VESD05A5A-HSF
Vishay Semiconductors
5-Line ESD-Protection Diode Array in LLP75
FEATURES
6 5 4
• Ultra compact LLP75-6L package • Low profile < 0.6 mm • 5-line ESD-protection • Low leakage current IR < 0.1 µA
1
2
3
19956
20453
• Low load capacitance CD = 13 pF
1
MARKING (example only)
• ESD-protection acc. IEC 61000-4-2 ± 15 kV contact discharge ± 15 kV air discharge • Working voltage range VRWM = 5 V • e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
XX YY
21001
Dot = Pin 1 marking XX = Date code YY = Type code (see table below)
ORDERING INFORMATION
DEVICE NAME VESD05A5A-HSF ORDERING CODE VESD05A5A-HSF-GS08 TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) 3000 MINIMUM ORDER QUANTITY 15 000
PACKAGE DATA
DEVICE NAME VESD05A5A-HSF PACKAGE NAME LLP75-6L TYPE CODE AR WEIGHT 4.2 mg MOLDING COMPOUND FLAMMABILITY RATING UL 94 V-0 MOISTURE SENSITIVITY LEVEL MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS
PARAMETER TEST CONDITIONS BiAs-Mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 ìs; single shot BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 ìs; single shot BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 ìs; single shot BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 ìs; single shot acc. IEC61000-4-2; 10 pulses BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2) Contact discharge Air discharge Contact discharge Air discharge SYMBOL IPPM IPPM PPP PPP VESD VESD VESD VESD TJ TSTG VALUE 2.5 2.5 33 43 ± 15 ± 15 ± 10 ± 10 - 40 to + 125 - 55 to + 150 UNIT A A W W kV kV kV kV °C °C
Peak pulse current
Peak pulse power
ESD immunity
ESD immunity
acc. IEC 61000-4-2 ; 10 pulses BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Junction temperature
Operating temperature Storage temperature
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 81655 Rev. 1.3, 21-Oct-10 For technical questions, contact: ESDprotection@vishay.com www.vishay.com 1
VESD05A5A-HSF
Vishay Semiconductors 5-Line ESD-Protection Diode Array in
LLP75
APPLICATION NOTE:
a. With the VESD05A5A-HSF 5 different signal or data lines can be clamped to ground. Due to the different clamping levels in forward and reverse direction the VESD05A5A-HSF clamping behavior is Bidirectional and Asymmetrical (BiAs).
L1 L2 L3
6 5 4
1
2
3
L4 L5
19958
b. If symmetrical clamping behaviour is required the VESD05A5A-HSF can also be used as a Bidirectional Symmetrical protection device protecting up to 4 lines. In this case pin no. 2 must not be connected.
L1 L2 L3
6 5 4
1
2
3
L4
19959
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER Protection paths Reverse working voltage Max. reverse current Reverse breakdown voltage Reverse clamping voltage Forward clamping voltage Line capacitance TEST CONDITIONS/REMARKS Number of lines which can be protected at IR = 0.1 µA at VR = 5 V at IR = 1 mA at IPP = 1 A at IPP = IPPM = 2.5 A at IPP = 1 A at IPP = IPPM = 2.5 A at VR = 0 V; f = 1 MHz at VR = 2.5 V; f = 1 MHz SYMBOL Nlines VRWM IR VBR VC VC VF VF CD CD MIN. 5 6 TYP. < 0.01 6.7 9 12 2 3.2 13 8 MAX. 5 0.1 7.5 10 13 2.5 4 15 UNIT lines V µA V V V V V pF pF
