New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
Surface Mount Ultrafast Rectifier
FEATURES
• Very low profile - typical height of 1.0 mm
eSMP ® Series
• Ideal for automated placement • Oxide planar chip junction • Ultrafast recovery times for high frequency • Meets MSL level 1 per J-STD-020, LF maximum peak of 260 °C • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
DO-220AA (SMP)
• Halogen-free according to IEC 61249-2-21 definition
MECHANICAL DATA PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM trr VF at IF = 1.0 A TJ max. 1.0 A 100 V, 150 V, 200 V 30 A 25 ns 0.75 V 175 °C
Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for ultrafast switching speeds of AC/AC and DC/DC converters in high temperature conditions for both consumer and automotive applications.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL UH1PB HB 100 UH1PC HC 150 1.0 30 - 55 to + 175 UH1PD HD 200 V A A °C UNIT
Document Number: 89173 Revision: 19-Apr-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER IF = 0.6 A Instantaneous forward voltage IF = 1.0 A IF = 0.6 A IF = 1.0 A Reverse current Rated VR IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM Typical softness factor (tb/ta) Maximum reverse recovery current Typical stored charge Typical junction capacitance 4.0 V, 1 MHz IF = 1.0 A, dI/dt = 200 A/μs, VR = 200 V TA = 125 °C TEST CONDITIONS TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL TYP. 0.88 0.95 0.69 0.75 IR (2) 5.0 19 TA = 25 °C trr 27 S IRM Qrr CJ 0.4 3.7 48 16 40 5.5 A nC pF MAX. 1.05 V 0.85 1.0 μA 25 25 ns UNIT
Maximum reverse recovery time
Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Typical thermal resistance SYMBOL RJA (1) RJM (1) UH1PB UH1PC 120 °C/W 20 UH1PD UNIT
Note (1) Free air, mounted on recommended copper pad area. Thermal resistance R JA - junction to ambient, RJM junction to mount at the terminal cathode band
ORDERING INFORMATION (Example)
PREFERRED P/N UH1PD-M3/84A UH1PD-M3/85A UNIT WEIGHT (g) 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A BASE QUANTITY 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel
www.vishay.com 2
For technical questions within your region, please contact one of the following: Document Number: 89173 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1.2 100 TA = 175 °C TA = 150 °C 10 TA = 125 °C TA = 100 °C
Average Forward Rectified Current (A)
1.0
0.8
Instantaneous Reverse Current (μA)
0.6
1
0.4 TM Measured at the Cathode Band Terminal
0.1 TA = 25 °C
0.2
0 95 105 115 125 135 145 155 165 175
0.01 10 20 30 40 50 60 70 80 90 100
Mount Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
1.0 0.9 D = 0.5 D = 0.3 D = 0.2 D = 0.1 D = 1.0 D = 0.8
100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p
Average Power Loss (W)
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4
Junction Capacitance (pF)
10
T
D = tp/T 0.6 0.8
tp 1 1.0 1.2 0.1 1 10 100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
10
TA = 150 °C
1
TA = 125 °C TA = 100 °C
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
TA = 175 °C
1000 Junction to Ambient
100
0.1
10
TA = 25 °C 0.01 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
1 0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Document Number: 89173 Revision: 19-Apr-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
UH1PB, UH1PC, UH1PD
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
Cathode Band 0.012 (0.30) REF.
0.086 (2.18) 0.074 (1.88)
0.053 (1.35) 0.041 (1.05)
0.036 (0.91) 0.024 (0.61)
0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70)
0.103 (2.60) 0.087 (2.20)
0.032 (0.80) 0.016 (0.40)
0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) 0.100 (2.54) 0.018 (0.45) 0.006 (0.15)
0.025 0.030 (0.635) (0.762)
0.050 (1.27)
www.vishay.com 4
For technical questions within your region, please contact one of the following: Document Number: 89173 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1