VO3150A
Vishay Semiconductors
0.5 A Output Current IGBT and MOSFET Driver
FEATURES
• 0.5 A minimum peak output current
NC A C NC
20530_1
1 2 3 4
8 7 6 5
VCC VO VO VEE
• 25 kV/μs minimum common mode rejection (CMR) at VCM = 1500 V • ICC = 2.5 mA maximum supply current • Under voltage hysteresis lock-out (UVLO) with
Shield
• Wide operating VCC range: 15 V to 32 V • 0.4 μs maximum propagation delay • Industrial temperature range: - 40 °C to 110 °C • 0.5 V maximum low level output voltage (VOL) • Compliant to RoHS directive 2002/95/EC
DE
19813
V
DESCRIPTION
The VO3150A consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 800 V/20 A. For IGBTs with higher ratings, the VO3150A can be used to drive a discrete power stage which drives the IGBT gate.
APPLICATIONS
• Isolated IGBT/MOSFET gate driver • AC and brushless DC motor drives • Induction stove top • Industrial inverters • Switch mode power supplies (SMPS) • Uninterruptible power supplies (UPS)
AGENCY APPROVALS
• UL - file no. E52744 system code H, double protection • cUL - file no. E52744, equivalent to CSA bulletin 5A • DIN EN 60747-5-5 (VDE0884) available with option 1
ORDERING INFORMATION
DIP-8 Option 7
V
O
3
1
5
0
A
-
X
0
0
7
T TAPE AND REEL
7.62 mm > 0.7 mm
PART NUMBER
PACKAGE OPTION
PACKAGE DIP-8 SMD-8, option 7
UL, cUL VO3150A VO3150A-X007T
UL, cUL, VDE VO3150A-X017T
TRUTH TABLE
LED Off On On On VCC - VEE “POSITIVE GOING” (TURN ON) 0 V to 32 V 0 V to 11 V 11 V to 13.5 V 13.5 V to 32 V VCC - VEE “NEGATIVE GOING” (TURN OFF) 0 V to 32 V 0 V to 9.5 V 9.5 V to 12 V 12 V to 32 V VO Low Low Transition High
Document Number: 81808 Rev. 1.1, 14-Jan-10
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com 1
VO3150A
Vishay Semiconductors
0.5 A Output Current IGBT and MOSFET Driver
(1)
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Input forward current Peak transient input current Reverse input voltage Output power dissipation OUTPUT High peak output current (2) Low peak output current (2) Supply voltage Output voltage Output power dissipation OPTOCOUPLER Isolation test voltage (between emitter and detector, climate per DIN 500414, part 2, Nov. 74) Storage temperature range Ambient operating temperature range Total power dissipation Lead solder temperature (3)
(Tamb = 25 °C, unless otherwise specified)
TEST CONDITION SYMBOL VALUE UNIT
< 1 μs pulse width, 300 pps
IF IF(TRAN) VR Pdiss IOH(PEAK) IOL(PEAK) (VCC - VEE) VO(PEAK) Pdiss
25 1 5 45
mA A V mW
0.5 0.5 0 to + 35 0 to + VCC 250
A A V V mW
t=1s
VISO TS Tamb Ptot
5300 - 55 to + 125 - 40 to + 110 295 260
VRMS °C °C mW °C
for 10 s, 1.6 mm below seating plane
Tsld
Notes (1) Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Maximum pulse width = 10 μs, maximum duty cycle = 0.2 %. This value is intended to allow for component tolerances for designs with IO peak minimum = 0.5 A. See applications section for additional details on limiting IOH peak. (3) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP).
RECOMMENDED OPERATING CONDITION
PARAMETER Power supply voltage Input LED current (on) Input voltage (off) Operating temperature SYMBOL VCC - VEE IF VF(OFF) Tamb MIN. 15 7 -3 - 40 MAX. 32 16 0.8 + 110 UNIT V mA V °C
www.vishay.com 2
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81808 Rev. 1.1, 14-Jan-10
VO3150A
0.5 A Output Current IGBT and MOSFET Driver
THERMAL CHARACTERISTICS
PARAMETER LED power dissipation Output power dissipation Total power dissipation Maximum LED junction temperature Maximum output die junction temperature Thermal resistance, junction emitter to board Thermal resistance, junction emitter to case Thermal resistance, junction detector to board Thermal resistance, junction detector to case Thermal resistance, junction emitter to junction detector Thermal resistance, case to ambient SYMBOL Pdiss Pdiss Ptot Tjmax. Tjmax. θJEB θJEC θJDB θJDC θJED θCA VALUE 45 250 285 125 125 169 192 82 80 200 2645 UNIT mW mW mW °C °C °C/W °C/W
θDB TJD θDC θDE TC TA
Vishay Semiconductors
θCA Package θEC TJE
°C/W °C/W °C/W
19996
θEB TB θBA
°C/W
TA
Note • The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's Thermal Characteristics of Optocouplers application note.
