UF5406

UF5400 thru UF5408 Vishay General Semiconductor Soft Recovery Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low switching losses, high efficiency • High forward surge capability DO-201AD • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-201AD Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 3.0 A 50 V to 1000 V 150 A 50 ns, 75 ns 1.0 V, 1.7 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current, 0.375" (9.5 mm) lead length at TA= 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL VRRM VRMS VDC UF 5400 50 35 50 UF 5401 100 70 100 UF 5402 200 140 200 UF 5403 300 210 300 UF 5404 400 280 400 UF 5405 500 350 500 UF 5406 600 420 600 UF 5407 800 560 800 UF 5408 1000 700 1000 UNIT V V V IF(AV) 3.0 A IFSM 150 A TJ, TSTG - 55 to + 150 °C Document Number: 88756 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 UF5400 thru UF5408 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz TEST CONDITIONS SYMBOL UF 5400 UF 5401 UF 5402 1.0 UF 5403 UF 5404 UF 5405 UF 5406 UF 5407 UF UNIT 5408 V 3.0 A VF 1.7 TA = 25 °C IR TA = 100 °C 75 10 200 µA TJ = 25 °C trr 50 75 ns CJ 45 36 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to lead and from junction to ambient with 0.375" (9.5 mm) lead length, both leads attached to heatsink SYMBOL RθJA RθJL UF 5400 UF 5401 UF 5402 UF 5403 UF 5404 20 8.5 UF 5405 UF 5406 UF 5407 UF UNIT 5408 °C/W ORDERING INFORMATION (Example) PREFERRED P/N UF5406-E3/54 UF5406-E3/73 UNIT WEIGHT (g) 1.172 1.172 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 4.5 Lead Length = 0.375" (9.5 mm) 2.5 D = 0.5 4.0 D = 0.3 D = 0.2 D = 0.1 D = 1.0 D = 0.8 Average Forward Rectified Current (A) Average Power Loss (W) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 2.0 1.5 1.0 T 0.5 Resistive or Inductive Load 0 20 40 60 80 100 120 140 160 D = tp/T 0 0.5 1.0 1.5 2.0 2.5 tp 3.0 3.5 Ambient Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88756 Revision: 20-Aug-07 UF5400 thru UF5408 Vishay General Semiconductor 150 100 Peak Forward Surge Current (A) 125 Instantaneous Reverse Leakage Current (µA) TA = 55 °C 8.3 ms Single Half Sine-Wave TJ = 125 °C TJ = 100 °C TJ = 125 °C TJ = 100 °C 1 TJ = 25 °C 10 100 75 50 0.1 UF5400 - UF5404 UF5405 - UF5408 0.01 0 20 40 60 80 100 25 0 1 10 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Reverse Leakage Characteristics 100 160 140 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Junction Capacitance (pF) UF5400 - UF5404 120 100 80 60 40 UF5400 - UF5404 UF5405 - UF5408 UF5405 - UF5408 1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 0.1 0.01 0.4 20 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88756 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1