VHP203TP120K50UB

VHP203 (Z-Foil) Vishay Foil Resistors Hermetically Sealed Miniature Ultra High Precision Z-Foil Technology Resistors with TCR of 0.05 ppm/°C, Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 %, Unaffected by Humidity FEATURES • Temperature coefficient of resistance (TCR): ± 0.05 ppm/°C (0 °C to 60 °C) Pb-free Available • Power coefficient “ΔR due to self heating”: 5 ppm at rated power RoHS* COMPLIANT • Tolerance: to ± 0.001 % (10 ppm) • Load life stability: ± 0.002 % maximum ΔR (60 °C for 2000 h at 0.1 W per chip) • Electrostatic discharge (ESD) > 25 000 V • Resistance range: 10 Ω to 150 kΩ (higher or lower values of resistance available) • Power rating: 0.3 W at + 25 °C • Shelf life stability: 2 ppm for at least 10 years • Non inductive, non capacitive design • Non hot spot design • Rise time: 1.0 ns without ringing • Current noise: < - 40 dB • Thermal EMF: 0.05 µV/°C typical • Voltage coefficient: < 0.1 ppm/V • Non inductive: < 0.08 µH • Terminal finishes available: lead (Pb)-free tin/lead alloy • Impervious to harmful environments - oil filled • For better performances, please contact us • Prototype samples available from 24 h. For more information, please contact foil@vishay.com Any value available within resistance range INTRODUCTION The Z-foil based oil filled, hermetically sealed VHP203 resistor represents an industry breakthrough. The hermetic sealing eliminates the ingress of moisture and oxygen, while the oil acts as a thermal conductor, thus eliminating long term degradation of elements of unsealed resistors, while at the same time allowing the device to accept short periods of overload without degradation. The VHP203 is also available with laboratory and metrology level precision and long term stability with additional inhouse oriented process such as: special TCR plotting, chip stabilitzation inhouse thermal shock and bake prior to sealing, combined thermal shock and power conditioning on finished product, thermal and power conditioning, CLT. The Z-foil technology provides a significant reduction of the resistive components sensitivity to ambient temperature variations (TCR) and applied power changes (PCR). When combined with the hermetic sealing and oil filling, the VHP203 resistor become the most precise and stable resistor available. The value of the hermetic enclosure over the molded part is in long term performance. With accuracy of ± 0.001 % (10 ppm) and a resistance range from 10 Ω to 150 kΩ and long term shelf life of less than 2 ppm, this device is virtually a secondary standard that can be carried in sets for daily or periodic calibration of factory measurement equipment. APPLICATIONS • • • • Metrology Laboratory Industrial Measurement FIGURE 1 - TRIMMING TO VALUES (Conceptual Illustration) TABLE 1 - TCR VS. RESISTANCE VALUE RESISTANCE VALUE (Ω) 100 to < 150K 50 to < 100 10 to < 50 TYPICAL TCR AND MAX. SPREAD (- 55 °C to + 125 °C, + 25 °C ref.) (ppm/°C)1) ± 0.2 ± 2 ± 0.2 ± 3 ± 0.2 ± 4 Mutual Inductance Reduction due to Opposing Current in Adjacent Lines Interloop Capacitance Reduction in Series Current Path Before Trimming Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Note 1. For lower TCR and for selected TCR tracking, please contact us Note: Foil shown in black, etched spaces in white * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 63146 Revision: 06-May-08 For any questions, contact: foil@vishay.com www.vishay.com 1 VHP203 (Z-Foil) Vishay Foil Resistors Hermetically Sealed Miniature Ultra High Precision Z-Foil Technology Resistors with TCR of 0.05 ppm/°C, Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 %, Unaffected by Humidity POWER RATING at + 25 °C AVERAGE WEIGHT (g) TABLE 2 - MODEL SELECTION MODEL NUMBER RESISTANCE RANGE (Ω) MAXIMUM WORKING VOLTAGE1) CONSTRUCTION BRIEF DIMENSIONS INCHES W: 0.185 ± 0.020 L: 0.435 ± 0.020 H: 0.375 ± 0.020 LL: 1.000 ± 0.125 LS: 0.150 ± 0.0102) ST: 0.095 Max. mm 4.70 ± 0.51 11.05 ± 0.51 10.92 ± 0.51 25.4 ± 3.18 3.81 ± 0.25 2.41 Max. VHP203 VHP203J 10 to 66K 66K to 150K 300 0.3 W 0.2 W 1.4 Oil-filled, tinned copper leads, nickel shell, kovar and glass header Note • See next page for numbered footnotes TABLE 3 - STANDARD RESISTANCE TOLERANCE TIGHTEST (Ω) 1K to 150K 500R to 1K 50R to 500R 30R to 50R 20R to 30R 10R to 20R Note • See next page for numbered footnotes LOOSEST (%) ± 0.001 ± 0.0025 ± 0.005 ± 0.01 ± 0.02 ± 0.05 FIGURE 2 - TYPICAL TCR CURVE Z-FOIL + 500 + 400 + 300 + 200 + 100 ∆R 0 R (ppm) - 100 - 200 - 300 - 400 - 500 - 55 - 25 0 + 25 + 60 + 75 + 100 + 125 - 0.16 ppm/°C FIGURE 3 - POWER DERATING CURVE Percent of Rated Power + 100 + 75 + 50 + 25 0 - 55 °C 0.05 ppm/°C - 0.1 ppm/°C 0.1 ppm/°C 0.14 ppm/°C 0.2 ppm/°C - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Ambient Temperature (°C) Ambient Temperature (°C) FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS Front View L VISHAY XXXX VHP203 Rear View W 100R01 0.01% XXXX ST Date Code 07 06 Year Week LS LL Lead Material #22 AWG Round Solder Coated Copper Resistance Value Code Tolerance Serial No. H Model Number www.vishay.com 2 For any questions, contact: foil@vishay.com Document Number: 63146 Revision: 06-May-08 VHP203 (Z-Foil) Hermetically Sealed Miniature Ultra High Precision Z-Foil Technology Vishay Foil Resistors Resistors with TCR of 0.05 ppm/°C, Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 %, Unaffected by Humidity TABLE 3 - “H” SERIES SPECIFICATIONS Stability6) Load life at 2000 h Shelf life Current Noise High Frequency Operation Rise time Inductance (L)3) Capacitance (C) Voltage Coefficient Thermal EMF5) Hermeticity Notes 1. Not to exceed power rating of resistor 2. 0.200" (5.08 mm) lead spacing available - specify VHP203J 3. Inductance (L) due mainly to the leads 4. The resolution limit of existing test equipment (within measurement capability of the equipment, or “essentially zero”) 5. µV/°C relates to EMF due to lead temperature difference and µV/W due to power applied to the resistor 6. Load life ΔR max. can be reduced through in-house oriented processes 1.0 ns without ringing 0.1 µH maximum; 0.08 µH typical 1.0 pF maximum; 0.5 pF typical < 0.1 ppm/V4) 0.1 µV/°C maximum; 0.05 µV/°C typical; 1 µV/W maximum 10-7 atmospheric cc/s maximum ± 0.002 % maximum ΔR at 0.1 W per chip and at + 60 °C ± 2 ppm (0.0002 %) after at least 10 years < 0.010 µV (RMS)/V of applied voltage (- 40 dB) TABLE 4 - ENVIRONMENTAL PERFORMANCE COMPARISON MIL-PRF-55182 CHAR J Test Group I Thermal shock, 5 x (- 55 °C to + 125 °C) Short time overload, 6.25 x rated power, 5 s Test Group II Resistance temperature characteristics Characteristic Low temperature storage (24 h at - 65 °C) Low temperature operation (45 min, rated power at - 65 °C) Terminal strength Test Group III DWV Resistance to solder heat, 20 s at + 260 °C Moisture resistance Test Group IV Shock Vibration Test Group V Life test at 0.3 W at + 25 °C 2000 h Test Group Va Life test at 0.1 W at + 60 °C Test Group VI High temperature exposure (2000 h at + 125 °C) Test Group VII Voltage coefficient Document Number: 63146 Revision: 06-May-08 5 ppm/V < 0.1 ppm/V < 0.1 ppm/V www.vishay.com 3 ± 2.0 % ± 0.02 % (200 ppm) ± 0.005 % (50 ppm) ± 0.5 % ± 0.008 % (80 ppm) ± 0.002 % (20 ppm) ± 0.5 % ± 0.008 % (80 ppm) ± 0.002 % (20 ppm) ± 0.2 % ± 0.2 % ± 0.01 % (100 ppm) ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) ± 0.002 % (20 ppm) ± 0.15 % ± 0.1 % ± 0.4 % ± 0.01 % (100 ppm) ± 0.01 % (100 ppm) ± 0.005 % (50 ppm) ± 0.002 % (20 ppm) ± 0.005 % (50 ppm) ± 0.001 % (10 ppm) ± 0.15 % ± 0.15 % ± 0.2 % ± 0.01 % (100 ppm) ± 0.01 % (100 ppm) ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) ± 0.002 % (20 ppm) ± 0.002 % (20 ppm) ± 25 ppm/°C table 1 ± 0.05 ppm/°C ± 0.2 % ± 0.2 % ± 0.01 % (100 ppm) ± 0.01 % (100 ppm) ± 0.002 % (20 ppm) ± 0.003 % (30 ppm) VHP203 MAXIMUM ΔR VHP203 TYPICAL ΔR For any questions, contact: foil@vishay.com VHP203 (Z-Foil) Vishay Foil Resistors Hermetically Sealed Miniature Ultra High Precision Z-Foil Technology Resistors with TCR of 0.05 ppm/°C, Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 %, Unaffected by Humidity TABLE 5 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y6072120K500V9L (preferred part number format) DENOTES PRECISION Y VALUE R=Ω K = kΩ AER* 0 = standard product, tin/lead termination 1 = with plastic sleeve, tin/lead termination 9 = standard product, lead (Pb)-free termination 19 = with plastic sleeve, lead (Pb)-free termination Other = custom Y 6 0 7 2 1 2 0 K 5 0 0 V 9 L PRODUCT CODE 6072 = VHP203 6073 = VHP203J RESISTANCE TOLERANCE S = ± 0.001 % U = ± 0.002 % X = ± 0.0025 % V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % PACKAGING L = bulk pack FOR EXAMPLE: ABOVE GLOBAL ORDER Y6072 120K500 V 9 L: TYPE: VHP203 VALUE: 120.5 kΩ ABSOLUTE TOLERANCE: ± 0.005 % TERMINATION: lead (Pb)-free PACKAGING: bulk pack HISTORICAL PART NUMBER: VHP203T 120K50 V B (will continue to be used) VHP203 MODEL VHP203 VHP203J T TERMINATION T = lead (Pb)-free None = tin/lead PLASTIC SLEEVE P = plastic sleeve None = standard 120K50 OHMIC VALUE 120K50 = 120.5 kΩ V TOLERANCE S = ± 0.001 % U = ± 0.002 % X = ± 0.0025 % V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % B PACKAGING B = bulk pack Note * Application engineering release: for non-standard requests, please contact application engineering. www.vishay.com 4 For any questions, contact: foil@vishay.com Document Number: 63146 Revision: 06-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1