UG4C

UG4A thru UG4D Vishay General Semiconductor Miniature Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low switching losses, high efficiency • High forward surge capability DO-201AD • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 4.0 A 50 V to 200 V 150 A 20 ns 0.95 V 150 °C For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-201AD Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM TJ, TSTG UG4A 50 35 50 UG4B 100 70 100 4.0 150 - 55 to + 150 UG4C 150 105 150 UG4D 200 140 200 UNIT V V V A A °C Document Number: 88763 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 UG4A thru UG4D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) IF = 4.0 A TA = 25 °C TA = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 4.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM IF = 4.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM 4.0 V, 1 MHz TJ = 25 °C TJ = 100 °C TJ = 25 °C TJ = 100 °C TEST CONDITIONS SYMBOL VF IR trr trr Qrr CJ VALUE 0.95 5.0 300 20 30 50 15 30 20 UNIT V µA ns ns nC pF Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical reverse recovery time Typical stored charge Typical junction capacitance Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length SYMBOL RθJA UG4A UG4B 25 UG4C UG4D UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N UG4D-E3/54 UG4D-E3/73 UNIT WEIGHT (g) 1.138 1.138 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 6.0 1000 Average Forward Rectified Current (A) 5.0 4.0 Peak Forward Surge Current (A) Resistive or Inductive Load 0.375" (9.5 mm) Lead Length TL Lead Temperature TL = 75 °C 8.3 ms Single Half Sine-Wave 100 3.0 2.0 TA, Ambient Temperature P.C.B. Mounted 0.5 x 0.5" (12 x 12 mm) Copper Pads 0 25 50 75 100 125 150 175 10 1.0 0 1 1 10 100 Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curves Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88763 Revision: 20-Aug-07 UG4A thru UG4D Vishay General Semiconductor 100 TJ = 100 °C 10 TJ = 25 °C 1 Pulse Width = 300 µs 1 % Duty Cycle 60 Recovered Stored Change/Reverse Recovery Time, nC/ns Instantaneous Forward Current (A) 50 IF = 4.0 A VR = 30 V dI/dt = 150 A/µs dI/dt = 100 A/µs 40 dI/dt = 20 A/µs dI/dt = 50 A/µs dI/dt = 100 A/µs dI/dt = 150 A/µs dI/dt = 50 A/µs dI/dt = 20 A/µs 10 trr Qrr 0 0 25 50 75 100 125 150 175 30 20 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) Junction Temperature (°C) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Reverse Switching Charateristics 1000 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Reverse Leakage Current (µA) 100 TJ = 100 °C 10 Junction Capacitance (pF) 10 1 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 1 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88763 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1