VLMW33T2U2-5K8L-08

VLMW33.. Vishay Semiconductors Power SMD LED PLCC-2 FEATURES • High efficient InGaN technology • Chromaticity coordinate categorized acc. to CIE1931 per packing unit e3 • Typical color temperature 5500 K • ESD-withstand voltage: up to 1 kV according to JESD22-A114-B • EIA and ICE standard package • Compatible with IR-reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020C • Available in 8 mm tape reel • Lead (Pb)-free device • Preconditioning: according to JEDEC level 2a • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • Automotive qualified AEC-Q101 APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: indicator and backlighting in telephone and fax • Backlighting for audio and video equipment • Backlighting in office equipment • Indoor and outdoor message boards • Flat backlight for LCDs, switches and symbols • Illumination purposes, alternative to incandescent lamps • General use 19225 DESCRIPTION This device has been designed to meet the increasing demand for white SMD LED. The package of the VLMW33.. is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled with a mixture of epoxy and TAG phosphor. The TAG phosphor converts the blue emission partially to yellow, which mixes with the remaining blue to give white. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 • Product series: power • Angle of half intensity: ± 60° PARTS TABLE PART VLMW33S2V1-5K8L-08 VLMW33S2V1-5K8L-18 VLMW33T2U2-5K8L-08 VLMW33T2U2-5K8L-18 VLMW33U2AA-5K8L-08 VLMW33U2AA-5K8L-18 VLMW33T2AA-5K8L-08 VLMW33T2AA-5K8L-18 COLOR, LUMINOUS INTENSITY White, IV = (224 to 900) mcd White, IV = (224 to 900) mcd White, IV = (355 to 710) mcd White, IV = (355 to 710) mcd White, IV = (560 to 1400) mcd White, IV = (560 to 1400) mcd White, IV = (355 to 1400) mcd White, IV = (355 to 1400) mcd TECHNOLOGY InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC InGaN/TAG on SiC Document Number 81273 Rev. 1.5, 25-Oct-07 www.vishay.com 1 VLMW33.. Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS1) VLMW33.. PARAMETER Reverse voltage2) DC Forward current Surge forward current Power dissipation Junction temperature Storage temperature range Operating temperature range Thermal resistance junction/ambient mounted on PC board (pad size > 16 mm2) Tamb ≤ 70 °C tp ≤ 10 µs TEST CONDITION SYMBOL VR IF IFSM PV Tj Tstg Tamb RthJA VALUE 5 30 0.1 127 110 - 40 to + 100 - 40 to + 100 400 UNIT V mA A mW °C °C °C K/W Note: 1) T amb = 25 °C, unless otherwise specified 2) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS1) VLMW33.., WHITE PARAMETER TEST CONDITION PART VLMW33S2V1 Luminous intensity IF = 20 mA VLMW33T2U2 VLMW33U2AA VLMW33T2AA Chromaticity coordinate x acc. to CIE 1931 Chromaticity coordinate y acc. to CIE 1931 Angle of half intensity Forward voltage Reverse voltage Temperature coefficient of VF Temperature coefficient of IV 1) SYMBOL IV IV IV IV x y ϕ VF VR TCVF TCIV MIN 224 355 560 355 TYP. MAX 900 710 1400 1400 UNIT mcd mcd mcd mcd IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IR = 10 µA IF = 20 mA IF = 20 mA VLMW33.. VLMW33.. 0.33 0.33 ± 60 3.7 5 -4 - 0.5 4.2 deg V V mV/K %/K Note: Tamb = 25 °C, unless otherwise specified LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD S T U V AA 1 2 1 2 1 2 1 2 1 LIGHT INTENSITY (MCD) OPTIONAL MIN 180 224 280 355 450 560 710 900 1120 MAX 224 280 355 450 560 710 900 1120 1400 In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. CROSSING TABLE VISHAY VLMW33S2V1 VLMW33T2U2 OSRAM LWT67C-S2V1 LWT67C-T2U2 Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above Type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). www.vishay.com 2 Document Number 81273 Rev. 1.5, 25-Oct-07 VLMW33.. Vishay Semiconductors CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED X 0.291 5L 0.285 0.307 0.310 0.296 5K 0.291 0.310 0.313 0.310 6L 0.307 0.330 0.330 0.313 6K 0.310 0.330 0.330 Y 0.268 0.279 0.312 0.297 0.259 0.268 0.297 0.284 0.297 0.312 0.347 0.330 0.284 0.297 0.330 0.310 8K 8L 7K 7L X 0.330 0.330 0.347 0.345 0.330 0.330 0.338 0.352 0.345 0.347 0.367 0.364 0.352 0.338 0.364 0.360 Y 0.330 0.347 0.371 0.352 0.310 0.330 0.342 0.344 0.352 0.371 0.401 0.380 0.344 0.342 0.380 