UH6PJ

New Product UH6PJ Vishay General Semiconductor High Current Density Surface Mount Ultrafast High Voltage Rectifier eSMP ® Series K FEATURES • Very low profile - typical height of 1.1 mm • Ideal for automated placement • Oxide planar chip junction • Ultrafast recovery time 1 2 • Soft recovery characteristics • Low switching losses, high efficiency • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TO-277A (SMPC) K Cathode Anode 1 Anode 2 PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF at IF = 6.0 A TJ max. 6.0 A 600 V 80 A 25 ns 1.3 V 175 °C • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test TYPICAL APPLICATIONS For use in high voltage, high frequency power factor corrections, switching mode power supplies, freewheeling diodes and secondary DC/DC rectification application. MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL UH6PJ H6PJ 600 6.0 80 - 55 to + 175 V A A °C UNIT Document Number: 89069 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 3.0 A Instantaneous forward voltage IF = 6.0 A IF = 3.0 A IF = 6.0 A Reverse current VR = 600 V TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL TYP. 1.6 1.9 1.1 1.3 IR (2) 46 23 trr 33 S IF = 6 A, dI/dt = 200 A/μs, VR = 400 V, TJ = 125 °C IF = 6 A, dI/dt = 48 A/μs, VF = 1.1 x VF max. 4.0 V, 1 MHz IRM Qrr tfr CJ 0.3 6.5 150 150 30 45 A nC ns pF MAX. 3.0 V 1.8 10 μA 200 25 ns UNIT Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM Typical softness factor (tb/ta) Typical reverse recovery current Typical stored charge Typical forward recovery time Typical junction capacitance Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance Notes (1) Units mounted on recommended PCB 1 oz. pad layout (2) With heatsink SYMBOL RJA (1) UH6PJ 90 UNIT °C/W RJL (2) 5 ORDERING INFORMATION (Example) PREFERRED P/N UH6PJ-M3/86A UH6PJ-M3/87A UH6PJHM3/86A (1) UNIT WEIGHT (g) 0.10 0.10 0.10 0.10 PREFERRED PACKAGE CODE 86A 87A 86A 87A BASE QUANTITY 1500 6500 1500 6500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel UH6PJHM3/87A (1) Note (1) Automotive grade www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89069 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 7 1000 Average Forward Rectified Current (A) 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 TL Measured at the Cathode Band Terminal Instantaneous Reverse Current (µA) Resistive or Inductive Load TA = 175 °C 100 TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.1 0.01 10 20 30 40 50 60 70 80 90 100 Lead Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 10 D = 0.5 D = 0.3 D = 0.2 D = 0.1 6 D = 1.0 D = 0.8 100 Average Power Loss (W) 8 4 2 0 0 1 2 3 4 5 6 7 Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 Instantaneous Forward Current (A) TA = 175 °C 10 TA = 150 °C TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0.01 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Document Number: 89069 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product UH6PJ Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) K 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) 0.087 (2.20) 0.075 (1.90) 0.047 (1.20) 0.039 (1.00) Mounting Pad Layout 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.268 (6.80) 0.186 (4.72) MIN. 0.049 (1.24) 0.037 (0.94) 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) Conform to JEDEC TO-277A 0.050 (1.27) MIN. 0.041 (1.04) 0.055 (1.40) MIN. www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89069 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1