VLMYG33P1Q2-GS08

VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors Power SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement e3 equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020C • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity ratio in one packaging unit IVmax/IVmin ≤ 1.6 • Lead (Pb)-free device • Preconditioning: acc. to JEDEC level 2a • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC • ESD-withstand voltage: up to 2 kV according to JESD22-A114-B APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: indicator and backlighting in telephone and fax • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches and symbols • General use 19225 DESCRIPTION The package of the VLM.G33.. is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 • Product series: power • Angle of half intensity: ± 60° PARTS TABLE PART VLMPG33N1P2-GS08 VLMPG33N1P2-GS18 VLMYG33P1Q2-GS08 VLMYG33P1Q2-GS18 COLOR, LUMINOUS INTENSITY Pure green, IV = (28 to 71) mcd Pure green, IV = (28 to 71) mcd Yellow green, IV = (45 to 112) mcd Yellow green, IV = (45 to 112) mcd TECHNOLOGY AlInGaP on GaAs AlInGaP on GaAs AlInGaP on GaAs AlInGaP on GaAs Document Number 81335 Rev. 1.2, 10-Sep-07 www.vishay.com 1 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS1) VLMPG33../VLMYG33.. PARAMETER Reverse voltage2) DC Forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Thermal resistance junction/ ambient mounted on PC board (pad size > 16 mm2) TEST CONDITION Tamb ≤ 73 °C tp ≤ 10 µs SYMBOL VR IF IFSM PV Tj Tamb Tstg RthJA VALUE 5 50 0.2 130 125 - 40 to + 100 - 40 to + 100 400 UNIT V mA A mW °C °C °C K/W Note: 1) T amb = 25 °C unless otherwise specified 2) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS1) VLMPG33.., PURE GREEN PARAMETER Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Temperature coefficient of VF Temperature coefficient of IV TEST CONDITION IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IR = 10 µA IF = 30 mA IF = 30 mA PART VLMPG33N1P2 SYMBOL IV λd λp ϕ VF VR TCV TCI 5 -4 - 0.4 MIN 28 555 560 565 ± 60 2 2.5 TYP MAX 71 565 UNIT mcd nm nm deg V V mV/K %/K Note: 1) T amb = 25 °C unless otherwise specified OPTICAL AND ELECTRICAL CHARACTERISTICS1) VLMYG33.., YELLOW GREEN PARAMETER Luminous intensity Luminous flux/luminous intensity Dominant wavelength Peak wavelength Spectral bandwidth at 50 % Irel max Angle of half intensity Forward voltage Reverse voltage Temperature coefficient of VF Temperature coefficient of IV Note: 1) TEST CONDITION IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IR = 10 µA IF = 30 mA IF = 30 mA PART VLMYG33P1Q2 SYMBOL IV φV/IV λd λp Δλ ϕ VF VR TCV TCI MIN 45 TYP. 3 MAX 112 577 UNIT mcd mlm/mcd nm nm 566 18 ± 60 1.7 5 -4 - 0.04 2.0 2.5 nm deg V V mV/K %/K Tamb = 25 °C unless otherwise specified www.vishay.com 2 Document Number 81335 Rev. 1.2, 10-Sep-07 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD L M N P Q Note: Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type Numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. LUMINOUS INTENSITY (MCD) OPTIONAL 1 2 1 2 1 2 1 2 1 2 MIN 11.2 14.0 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 MAX 14.0 18.0 22.4 28.0 35.5 45.0 56.0 71.0 90.0 112.0 GROUP 0 1 2 3 4 5 6 7 8 9 566 568 570 572 574 569 571 573 575 577 MIN 555 558 560 562 COLOR CLASSIFICATION DOMINANT WAVELENGTH (NM) PURE GREEN MAX 559 561 563 565 YELLOW GREEN MIN MAX Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. CROSSING TABLE VISHAY VLMPG33N1P2 VLMYG33P1Q2 OSRAM LPT675N1P2 LGT676 TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified Δ VF - Change of Forward Voltage (mV) 100 90 600 500 400 300 200 100 50 mA 30 mA pure green IF - Forward Current (mA) 80 70 60 50 40 30 20 10 0 10 25 50 75 100 125 RthJA = 400 K/W 0 - 100 - 200 - 300 - 50 - 25 0 25 50 75 100 10 mA 16784 Tamb - Ambient Temperature (°C) 18615 Tamb - Ambient Temperature (°C) Figure 1. Forward Current vs. Ambient Temperature Figure 2. Change of Forward Voltage vs. Ambient Temperature Document Number 81335 Rev. 1.2, 10-Sep-07 www.vishay.com 3 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors 0° 10° 20° 30° 100 IVrel - Relative Luminous Intensity 40° 1.0 0.9 0.8 0.7 50° 60° 70° 80° IF - Forward