VJ1210Y682

VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications FEATURES • Surface mountable, precious metal technology, wet build process • OMD-Cap (Open Mode Design) reduce the risk of short or low IR because of board flex cracks • Efficient low-power consumption, ripple current capaple to 1.2 Arms at 100 kHz • High Voltage breakdown compared to standard design • Available with 100 % voltage condition, process code “5H” (Is available for 630 V and lower. Contact mlcc.specials@vishay.com for higher voltages.) • Excellent reliability and thermal shock performance • Available with polymer termination for increase resistance to board flex cracking • Protective surface coating of high voltage capacitors maybe required to prevent surface arcing APPLICATIONS • Ideal for Power Supplies • Input filter capacitor ELECTRICAL SPECIFICATIONS Note: Electrical characteristics at + 25 °C unless otherwise stated Protective surface coating of high voltage capacitors maybe required to prevent surface arcing. Input side filter. Operating Temperature: - 55 °C to + 125 °C Capacitance Range: 100 pF to 1.8 µF Voltage Rating: 16 Vdc to 3000 Vdc Temperature Coefficient of Capacitance (TCC): X7R: ± 15 % from - 55 °C to + 125 °C, with 0 Vdc applied Dissipation Factor: 6.3 V, 10 V ratings: 5 % max. at 1.0 Vrms and 1 kHz 16 V, 25 V ratings: 3.5 % max. at 1.0 Vrms and 1 kHz Š 50 V ratings: 2.5 % max. at 1.0 Vrms and 1 kHz Aging Rate: 1 % maximum per decade Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 MW minimum or 1000 WF, whichever is less At + 125 °C and rated voltage 10 000 MW minimum or 100 WF, whichever is less Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA ≤ 250 Vdc: DWV at 250 % of rated voltage 500 Vdc: DWV at 200 % of rated voltage 630 Vdc: DWV at 150 % of rated voltage 1000 Vdc: DWV at 150 % of rated voltage 1500 Vdc: DWV at 120 % of rated voltage 2000 Vdc: DWV at 120 % of rated voltage 3000 Vdc: DWV at 120 % of rated voltage Document Number: 45046 Revision: 28-Oct-08 For technical questions, contact: mlcc.specials@vishay.com www.vishay.com 97 VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications DIMENSIONS in inches [millimeters] W L T MAX. P PART ORDERING NUMBER VJ0805 VJ1206 VJ1210 VJ1808 VJ1812 VJ1825 VJ2220 VJ2225 LENGTH (L) 0.126 ± 0.008 [2.00 ± 0.20] 0.126 ± 0.008 [3.20 ± 0.20] 0.126 ± 0.008 [3.20 ± 0.20] 0.180 ± 0.010 [4.57 ± 0.25] 0.177 ± 0.010 [4.50 ± 0.25] 0.177 ± 0.010 [4.50 ± 0.25] 0.220 ± 0.008 [5.59 ± 0.20] 0.220 ± 0.010 [5.59 ± 0.25] WIDTH (W) 0.049 ± 0.008 [1.25 ± 0.20] 0.063 ± 0.008 [1.60 ± 0.20] 0.098 ± 0.008 [2.50 ± 0.20] 0.080 ± 0.010 [2.03 ± 0.25] 0.126 ± 0.008 [3.20 ± 0.20] 0.252 ± 0.010 [6.40 ± 0.25] 0.200 ± 0.008 [5.08 ± 0.20] 0.250 ± 0.010 [6.35 ± 0.25] MAXIMUM THICKNESS (T) 0.057 [1.45] 0.067 [1.70] 0.067 [1.70] 0.086 [2.18] 0.086 [2.18] 0.086 [2.18] 0.086 [2.18] 0.086 [2.18] TERMINATION PAD (P) MINIMUM 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] MAXIMUM 0.028 [0.71] 0.028 [0.71] 0.028 [0.71] 0.030 [0.76] 0.030 [0.76] 0.030 [0.76] 0.030 [0.76] 0.030 [0.76] ORDERING INFORMATION VJ1210 CASE SIZE 0805 1206 1210 1808 1812 1825 2220 2225 Y 474 K X TERMINATION X = Ni barrier 100 % tin plate matte finish F = AgPd B = Polymer 100 % tin plate matte finish A DC VOLTAGE RATING (1) J = 16 X = 25 A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V G = 1000 V R = 1500 V F = 2000 V H = 3000 V A MARKING T PACKAGING ## (2) PROCESS CODE DIELECTRIC CAPACITANCE CAPACITANCE CODE TOLERANCE Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Example: 474 = 470 000 pF J=±5% K = ± 10 % M = ± 20 % A = Unmarked T = 7" Reels 4X = OMD Cap 5H = OMD Cap R = 11 1/4" 100 % voltage Reels conditioning B = Bulk W = Waffle tray Notes: (1) DC voltage rating should not be exceeded in application (2) Process code with 2 digits has to be added Polymer plus termination “B” termination part number code length dimensions positive tolerances (including bandwidth) above are allowed to increase by the following amounts. 