New Product
VFT3060C
Vishay General Semiconductor
Dual High-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.38 V at IF = 5 A
TMBS ®
ITO-220AB
FEATURES
• Trench MOS Schottky technology • Low forward voltage drop, low power losses • High efficiency operation • Solder bath temperature 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition
1 VFT3060C
PIN 1 PIN 3 PIN 2
2
3
TYPICAL APPLICATIONS
For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection.
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM VF at IF = 15 A TJ max. 2 x 15 A 60 V 170 A 0.57 V 150 °C
MECHANICAL DATA
Case: ITO-220AB Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum per
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) per device per diode IF(AV) IFSM dV/dt VAC TJ, TSTG SYMBOL VRRM VFT3060C 60 30 A 15 170 10 000 1500 - 55 to + 150 A V/μs V °C UNIT V
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Isolation voltage from termal to heatsink t = 1 min Operating junction and storage temperature range
Document Number: 89256 Revision: 18-Nov-10
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
New Product
VFT3060C
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS IF = 5.0 A IF = 7.5 A Instantaneous forward voltage per diode IF = 15 A IF = 5.0 A IF = 7.5 A IF = 15 A Reverse current per diode VR = 60 V TA = 25 °C TA = 125 °C IR (2) TA = 125 °C TA = 25 °C VF (1) SYMBOL TYP. 0.47 0.51 0.60 0.38 0.44 0.57 20 MAX. 0.70 V 0.65 1.2 mA 45 UNIT
Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER per diode Typical thermal resistance per device RθJC SYMBOL VFT3060C 6.0 °C/W 4.8 UNIT
ORDERING INFORMATION (Example)
PACKAGE ITO-220AB PREFERRED P/N VFT3060C-M3/4W UNIT WEIGHT (g) 1.76 PACKAGE CODE 4W BASE QUANTITY 50/tube DELIVERY MODE Tube
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
35
14
Average Forward Rectified Current (A)
Average Power Disspation (W)
30 25 20 15 10 5 Mounted on Specific Heatsink 0 0 25 50 75 100 125 150
12 D = 0.2 10 8 D = 0.1 6
D = 0.5 D = 0.3
D = 0.8
D = 1.0
T 4 2 0 0 2 4 6 8 10 12 14 16 18
D = tp/T
tp
Case Temperature (°C)
Average Forward Current (A)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Forward Power Dissipation Characteristics
www.vishay.com 2
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 89256 Revision: 18-Nov-10
New Product
VFT3060C
Vishay General Semiconductor
100
10
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
TA = 150 °C
Junction to Case
10
TA = 125 °C TA = 100 °C
1
1 TA = 25 °C
0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.1 0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Transient Thermal Impedance
100
10 000 TA = 150 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p
Instantaneous Reverse Current (mA)
10
TA = 125 °C TA = 100 °C
1
Junction Capacitance (pF)
1000
0.1
0.01
TA = 25 °C
0.001 20 30 40 50 60 70 80 90 100
100 0.1 1 10 100
Percent of Rated Peak Reverse Voltage (%)
Reverse Voltage (V)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AB
0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF.
7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54)
45° REF.
0.600 (15.24) 0.580 (14.73)
PIN
0.671 (17.04) 0.651 (16.54)
7° REF. 0.350 (8.89) 0.330 (8.38)
1
2
3
7° REF.
0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41)
0.191 (4.85) 0.171 (4.35)
0.110 (2.79) 0.100 (2.54)
0.057 (1.45) 0.045 (1.14)
0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95)
0.028 (0.71) 0.020 (0.51)
Document Number: 89256 Revision: 18-Nov-10
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