0.357 Note: Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of ± 0.01 TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 0° 10° 20° 30° IF - Forward Current (mA) 30 25 20 15 10 5 0 0 20 40 60 80 100 120 IV rel - Relative Luminous Intensity 35 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° 0.6 0.4 0.2 0 0.2 0.4 0.6 95 10319 20917 Tamb - Ambient Temperature (°C) Figure 1. Forward Current vs. Ambient Temperature Figure 2. Rel. Luminous Intensity vs. Angular Displacement Document Number 81273 Rev. 1.5, 25-Oct-07 www.vishay.com 3 VLMW33.. Vishay Semiconductors 100 IV rel - Relative Luminous Intensity 90 80 70 60 50 40 30 20 10 0 400 450 500 550 600 650 700 750 800 16196 2.0 I Vrel - Relative Luminous Intensity 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 10 20 16197 30 40 50 60 70 80 90 100 λ - Wavelength (nm) Tamb - Ambient Temperature (°C) Figure 3. Relative Intensity vs. Wavelength Figure 6. Rel. Luminous Intensity vs. Ambient Temperature 100 I F - Forward Current (mA) 3.95 3.90 VF - Forward Voltage (V) 3.85 3.80 3.75 3.70 3.65 3.60 3.55 3.50 3.45 2.5 3.0 3.5 4.0 4.5 5.0 16199 10 1 2.0 19035 0 10 20 30 40 50 60 70 80 90 100 V F - Forward Voltage (V) T amb - Ambient Temperature (°C) Figure 4. Forward Current vs. Forward Voltage Figure 7. Forward Voltage vs. Ambient Temperature f - Chromaticitycoordinante shift (x, y) 10 I Vrel - Relative Luminous Intensity 0.345 white 0.340 X 1 0.335 0.330 Y 0.1 0.325 0.320 0.315 0 10 20 30 40 50 60 IF - Forward Current (mA) 0.01 1 16194 10 I F - Forward Current (mA) 100 16198 Figure 5. Relative Luminous Intensity vs. Forward Current Figure 8. Chromaticity Coordinate Shift vs. Forward Current www.vishay.com 4 Document Number 81273 Rev. 1.5, 25-Oct-07 VLMW33.. Vishay Semiconductors 0.400 8L 0.350 8K 7L 7K 6L Y-par 0.300 5L 5K 6K 0.250 0.200 0.250 0.270 0.290 0.310 0.330 0.350 0.370 19784_3 X-par Figure 9. Coordinates of Colorgroups PACKAGE DIMENSIONS in millimeters Mounting Pad Layout 1.2 area covered with solder resist 2.6 (2.8) 4 1.6 (1.9) 20541 Document Number 81273 Rev. 1.5, 25-Oct-07 4 www.vishay.com 5 VLMW33.. Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 120° 10.0 9.0 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Adhesive Tape Identification Label: Vishay Type Group Tape Code Production Code Quantity Blister Tape 180 178 14.4 max. 94 8665 Figure 11. Reel Dimensions - GS08 Component Cavity 94 8670 TAPING OF VLM.3... REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 3.5 3.1 2.2 2.0 120° 5.75 5.25 3.6 3.4 1.85 1.65 4.0 3.6 8.3 7.7 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 Identification Label: Vishay Type Group Tape Code Production Code Quantity 1.6 1.4 4.1 3.9 2.05 1.95 4.1 3.9 0.25 94 8668 321 329 14.4 max. 18857 Figure 10. Tape Dimensions in mm for PLCC-2 Figure 12. Reel Dimensions - GS18 www.vishay.com 6 Document Number 81273 Rev. 1.5, 25-Oct-07 VLMW33.. Vishay Semiconductors SOLDERING PROFILE IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC Level 2a BAR CODE PRODUCT LABEL EXAMPLE: 300 250 Temperature (°C) 200 max. 30 s 150 max. 120 s 100 50 0 0 19885 255 °C 240 °C 217 °C max. 260 °C 245 °C 106 A H VISHAY max. 100 s 37 max. ramp up 3 °C/s max. ramp down 6 °C/s B 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed C D E F G 20121 Figure 13. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020C) TTW Soldering 300 250 Temperature (°C) 200 150 100 50 0 0 50 235 °C...260 °C first wave ca. 200 K/s 100 °C...130 °C 5s (acc. to CECC00802) 948626-1 Lead Temperature second wave ca. 2 K/s full line: typical dotted line: process limits A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: S1 = code for luminous intensity group 4K = code for color group D) Date code year/week E) Day code (e.g. 1: Monday) F) Batch no. G) Total quantity H) Company code 2 K/s forced cooling 100 Time (s) 150 ca. 5 K/s 200 250 Figure 14. Double Wave Soldering of Opto Devices (all Packages) Document Number 81273 Rev. 1.5, 25-Oct-07 www.vishay.com 7 VLMW33.. Vishay Semiconductors DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. LEVEL This bag contains MOISTURE –SENSITIVE DEVICES CAUTION 2a 1. Shelf life in sealed bag 12 months at