1206 and smaller case sizes: Length 0.002 " (0.05 mm) 1210 and larger case sizes: Length 0.004 " (0.1 mm) www.vishay.com 98 For technical questions, contact: mlcc.specials@vishay.com Document Number: 45046 Revision: 28-Oct-08 VJ OMD - X7R Surface Mount Multilayer Ceramic Chip Capacitor Solutions Vishay Vitramon for Boardflex Sensitive Applications OMD - X7R CAPACITANCE RANGE EIA CODE VOLTAGE (Vdc) CAP. CODE 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 CAP. 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 µF 0.012 µF 0.015 µF 0.018 µF 0.022 µF 0.027 µF 0.033 µF 0.039 µF 0.047 µF 0.056 µF 0.068 µF 0.082 µF 0.10 µF 0.12 µF 0.15 µF 0.18 µF 0.22 µF 0.27 µF 0.33 µF 0.39 µF 0.47 µF 0.56 µF 0.68 µF 0.82 µF 1.0 µF 1.2 µF 1.5 µF 1.8 µF 2.2 µF 0805 16 25 50 100 200 500 630 16 25 50 100 1206 200 500 630 1000 1500 2000 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Document Number: 45046 Revision: 28-Oct-08 For technical questions, contact: mlcc.specials@vishay.com www.vishay.com 99 VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications OMD - X7R CAPACITANCE RANGE EIA CODE VOLTAGE (Vdc) CAP. CODE 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 CAP. 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 µF 0.012 µF 0.015 µF 0.018 µF 0.022 µF 0.027 µF 0.033 µF 0.039 µF 0.047 µF 0.056 µF 0.068 µF 0.082 µF 0.10 µF 0.12 µF 0.15 µF 0.18 µF 0.22 µF 0.27 µF 0.33 µF 0.39 µF 0.47 µF 0.56 µF 0.68 µF 0.82 µF 1.0 µF 1.2 µF 1.5 µF 1.8 µF 2.2 µF 1210 (1) 16 25 50 100 200 500 630 1000 1500 2000 630 1000 1808 (1) 1500 2000 3000 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 www.vishay.com 100 For technical questions, contact: mlcc.specials@vishay.com Document Number: 45046 Revision: 28-Oct-08 VJ OMD - X7R Surface Mount Multilayer Ceramic Chip Capacitor Solutions Vishay Vitramon for Boardflex Sensitive Applications OMD - X7R CAPACITANCE RANGE EIA CODE VOLTAGE (Vdc) CAP. CAP. CODE 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 µF 123 0.012 µF 153 0.015 µF 183 0.018 µF 203 0.020 µF 223 0.022 µF 273 0.027 µF 333 0.033 µF 393 0.039 µF 473 0.047 µF 563 0.056 µF 683 0.068 µF 823 0.082 µF 104 0.10 µF 124 0.12 µF 154 0.15 µF 184 0.18 µF 224 0.22 µF 274 0.27 µF 334 0.33 µF 394 0.39 µF 474 0.47 µF 564 0.56 µF 684 0.68 µF 824 0.82 µF 105 1.0 µF 125 1.2 µF 155 1.5 µF 185 1.8 µF 225 2.2 µF 50 100 200 250 1812 (1) 500 630 1000 1500 2000 3000 100 200 500 1825 (1) 630 1000 1500 2000 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Document Number: 45046 Revision: 28-Oct-08 For technical questions, contact: mlcc.specials@vishay.com www.vishay.com 101 VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications OMD - X7R CAPACITANCE RANGE EIA CODE VOLTAGE (Vdc) CAP. CODE 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 203 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 564 684 824 105 125 155 185 225 CAP. 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2200 pF 2700 pF 3300 pF 3900 pF 4700 pF 5600 pF 6800 pF 8200 pF 0.010 µF 0.012 µF 0.015 µF 0.018 µF 0.020 µF 0.022 µF 0.027 µF 0.033 µF 0.039 µF 0.047 µF 0.056 µF 0.068 µF 0.082 µF 0.10 µF 0.12 µF 0.15 µF 0.18 µF 0.22 µF 0.27 µF 0.33 µF 0.39 µF 0.47 µF 0.56 µF 0.68 µF 0.82 µF 1.0 µF 1.2 µF 1.5 µF 1.8 µF 2.2 µF 50 100 200 250 2220 (1) 500 630 1000 2000 30000 100 200 500 2225 (1) 630 1000 1500 2000 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Note: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 www.vishay.com 102 For technical questions, contact: mlcc.specials@vishay.com Document Number: 45046 Revision: 28-Oct-08 VJ OMD - X7R Surface Mount Multilayer Ceramic Chip Capacitor Solutions Vishay Vitramon for Boardflex Sensitive Applications OMD - CAPACITORS - TYPICAL PARAMETERS IMPEDANCE VS. FREQUENCY X7R 500/630 V 1000 1000.000 IMPEDANCE VS. FREQUENCY X7R 2000 V 100 100.000 IMPEDANCE (Ω) 10 IMPEDANCE (Ω) 10.000 4.7 nF 1.000 2.2 nF 1 nF 1 1 µF 0.1 µF 0.01 µF 0.1 0.01 0.01 0.1 1 10 100 0.100 1 10 100 1000 FREQUENCY (MHz) VOLTAGE COEFFICIENT OF CAPACITANCE X7R OMD - CAP 10 0 10 0 FREQUENCY (MHz) VOLTAGE COEFFICIENT OF CAPACITANCE X7R % CAPACITANCE CHANGE - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 0 100 200 300 400 500 600 700 100 V Rated 200 V Rated % CAPACITANCE CHANGE - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 0 500 1000 1500 2000 2500 1000/1500 V RATED 2000 V RATED DC VOLTS APPLIED VOLTAGE COEFFICIENT OF CAPACITANCE X7R 500/630 V