V60100P

New Product V60100P Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.456 V at IF = 10 A FEATURES TMBS® • Trench MOS Schottky technology • Low forward voltage drop, low power losses • High efficiency operation 3 2 1 • Low thermal resistance • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. TO-247AD (TO-3P) PIN 1 PIN 3 PIN 2 CASE PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 30 A TJ max. 2 x 30 A 100 V 350 A 0.657 V 150 °C MECHANICAL DATA Case: TO-247AD (TO-3P) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range per device per diode SYMBOL VRRM IF(AV) IFSM IRRM dV/dt TJ, TSTG V60100P 100 60 30 350 1.0 10 000 - 40 to + 150 UNIT V A A A V/µs °C Document Number: 88978 Revision: 26-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product V60100P Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Breakdown voltage TEST CONDITIONS IR = 1.0 mA IF = 1 0 A IF = 1 5 A IF = 3 0 A IF = 1 0 A IF = 1 5 A IF = 3 0 A V R = 80 V Reverse current per diode (2) VR = 100 V Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms TJ = 25 °C TJ = 25 °C VF TJ = 125 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VBR TYP. 100 (minimum) 0.518 0.576 0.730 0.456 0.531 0.657 34.6 9.5 IR 82.0 19.2 MAX. 0.79 V 0.70 800 45 µA mA µA mA UNIT V Instantaneous forward voltage per diode (1) THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL RθJC V60100P 1.5 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N V60100P-E3/45 UNIT WEIGHT (g) 6.12 PREFERRED PACKAGE CODE 45 BASE QUANTITY 30/tube DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 70 Resistive or Inductive Load 25 D = 0.8 Average Forward Current (A) 60 Average Power Loss (W) 20 D = 0.3 15 D = 0.2 D = 0.1 10 D = 0.5 D = 1.0 50 40 30 20 10 T 5 D = tp/T tp 30 35 0 0 25 50 75 100 125 150 175 0 0 5 10 15 20 25 Case Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88978 Revision: 26-May-08 New Product V60100P Vishay General Semiconductor 400 10 000 TJ = TJ Max. 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Peak Forward Surge Current (A) 300 Junction Capacitance (pF) 1000 200 100 1 10 100 100 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 6. Typical Junction Capacitance Per Diode 100 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) TJ = 150 °C Junction to Case TJ = 125 °C 10 TJ = 25 °C 1 1 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode 1000 Instantaneous Reverse Current (mA) 100 TJ = 150 °C 10 TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 5. Typical Reverse Characteristics Per Diode Document Number: 88978 Revision: 26-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product V60100P Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-247AD (TO-3P) 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.203 (5.16) 0.193 (4.90) 30° 0.170 (4.3) 0.840 (21.3) 0.820 (20.8) 0.142 (3.6) 0.138 (3.5) 10° TYP. Both Sides 0.078 (1.98) REF. 10 1 2 3 0.086 (2.18) 0.076 (1.93) 0.127 (3.22) 0.118 (3.0) 0.108 (2.7) 1° REF. Both Sides 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97) 0.225 (5.7) 0.205 (5.2) PIN 1 PIN 3 0.048 (1.22) 0.044 (1.12) 0.030 (0.76) 0.020 (0.51) PIN 2 CASE www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88978 Revision: 26-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1