ELECTRICAL CHARACTERISTICS
PARAMETER High level output current Low level output current High level output voltage Low level output voltage High level supply current Low level supply current Threshold input current low to high Threshold input voltage high to low Input forward voltage Temperature coefficient of forward voltage Input reverse breakdown voltage Input capacitance UVLO threshold UVLO hysteresis
(1)
TEST CONDITION IF = 16 mA, Rg = 10 Ω, Cg = 20 nF, VCC = 15 V, VEE = 0 V IF = 0 mA, Rg = 10 Ω, Cg = 20 nF, VCC = 15 V, VEE = 0 V IO = - 100 mA IO = 100 mA Output open, IF = 7 mA to 16 mA Output open, VF = - 3 V to + 0.8 V IO = 0 mA, VO > 5 V IF = 10 mA IF = 10 mA IR = 10 μA f = 1 MHz, VF = 0 V VO ≥ 5 V IF = 10 mA
SYMBOL IOH (3) IOL (3) VOH (4) VOL ICCH ICCL IFLH VFHL VF ΔVF/ΔTA BVΡ CIN VUVLO+ VUVLOUVLOHYS
MIN. 0.5 0.5 VCC - 4
TYP.
MAX.
UNIT A A
VCC - 2.1 0.2 0.5 2.5 2.5 2.1 5 1.6
V V mA mA mA V V mV/°C V
0.8 1 1.3 - 1.4 5 60 11 9.5 12.6 10.7 1.9 13.5 12
pF V V V
Notes (1) Minimum and maximum values were tested over recommended operating conditions (T amb = - 40 °C to 110 °C, IF(ON) = 7 mA to 16 mA, VF(OFF) = - 3 V to 0.8 V, VCC = 15 V to 32 V, VEE = ground) unless otherwise specified. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. All typical values were measured at Tamb = 25 °C and with VCC - VEE = 32 V. (2) Maximum pulse width = 50 μs, maximum duty cycle = 0.5 %. (3) Maximum pulse width = 10 μs, maximum duty cycle = 0.2 %. This value is intended to allow for component tolerances for designs with IO peak minimum = 0.5 A. (4) In this test V OH is measured with a dc load current. When driving capacitive loads VOH will approach VCC as IOH approaches zero A. Maximum pulse width = 1 ms, maximum duty cycle = 20 %. Document Number: 81808 Rev. 1.1, 14-Jan-10 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3
VO3150A
Vishay Semiconductors
TEST CIRCUITS
0.5 A Output Current IGBT and MOSFET Driver
1
8
0.1 µF
1
+
8
0.1 µF 100 mA
IF = 7 mA to 16 mA
2
7
4V
2
+
VCC = 15 V to 32 V
7
+
VCC = 15 V to 32 V
3
6
IOH
3 4
6
VOL
4
5
5
20973_1
20974_1
Fig. 1 - IOH Test Circuit
Fig. 4 - VOL Test Circuit
1
8
0.1 µF IOL
1 2
VCC = 15 V to 32 V IF
8
0.1 µF
2
7
+
+
7
+
VO > 5 V VCC = 15 V to 32 V
3
6 5
2.5 V
3 4
6 5
4
20975_1
20976_1
Fig. 2 - IOL Test Circuit
Fig. 5 - IFLH Test Circuit
1
8
0.1 µF VOH
1
8
0.1 µF
2
IF = 7 mA to 16 mA
7
2
+
VCC = 15 V to 32 V
7
+ VO > 5 V VCC
IF = 10 mA
3
6
100 mA
3 4
20978
6 5
4
20977_1
5
Fig. 3 - VOH Test Circuit
Fig. 6 - UVLO Test Circuit
SWITCHING CHARACTERISTICS
PARAMETER Propagation delay time to logic low output (1) Propagation delay time to logic high output (1) Pulse width distortion (2) Propagation delay difference between any two parts (3) Rise time Fall time TEST CONDITION Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % Rg = 47 Ω, Cg = 3 nF, f = 10 kHz, duty cycle = 50 % SYMBOL tPHL tPLH PWD PDD (tPHL - tPLH) tr tf - 0.35 0.1 0.1 MIN. 0.1 0.1 TYP. MAX. 0.4 0.4 0.2 0.35 UNIT μs μs μs μs μs μs
www.vishay.com 4
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81808 Rev. 1.1, 14-Jan-10
VO3150A
0.5 A Output Current IGBT and MOSFET Driver
SWITCHING CHARACTERISTICS
PARAMETER UVLO turn on delay UVLO turn off delay TEST CONDITION VO > 5 V, IF = 10 mA VO > 5 V, IF = 10 mA SYMBOL TUVLO-ON TUVLO-OFF MIN. TYP. 0.8 0.6 MAX. UNIT μs μs
Vishay Semiconductors
Notes (1) This load condition approximates the gate load of a 1200 V/25 A IGBT. (2) Pulse width distortion (PWD) is defined as |t PHL - tPLH| for any given device. (3) The difference between t PHL and tPLH between any two VO3150A parts under the same test condition.
