VLMB41P1Q1-GS08

VLMB41.. Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • EIA and ICE standard package • Compatible with IR reflow, vapor phase e3 and wave solder processes acc. to CECC 00802 and J-STD-020C • Available in 8 mm tape reel • Lead (Pb)-free device • Preconditioning: according to JEDEC level 2a • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B • Automotive qualified AEC-Q101 19225 DESCRIPTION This device has been designed to meet the increasing demand for blue SMD LED. The package of the VLMB41.. is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with clear epoxy. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 • Product series: standard • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: indicator and backlighting in telephone and fax • Backlighting for audio and video equipment • Backlighting in office equipment • Indoor and outdoor message boards • Flat backlight for LCDs, switches and symbols • Illumination purposes, alternative to incandescent lamps • General use PARTS TABLE PART VLMB41P1Q2-GS08 VLMB41P1Q2-GS18 VLMB41P1Q1-GS08 VLMB41P1Q1-GS18 VLMB41P2Q2-GS08 VLMB41P2Q2-GS18 COLOR, LUMINOUS INTENSITY Blue, IV = (45 to 112) mcd Blue, IV = (45 to 112) mcd Blue, IV = (45 to 90) mcd Blue, IV = (45 to 90) mcd Blue, IV = (56 to 112) mcd Blue, IV = (56 to 112) mcd TECHNOLOGY InGaN on Sapphire InGaN on Sapphire InGaN on Sapphire InGaN on Sapphire InGaN on Sapphire InGaN on Sapphire Document Number 81641 Rev. 1.2, 23-Oct-07 www.vishay.com 1 VLMB41.. Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS1) VLMB41.. PARAMETER DC forward current Surge forward current Power dissipation Junction temperature Storage temperature range Operating temperature range Thermal resistance junction/ ambient mounted on PC board (pad size > 16 mm2) TEST CONDITION Tamb ≤ 80 °C tp ≤ 10 µs SYMBOL IF IFSM PV Tj Tstg Tamb RthJA VALUE 20 0.1 84 110 - 40 to + 100 - 40 to + 100 360 UNIT mA A mW °C °C °C K/W Note: 1) T amb = 25 °C, unless otherwise specified OPTICAL AND ELECTRICAL CHARACTERISTICS1) VLMB41.., BLUE PARAMETER Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Temperature coefficient of VF Temperature coefficient of IV Note: Not designed for reverse operation 1) Tamb = 25 °C, unless otherwise specified TEST CONDITION IF = 10 mA IF = 10 mA IF = 10 mA IF = 10 mA IF = 20 mA IF = 10 mA IF = 10 mA PART VLMB41P1Q2 VLMB41P1Q1 VLMB41P2Q2 SYMBOL IV IV IV λd λp ϕ VF TCVF TCIV MIN 45 45 56 462 464 ± 60 3.2 -3 - 0.4 4.2 TYP. MAX 112 90 112 476 UNIT mcd mcd mcd nm nm deg V mV/K %/K LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD P Q 1 2 1 2 LIGHT INTENSITY (MCD) OPTIONAL MIN 45 56 71 90 MAX 56 71 90 112 COLOR CLASSIFICATION BLUE GROUP 3 4 5 DOM. WAVELENGTH (NM) MIN. 462 466 470 MAX. 468 472 476 Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups are not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups are not be orderable. Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. CROSSING TABLE VISHAY VLMB41.. OSRAM LBT67C www.vishay.com 2 Document Number 81641 Rev. 1.2, 23-Oct-07 VLMB41.. Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 30 100 IF - Forward Current (mA) 20 IF - Forward Current (mA) 10 10 0 0 20913 1 20 40 60 80 100 120 20519 2.5 3.0 3.5 4.0 4.5 Tamb - Ambient Temperature (°C) VF - Forward Voltage (V) Figure 1. Forward Current vs. Ambient Temperature Figure 4. Forward Current vs. Forward Voltage 0° 10° 20° 30° IV rel - Relative Luminous Intensity 10 IV rel - Relative Luminous Intensity 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 1 0.1 95 10319 1 20520 10 IF - Forward Current (mA) 100 Figure 2. Rel. Luminous Intensity vs. Angular Displacement Figure 5. Relative Luminous Intensity vs. Forward Current Relative Dominant Wavelength (nm) 1.010 1.50 IV rel - Relative Luminous Intensity 1 10 IF - Forward Current (mA) 100 20221 1.005 1.25 1.000 1.00 0.995 0.75 0.990 20518 0.50 0 10 20 30 40 50 60 70 80 90 Tamb - Ambient Temperature (°C) Figure 3. Relative Dominant Wavelength vs. Forward Current Figure 6. Rel. Luminous Intensity vs. Ambient Temperature Document Number 81641 Rev. 1.2, 23-Oct-07 www.vishay.com 3 VLMB41.. Vishay Semiconductors 3.65 3.60 VF - Forward Voltage (V) 3.55 3.50 3.45 3.40 3.35 3.30 3.25 0 20114 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Figure 7. Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters Mounting Pad Layout 1.2 area covered with solder resist 2.6 (2.8) 4 1.6 (1.9) 20541 A Protection Diode C 20242 www.vishay.com 4 4 Document Number 81641 Rev. 1.2, 23-Oct-07 VLMB41.. Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3.../.4... - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 120° 10.4 8.4 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 Identification Label: Vishay Type Group Tape Code Production Code Quantity Adhesive Tape 321 329 14.4 max. 18857 Blister Tape Figure 10. Reel Dimensions - GS18 SOLDERING PROFILE Component Cavity 94 8670 IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level 2a 300 TAPING OF VLM.3.../.4... 250 Temperature (°C) 3.5 3.1 2.2 2.0 255 °C 240 °C 217 °C max. 30 s max. 260 °C 245 °C 200 150 max. 120 s 100 50 max. ramp up 3 °C/s max. ramp down 6 °C/s max. 100 s 5.75 5.25 3.6 3.4 1.85 1.65 4.0 3.6 8.3 7.7 1.6 1.4 4.1 3.9 2.05 1.95 4.1 3.9 0.25 0 0 19885 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 94 8668 Figure 8. Tape Dimensions in mm for PLCC-2 Figure 11. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020C) REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 120° 10.0 9.0 TTW Soldering 300 250 Temperature (°C) 200 150 100 50 0 235 °C...260 °C first wave ca. 200 K/s 100 °C...130 °C 5s (acc. to CECC00802) 948626-1 Lead Temperature second wave ca. 2 K/s full line: typical dotted line: process limits 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay Type Group Tape Code Production Code Quantity 2 K/s forced cooling ca. 5 K/s 180 178 14.4 max. 94 8665 0 50 100 Time (s) 150 200 250 Figure 9. Reel Dimensions - GS08 Figure 12. Double Wave Soldering of Opto Devices (all Packages) Document Number 81641 Rev. 1.2, 23-Oct-07 www.vishay.com 5 VLMB41.. Vishay Semiconductors BAR CODE PRODUCT LABEL EXAMPLE: 106 A H VISHAY 37 B C D E F G 20216 A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: R1 = code for luminous intensity group 5L = code for chrom. coordinate group D) Date code year/week E) Day code (e.g. 4: Thursday) F) Batch no. G) Total quantity H) Company code DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/ nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. LEVEL This bag contains MOISTURE –SENSITIVE DEVICES CAUTION 2a 1. Shelf life in sealed bag 12 months at