Current (mA) Pure green Yellowgreen 10 1 0.6 95 10319_1 0.4 0.2 0 0.2 0.4 0.6 20392 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 VF - Forward Voltage (V) Figure 3. Rel. Luminous Intensity vs. Angular Displacement Figure 6. Forward Current vs. Forward Voltage IV rel - Relative Luminous Intensity 1.2 10 pure green IVrel - Relative Luminous Intensity 1.0 0.8 0.6 0.4 0.2 0.0 510 530 550 570 590 610 Pure Green Yellowgreen 1 0.1 0.01 1 20393 10 100 18648 - Wavelength (nm) IF - Forward Current ( mA ) Figure 4. Relative Luminous Intensity vs. Wavelength Figure 7. Rel. Luminous Intensity vs. Forward Current IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 1.2 yellow green 1.0 0.8 0.6 0.4 0.2 0.0 520 18647 3.0 pure green 2.5 2.0 1.5 1.0 0.5 0.0 - 50 540 560 580 600 620 - 25 0 25 50 75 100 - Wavelength (nm) 18616 Tamb - Ambient Temperature (°C) Figure 5. Relative Luminous Intensity vs. Wavelength Figure 8. Rel. Luminous Intensity vs. Ambient Temperature www.vishay.com 4 Document Number 81335 Rev. 1.2, 10-Sep-07 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors Δ λ d - Change of Dom. Wavelength (nm) Δ λ d - Change of Dom. Wavelength (nm) 8 pure green 6 4 2 0 -2 -4 -6 -8 - 50 18617 8 yellow green 6 4 2 0 -2 -4 -6 -8 - 50 - 25 0 25 50 75 100 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) 18620 Tamb - Ambient Temperature (°C) Figure 9. Change of Dominant Wavelength vs. Ambient Temperature Figure 11. Change of Dominant Wavelength vs. Ambient Temperature 2.5 IV rel - Relative Luminous Intensity yellow green 2.0 1.5 1.0 0.5 0 - 50 18619 - 25 0 25 50 75 100 Tamb - Ambient Temperature (°C) Figure 10. Rel. Luminous Intensity vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 3.5 ± 0.2 1.75 ± 0.10 technical drawings according to DIN specifications 0.9 Mounting Pad Layout Pin identification 1.2 area covered with solder resist 2.6 (2.8) + 0.15 2.2 C A 2.8 4 1.6 (1.9) ? 2.4 3 + 0.15 Drawing-No.: 6.541-5025.01-4 Issue: 8; 22.11.05 95 11314-1 Document Number 81335 Rev. 1.2, 10-Sep-07 4 www.vishay.com 5 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. Identification Label: Vishay Type Group Tape Code Production Code Quantity REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 120° 10.4 8.4 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 Adhesive Tape Blister Tape 321 329 14.4 max. 18857 Figure 14. Reel Dimensions - GS18 SOLDERING PROFILE Component Cavity 94 8670 IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC Level 2a 300 TAPING OF VLM.3.. 250 Temperature (°C) 3.5 3.1 2.2 2.0 255 °C 240 °C 217 °C max. 30 s max. 260 °C 245 °C 200 150 max. 120 s 100 50 max. ramp up 3 °C/s max. ramp down 6 °C/s max. 100 s 5.75 5.25 3.6 3.4 1.85 1.65 4.0 3.6 8.3 7.7 1.6 1.4 4.1 3.9 2.05 1.95 4.1 3.9 0.25 0 0 50 100 150 Time (s) 200 250 300 19885 94 8668 max. 2 cycles allowed Figure 12. Tape Dimensions in mm for PLCC-2 Figure 15. Vishay Leadfree Reflow Soldering Profile (acc. to J-STD-020C) TTW Soldering 300 250 Temperature (°C) 5s 235 °C...260 °C first wave ca. 200 K/s 100 °C...130 °C 100 50 0 0 50 100 Time (s) 150 200 250 2 K/s forced cooling ca. 5 K/s second wave ca. 2 K/s (acc. to CECC00802) 948626-1 REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 10.0 9.0 Lead Temperature full line: typical dotted line: process limits 120° 200 150 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay Type Group Tape Code Production Code Quantity 180 178 14.4 max. 94 8665 Figure 16. Double Wave Soldering of Opto Devices (all Packages) Figure 13. Reel Dimensions - GS08 www.vishay.com 6 Document Number 81335 Rev. 1.2, 10-Sep-07 VLMPG33N1P2/VLMYG33P1Q2 Vishay Semiconductors BAR CODE PRODUCT LABEL 106 A H VISHAY 37 B C D E F G 20138 A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: N1 = code for luminous intensity group 3 = code for color group D) Date code year/week E) Day code (e.g. 3: Wednesday) F) Batch no. G) Total quantity H) Company code DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminium bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/ - 0 °C and < 5 % RH (dry air/ nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. LEVEL This bag contains MOISTURE –SENSITIVE DEVICES CAUTION 2a 1. Shelf life in sealed bag 12 months at