VESD05A6A-HAF

VESD05A6A-HAF Vishay Semiconductors 6-Line ESD-Protection Diode Array in LLP75 Features Ultra compact LLP75-7L package 6-line ESD-protection Low leakage current IR < 0.1 µA Low load capacitance CD = 13 pF ESD-immunity acc. IEC 61000-4-2 ± 15 kV contact discharge ± 15 kV air discharge • Working voltage range VRWM = 5 V • e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC • • • • • 6 7 5 4 1 20517 2 3 19371 1 Marking (example only) XX YY 21001 Dot = Pin 1 marking XX = Date code YY = Type code (see table below) Ordering Information Device name VESD05A6A-HAF Ordering code VESD05A6A-HAF-GS08 Taped units per reel (8 mm tape on 7" reel) 3000 Minimum order quantity 15000 Package Data Device name VESD05A6A-HAF Package name LLP75-7L Type code AT Weight 4.2 mg Molding compound flammability rating UL 94 V-0 Moisture sensitivity level Soldering conditions MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ** Please see document “Vishay Material Category Policy” www.vishay.com/doc?99902 Document Number 81880 Rev. 1.2, 11-Jun-10 For technical support, please contact: ESDprotection@vishay.com www.vishay.com 1 VESD05A6A-HAF Vishay Semiconductors Absolute Maximum Ratings Rating Test condition BiAs-Mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 µs; single shot BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 µs; single shot BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2); acc. IEC 61000-4-5; tp = 8/20 µs; single shot BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Pin 2 not connected. Acc. IEC 61000-4-5; tp = 8/20 µs; single shot Acc. IEC61000-4-2; 10 pulses BiAs-mode: each input (pin 1 - pin 6) to ground (pin 2) ESD immunity Contact discharge Air discharge Symbol IPPM IPPM PPP PPP VESD VESD VESD VESD TJ TSTG Value 2.5 2.5 33 43 ± 15 ± 15 ± 10 ± 10 - 40 to + 125 - 55 to + 150 Unit A A W W kV kV kV kV °C °C Peak pulse current Peak pulse power Contact Acc. IEC 61000-4-2 ; 10 pulses discharge BiSy-mode: each input (pin 1 - pin 6) to any other input pin. Air Pin 2 not connected discharge Junction temperature Operating temperature Storage temperature Application Note: a) With the VESD05A6A-HAF 6 different signal or data lines can be clamped to ground. Due to the different clamping levels in forward and reverse direction the VESD05A6A-HAF clamping behavior is Bidirectional and Asymmetrical (BiAs). L1 L2 L3 6 7 5 4 1 2 3 L4 L5 19365 L6 b) If symmetrical clamping behaviour is required the VESD05A6A-HAF can also be used as a Bidirectional Symmetrical protection device protecting up to 5 lines. In this case pin no. 7 must not be connected. L1 L2 L3 6 7 5 4 1 2 3 L4 L5 19366 www.vishay.com 2 For technical support, please contact: ESDprotection@vishay.com Document Number 81880 Rev. 1.2, 11-Jun-10 VESD05A6A-HAF Vishay Semiconductors Electrical Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified VESD05A6A-HAF BiAs mode (between pin 1, 2, 3, 4, 5 or 6 and pin 7) Parameter Protection paths Reverse stand off voltage Max. reverse current Reverse break down voltage Reverse clamping voltage at IPP = IPPM = 2.5 A at IPP = 1 A