Note • BiAs mode (between pin 1, 3, 4, 5 or 6 and pin 2)
www.vishay.com 2
For technical questions, contact: ESDprotection@vishay.com
Document Number: 81655 Rev. 1.3, 21-Oct-10
VESD05A5A-HSF
5-Line ESD-Protection Diode Array in Vishay Semiconductors LLP75
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
120 % Rise time = 0.7 ns to 1 ns 100
Discharge Current IESD
100 % 10 80 % 60 %
53 %
IF (mA)
1
0.1
40 %
27 %
20 % 0% - 10 0 10 20 30 40 50 60 70 80 90 100
20557
0.01
0.001 0.5
19949
0.6
0.7
0.8
0.9
1
1.1
Time (ns)
VF (V)
Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 Ω/150 pF)
Fig. 4 - Typical Forward Current IF vs. Forward Voltage VF
8 100 % 80 % 60 % 20 µs to 50 % 40 % 20 % 1 0% 0
20548
8 µs to 100 %
7 6
VR (V)
40
19950
5 4 3 2
IPPM
10
20
30
0 0.01
0.1
1
10
100 1000 10 000
Time (µs)
IR (µA)
Fig. 2 - 8/20 µs Peak Pulse Current Wave Form acc. IEC 61000-4-5
Fig. 5 - Typical Reverse Voltage VR vs. Reverse Current IR
16 f = 1 MHz 14 12
14
Measured acc. IEC 61000-4-5 (8/20 µs - wave form)
12 10 8
reverse
CD (pF)
10
VC (V)
6 4 2 0
VC
8 6 4 2 0 0 1 2 3 4 5
-2 -4 -6 0
19951
forward
0.5
1
1.5
2
2.5
3
3.5
4
19948
VR (V)
IPP (A)
Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR
Fig. 6 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP www.vishay.com 3
Document Number: 81655 Rev. 1.3, 21-Oct-10
For technical questions, contact: ESDprotection@vishay.com
VESD05A5A-HSF
Vishay Semiconductors 5-Line ESD-Protection Diode Array in
LLP75
100 80 60
acc. IEC 61000-4-2 + 8 kV contact discharge
VC-ESD (V)
40 20 0 - 20 - 10 0 10 20 30 40 50 60 70 80 90
19994
t (ns)
Fig. 7 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2)
40 20 0
VC-ESD (V)
- 20 - 40 - 60 - 80
acc. IEC 61000-4-2 - 8 kV contact discharge
- 100 - 10 0 10 20 30 40 50 60 70 80 90
19995
t (ns)
Fig. 8 - Typical Clamping Performance at - 8 kV Contact Discharge (acc. IEC 61000-4-2)
200 150 100
acc. IEC 61000-4-2 contact discharge
VC-ESD (V)
50
VC-ESD
0 - 50 - 100 - 150 - 200 0 5 10 15 20
19954
VESD (kV)
Fig. 9 - Typical max. Clamping Voltage at ESD Contact Discharge (acc. IEC 61000-4-2)
www.vishay.com 4
For technical questions, contact: ESDprotection@vishay.com
Document Number: 81655 Rev. 1.3, 21-Oct-10
VESD05A5A-HSF
5-Line ESD-Protection Diode Array in Vishay Semiconductors LLP75
PACKAGE DIMENSIONS in millimeters (inches): LLP75-6L
1.05 (0.041) 0.95 (0.037) Heat sink 0.2 (0.008) 0.3 (0.012)
0.2 (0.008)
0.3 (0.012)
0.45 (0.018)
0.55 (0.022)
1 (0.039)
0.5 (0.020) 0.6 (0.024) 0.25 (0.010) 0.15 (0.006) 0.5 (0.020) 0.3 (0.012) 0.15 (0.006) Solder resist mask Solder pad 0.5 (0.020)
0.60 (0.023)
1.65 (0.065) Pin 1 marking 1.55 (0.061)
1.65 (0.065)
1.55 (0.061)
Foot print recommendation: 0.5 (0.020) 0.3 (0.012) 0.15 (0.006)
0.54 (0.021)
0.25 (0.010)
1 (0.039)
Document no.:S8-V-3906.02-010 (4) Created - Date: 04. MAY 2005 Rev. 4 - Date: 21. March 2006
20454
0.5 (0.020)
1 (0.039)
0.05 (0.002) 0 (0.000)
0.2 (0.008)
0.3 (0.012)
Document Number: 81655 Rev. 1.3, 21-Oct-10
For technical questions, contact: ESDprotection@vishay.com
www.vishay.com 5
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1