LOWER CAPACITANCE 10 10 0 DC VOLTS APPLIED VOLTAGE COEFFICIENT OF CAPACITANCE X7R OMD - CAP - 500/630 V HIGHER CAPACITANCE % CAPACITANCE CHANGE % CAPACITANCE CHANGE 0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 0 100 200 300 400 500 600 700 Case Size 1206 1210 1808 1812 Range 100 pF to 4700 pF 390 pF to 10 000 pF 470 pF to 18 000 pF 1000 pF to 27 000 pF - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 0 100 200 Case Size 1206 1210 1812 Range 5600 pF to 18 000 pF 12 000 pF to 39 000 pF 33 000 pF to 100 000 pF 300 400 500 600 700 DC VOLTS APPLIED DC VOLTS APPLIED Document Number: 45046 Revision: 28-Oct-08 For technical questions, contact: mlcc.specials@vishay.com www.vishay.com 103 VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications BOARDFLEX SENSITIVE APPLICATIONS - SOLUTION: A predominant failure mode in multilayer ceramic chip capacitors is cracking caused by board flexure. Cracks can then create a path for current to pass from one electrode through the dielectric to an opposing electrode or from the terminations at one end of the MLCC through the dielectric to an opposing electrode. This may subsequently result in capacitance loss, leakage - low Insulation Resistance (IR) - and/or more seriously, high current shorts. A short circuit condition in the surface mounted capacitors can cause further failures of downstream components. Vishay’s Open Mode Design Capacitors (VJ OMD - Cap series) reduce the risk of these destructive conditions through MLCC designs that prevent board flexure cracks reaching the opposing electrode. VJ OMD - Cap MLCCs reduce the risk of early field failures associated with board flex cracks. However, it is important to note that even in the open mode designs the presence of flexure related cracks can cause capacitance loss leading to localized stresses on the parts. eventually, depending on the application environment, including such factors and high voltage pulse frequency and thermal cycling this may lead to internal breakdown of the component. POLYMER TERMINATION Polymer termination provides additional protection against board flexure damage by absorbing greater mechanical and thermal stresses. Componenets can be packaged, transported, stored and handled the same standard terminated product. Wave and reflow soldering of MLCC does not require modification to equipment and/or process. Polymer termination greatly reduces the risk of mechanical cracking however it does not completely eliminate. STANDARD TERMINATION Exposed Electrodes = Electrical Short OMD CAP PLUS POLYMER TERMINATION No Exposed Electrodes = No Electrical Short BEND TEST RESULTS 2220 CASE SIZE 100 % FAILED PERCENTAGE OF PARTS 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 10 % 0% 0.0 1.0 Standard Termination Polymer Termination Log. (Standard Termination) Log. (Polymer Termination) 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 BOARD FLEXURE in mm www.vishay.com 104 For technical questions, contact: mlcc.specials@vishay.com Document Number: 45046 Revision: 28-Oct-08 VJ OMD - X7R Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications STANDARD PACKAGING QUANTITIES 7" REEL QUANTITIES BODY SIZE 0805 TAPE SIZE 8 mm PAPER TAPE PACKAGING CODE “C” 3000 (1) (2) (3) 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING CODE “P” 10 000 PLASTIC TAPE PACKAGING CODE “R” 10 000 BULK QUANTITIES VIAL PACKAGING CODE “B” 5000 WAFFLE PACKAGING CODE “W” N/a PLASTIC TAPE PACKAGING CODE “T” 3000 1206 8 mm N/a 2500 N/a 10 000 5000 5000 1210 8 mm N/a 3000 N/a 10 000 5000 N/a 1808 12 mm N/a 3000 N/a 10 000 1000 N/a 1812 12 mm N/a 1000 N/a 5000 1000 N/a 1825 12 mm N/a 1000 N/a 5000 1000 1000 2220 12 mm N/a 1000 N/a 5000 N/a 1000 2225 Notes: (1) 12 mm N/a 1000 N/a 5000 N/a 1000 Vishay Vitramon uses embossed plastic and punch paper carrier tapes. Paper tape is not available for case sizes > 1206 or for component thickness > 0.035" [0.89 mm] REFERENCE: EIA Standard RS 481 -“Taping of Surface Mount Components for Automatic Placement” = Not available (2) (3) N/a www.vishay.com 105 For technical questions, contact: mlcc.specials@vishay.com Document Number: 45046 Revision: 28-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1