Forward clamping voltage at IPP = IPPM = 2.5 A at VR = 0 V; f = 1 MHz Line capacitance at VR = 2.5 V; f = 1 MHz CD 8 pF VF CD 3.2 13 4 15 V pF VC VF 12 2 13 2.5 V V Test conditions/remarks Number of lines which can be protected at IR = 0.1 µA at VR = 5 V at IR = 1 mA at IPP = 1 A Symbol Nlines VRWM IR VBR VC 6 5 < 0.01 6.7 9 0.1 7.5 10 Min. Typ. Max. 6 Unit lines V µA V V Typical Characteristics Tamb = 25 C, unless otherwise specified 120 % Rise time = 0.7 ns to 1 ns 100 % 80 % 60 % 20 µs to 50 % 40 % 20 % 0% 0 20548 8 µs to 100 % Discharge Current IESD 100 % 80 % 60 % 53 % 40 % 27 % 20 % 0% - 10 0 10 20 30 40 50 60 70 80 90 100 20557 IPPM 10 20 30 40 Time (ns) Time (µs) Figure 1. ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) Figure 2. 8/20 µs Peak Pulse Current Wave Form acc. IEC 61000-4-5 Document Number 81880 Rev. 1.2, 11-Jun-10 For technical support, please contact: ESDprotection@vishay.com www.vishay.com 3 VESD05A6A-HAF Vishay Semiconductors 16 f = 1 MHz 14 12 14 Measured acc. IEC 61000-4-5 (8/20 µs - wave form) 12 10 8 reverse CD (pF) 10 VC (V) 6 4 2 0 VC 8 6 4 2 0 0 1 2 3 4 5 -2 -4 -6 0 19951 forward 0.5 1 1.5 2 2.5 3 3.5 4 19948 VR (V) IPP (A) Figure 3. Typical Capacitance CD vs. Reverse Voltage VR Figure 6. Typical Clamping Voltage vs. Peak Pulse Current IPP 100 100 80 60 acc. IEC 61000-4-2 + 8 kV contact discharge 10 IF (mA) 1 VC-ESD (V) 0.6 0.7 0.8 0.9 1 1.1 40 20 0.1 0.01 0 - 20 - 10 0 10 20 30 40 50 60 70 80 90 19994 0.001 0.5 19949 VF (V) t (ns) Figure 4. Typical Forward Current IF vs. Forward Voltage VF Figure 7. Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) 8 7 6 40 20 0 VR (V) 5 4 3 2 1 0 0.01 0.1 1 10 100 1000 10 000 VC-ESD (V) - 20 - 40 - 60 - 80 acc. IEC 61000-4-2 - 8 kV contact discharge - 100 - 10 0 10 20 30 40 50 60 70 80 90 19995 19950 IR (µA) t (ns) Figure 5. Typical Reverse Voltage VR vs. Reverse Current IR Figure 8. Typical Clamping Performance at - 8 kV Contact Discharge (acc. IEC 61000-4-2) www.vishay.com 4 For technical support, please contact: ESDprotection@vishay.com Document Number 81880 Rev. 1.2, 11-Jun-10 VESD05A6A-HAF Vishay Semiconductors 200 150 100 acc. IEC 61000-4-2 contact discharge VC-ESD (V) 50 VC-ESD 0 - 50 - 100 - 150 - 200 0 5 10 15 20 19954 VESD (kV) Figure 9. Typical max. Clamping Voltage at ESD Contact Discharge (acc. IEC 61000-4-2) Package Dimensions in millimeters (inches): LLP75-7L 1.05 (0.041) 0.95 (0.037) Heat sink 0.2 (0.008) 0.3 (0.012) 0.2 (0.008) 0.3 (0.012) 0.45 (0.018) 0.55 (0.022) 1 (0.039) 0.5 (0.020) 0.6 (0.024) 0.25 (0.010) 0.15 (0.006) 0.6 (0.024) 1.65 (0.065) Pin 1 marking 1.55 (0.061) 1.65 (0.065) Foot print recommendation: 0.5 (0.020) 0.3 (0.012) 0.15 (0.006) 0.5 (0.020) 0.3 (0.012) 0.15 (0.006) 0.25 (0.010) 1 (0.039) 0.5 (0.020) 1 (0.039) 1.55 (0.061) 0.54 (0.021) 0.05 (0.002) 0 (0.000) 0.2 (0.008) 0.3 (0.012) Solder resist mask Document no.:S8-V-3906.02-014 (4) Created - Date: 04. April 2006 20500 Solder pad 0.5 (0.020) Document Number 81880 Rev. 1.2, 11-Jun-10 For technical support, please contact: ESDprotection@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1