402 UF5403 UF5404 UF5405 UF5406 UF5407 UF5408 UNIT 3.0 A VF (1) TA = 25 °C IR TA = 100 °C TJ = 25 °C trr 1.0 1.7 V 10 μA 75 200 50 75 ns CJ 45 36 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL UF5400 UF5401 UF5402 UF5403 UF5404 UF5405 UF5406 UF5407 UF5408 UNIT RθJA (1) RθJL (1) 20 °C/W 8.5 (1) Note Thermal resistance from junction to lead and from junction to ambient with 0.375" (9.5 mm) lead length, both leads attached to heatsink ORDERING INFORMATION (Example) PREFERRED P/N UF5406-E3/54 UF5406-E3/73 UNIT WEIGHT (g) 1.172 1.172 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 4.5 4.0 D = 0.5 D = 0.3 D = 0.2 D = 0.1 D = 1.0 D = 0.8 Average Forward Rectified Current (A) 2.5 Average Power Loss (W) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 2.0 1.5 1.0 T 0.5 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0 20 40 60 80 100 120 140 160 D = tp/T 0 0.5 1.0 1.5 2.0 2.5 tp 3.0 3.5 Ambient Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Forward Power Loss Characteristics Document Number: 88756 Revision: 23-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com UF5400 thru UF5408 Vishay General Semiconductor 150 100 125 Instantaneous Reverse Leakage Current (μA) Peak Forward Surge Current (A) TA = 55 °C 8.3 ms Single Half Sine-Wave TJ = 125 °C TJ = 100 °C 10 TJ = 125 °C TJ = 100 °C 1 TJ = 25 °C 100 75 50 0.1 UF5400 thru UF5404 UF5405 thru UF5408 0.01 0 20 40 60 80 100 25 0 1 10 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Reverse Leakage Characteristics 100 160 UF5400 thru UF5404 140 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 120 100 80 60 40 20 1 UF5405 thru UF5408 UF5400 thru UF5404 UF5405 thru UF5408 0.1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88756 Revision: 23-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1