USB260

New Product USB260 Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ideal for automated placement • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AA (SMB) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. 2.0 A 600 V 90 A 30 ns 1.0 V 150 °C PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETERS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at IAS = 2.0 A, L = 10 mH, TJ = 25 °C Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM EAS TJ, TSTG SYMBOL USB260 U60 600 420 600 2.0 90 20 - 55 to + 150 V V V A A mJ °C UNIT Document Number: 84705 Revision: 13-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product USB260 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETERS Breakdown voltage Instantaneous forward voltage (1) TEST CONDITIONS IR = 10 µA IF = 1 A IF = 2.0 A VR = 600 V TJ = 25 °C TJ = 25 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C trr CJ VF SYMBOL VBR TYP. MAX. UNIT V 1.6 1.1 5.0 100 30 45 V 600 (minimum) 1.25 1.5 1.0 30 Maximum reverse current (2) Maximum reverse recovery time Typical junction capacitance Notes: µA ns pF IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETERS Typical thermal resistance (1) Note: (1) Units mounted on P.C.B. with 2.0 x 2.0" copper pad areas SYMBOL RθJA RθJL USB260 45 10 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N USB260-E3/52T USB260-E3/5BT USB260HE3/52T (1) USB260HE3/5BT (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 0.096 0.096 0.096 0.096 PREFERRED PACKAGE CODE 52T 5BT 52T 5BT BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 84705 Revision: 13-May-08 New Product USB260 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 100 Average Forward Rectified Current (A) Instantaneous Forward Current (A) TJ = 150 °C TJ = 125 °C 10 2.0 1 TJ = 25 °C 0.1 1.0 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 80 90 100 110 120 130 140 150 0.01 0.1 0.6 1.1 1.6 2.1 2.6 3.1 3.6 Lead Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Instantaneous Forward Characteristics 3.0 D = 0.5 2.5 D = 0.3 D = 0.2 2.0 D = 0.1 1.5 Instantaneous Reverse Current (µA) D = 0.8 1000 Average Power Loss (W) 100 TJ = 150 °C D = 1.0 10 TJ = 125 °C 1.0 T 1 TJ = 25 °C 0.5 D = tp/T 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 tp 0.1 0.01 10 20 30 40 50 60 70 80 90 100 Average Forward Current (A) Percent of Rated Peak Reverse Voltage (%) Figure 2. Forward Power Loss Characteristics Figure 5. Typical Reverse Leakage Characteristics 100 1000 Peak Forward Surge Current (A) 80 Junction Capacitance (pF) 100 60 40 10 20 0 1 10 100 1 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 6. Typical Junction Capacitance Document Number: 84705 Revision: 13-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product USB260 Vishay General Semiconductor 100 Transient Thermal Impedance (°C/W) 10 1 0.01 0.1 1 10 100 t - Pulse Duration (s) Figure 7. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) 0.060 (1.52) MIN. 0.220 REF. www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 84705 Revision: 13-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1