UGF10BCT

BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor Dual Common Cathode Ultrafast Rectifier TO-220AB ITO-220AB FEATURES • Glass passivated chip junction • Ultrafast recovery times • Soft recovery characteristics • Low switching losses, high efficiency • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching power supplies, freewheeling diodes, dc-to-dc converters and polarity protection application. MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum 2 1 BYQ28E & UG10 PIN 1 PIN 3 PIN 2 CASE 3 1 2 3 BYQ28EF & UGF10 PIN 1 PIN 3 PIN 2 TO-263AB K 2 1 BYQ28EB & UGB10 PIN 1 PIN 2 K HEATSINK PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 5Ax2 100 V, 150 V, 200 V 55 A 25 ns 0.895 V 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 100 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Non-repetitive peak reverse current per diode at tp = 100 µs Electrostatic discharge capacitor voltage, human body model: C = 250 pF, R = 1.5 kΩ Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Document Number: 88549 Revision: 07-Jan-08 total device per diode SYMBOL VRRM VRWM VDC IF(AV) IFSM IRSM VC TJ, TSTG VAC UG10BCT BYQ28E-100 100 100 100 UG10CCT BYQ28E-150 150 150 150 10 5 55 0.2 8 - 40 to + 150 1500 UG10DCT BYQ28E-200 200 200 200 UNIT V V V A A A kV °C V For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) Maximum reverse current per diode at working peak reverse voltage Maximum reverse recovery time per diode Maximum reverse recovery time per diode Maximum stored charge per diode Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle IF = 1 0 A IF = 5 A IF = 5 A TEST CONDITIONS TJ = 25 °C TJ = 25 °C TJ = 150 °C TJ = 25 °C TJ = 100 °C IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 2 A, dI/dt = 20 A/µs, VR = 30 V, Irr = 0.1 IRM SYMBOL VF VALUE 1.25 1.10 0.895 10 200 25 20 9 UNIT V IR trr trr Qrr µA ns ns nC THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode, junction to ambient Typical thermal resistance per diode, junction to case SYMBOL RθJA RθJC UG10 BYQ28E 50 4.5 UGF10 BYQ28EF 55 6.7 UGB10 BYQ28EB 50 4.8 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB ITO-220AB TO-263AB TO-263AB TO-220AB ITO-220AB TO-263AB TO-263AB Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N BYQ28E-200-E3/45 BYQ28EF-200-E3/45 BYQ28EB-200-E3/45 BYQ28EB-200-E3/81 BYQ28E-200HE3/45 (1) BYQ28EF-200HE3/45 (1) BYQ28EB-200HE3/45 (1) UNIT WEIGHT (g) 1.80 1.95 1.77 1.77 1.80 1.95 1.77 1.77 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape reel Tube Tube Tube Tape reel BYQ28EB-200HE3/81 (1) www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88549 Revision: 07-Jan-08 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 15 Resistive or Inductive Load 1000 Instantaneous Reverse Current (µA) Average Forward Current (A) TJ = 125 °C 100 TJ = 100 °C 10 10 5 1 TJ = 25 °C 0.1 0 0 50 100 150 0 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode Peak Forward Surge Current (A) TC = 105 °C 8.3 ms Single Half Sine-Wave Stored Charge/Reverse Recovery Time (nC/ns) 100 50 40 at 2 A, 20 A/µs 30 at 1 A, 100 A/µs 20 at 5 A, 50 A/µs at 5 A, 50 A/µs 10 at 1 A, 100 A/µs 10 at 2 A, 20 A/µs 0 25 50 75 100 125 trr Qrr 1 1 10 100 Number of Cycles at 60 Hz Junction Temperature (°C) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Reverse Switching Characteristics Per Diode 100 100 Pulse Width = 300 µs 1 % Duty Cycle TJ = 125 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 125 °C TJ = 100 °C 1 Junction Capacitance (pF) 10 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Junction Capacitance Per Diode Document Number: 88549 Revision: 07-Jan-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45° REF. 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.600 (15.24) 0.580 (14.73) PIN 0.671 (17.04) 0.651 (16.54) 7° REF. 0.350 (8.89) 0.330 (8.38) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 1 2 3 7° REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.191 (4.85) 0.171 (4.35) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88549 Revision: 07-Jan-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1