1
I F = 7 mA to 16 mA
8
0.1 µF IF
+
10 kHz 50 % duty cycle
500 Ω
2
7
+
VO
VCC = 15 V to 32 V
tr
tf 90 % 50 %
3
6
47 Ω 3 nF
OUT
10 %
4
20979_1
5
t PLH t PHL
Fig. 7 - tPLH, tPHL, tr and tf Test Circuit and Waveforms
COMMON MODE TRANSIENT IMMUNITY
PARAMETER TEST CONDITION SYMBOL |CMH| |CML| MIN. 25 25 TYP. 35 35 MAX. UNIT kV/μs kV/μs Common mode transient immunity TA = 25 °C, IF = 10 mA to 16 mA, at logic high output (1)(2) VCM = 1500 V, VCC = 32 V Common mode transient immunity at logic low output (1)(3) TA = 25 °C, VCM = 1500 V, VCC = 32 V, VF = 0 V
Notes (1) Pins 1 and 4 need to be connected to LED common. (2) Common mode transient immunity in the high state is the maximum tolerable |dV CM/dt| of the common mode pulse, VCM, to assure that the output will remain in the high state (i.e., VO > 15 V). (3) Common mode transient immunity in a low state is the maximum tolerable |dV CM/dt| of the common mode pulse, VCM, to assure that the output will remain in a low state (i.e., VO < 1 V).
1
IF
8 0.1 µF
dV dt
=
VCM Dt
A R 5V
+
2
7
VO
0V
+
VCC = 32 V Dt VOH
3
6
VO Switch at A: IF = 10 mA
4
5
VO Switch at B: IF = 0 mA VOL
20980-1
VCM = 1500 V
+
Fig. 8 - CMR Test Circuit and Waveforms
Document Number: 81808 Rev. 1.1, 14-Jan-10
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com 5
VO3150A
Vishay Semiconductors
0.5 A Output Current IGBT and MOSFET Driver
SAFETY AND INSULATION RATINGS
PARAMETER Climatic classification (according to IEC 68 part 1) Comparative tracking index VIOTM VIORM PSO ISI TSI Creepage distance Clearance distance Creepage distance Clearance distance Standard DIP-8 Standard DIP-8 400 mil DIP-8 400 mil DIP-8 7 7 8 8 CTI 175 8000 890 500 300 175 TEST CONDITION SYMBOL MIN. TYP. 40/110/21 399 V V mW mA °C mm mm mm mm MAX. UNIT
Note • As per IEC 60747-5-5, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
0.0
0.35 IF = 16 mA IOUT = - 100 mA VCC = 32 V VEE = 0 V
VOL - Output Low Voltage (V)
VOH - VCC - High Output Voltage Drop (V)
- 0.5 - 1.0 - 1.5 - 2.0 - 2.5
0.30 0.25 0.20 0.15 0.10 0.05 0.00 - 40 - 20 VF(OFF) = 0.8 V IOUT = 100 mA VCC = 32 V VEE = 0 V 0 20 40 60 80 100 120
- 3.0 - 40 - 20
21705-1
0
20
40
60
80 100 120
Temperature (°C)
21707-1
Temperature (°C)
Fig. 9 - High Output Voltage Drop vs. Temperature
Fig. 11 - Output Low Voltage vs. Temperature
2.5
2.5
IOH - High Output Current (A)
2.0 1.5 1.0 0.5
IOL - Output Low Current (A)
IF = 16 mA Rg = 10 Ω, Cg = 20 nF VCC = 15 V VEE = 0 V
2.0
IF = 0 mA Rg = 10 Ω, Cg = 20 nF VCC = 15 V VEE = 0 V
1.5 1.0
0.5 0.0 - 40 - 20
0.0 - 40 - 20
21759
0
20
40
60
80 100 120
0
20
40
60
80
100
Temperature (°C)
21760
Temperature (°C)
Fig. 10 - High Output Current vs. Temperature
Fig. 12 - Output Low Current vs. Temperature
www.vishay.com 6
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81808 Rev. 1.1, 14-Jan-10
VO3150A
0.5 A Output Current IGBT and MOSFET Driver
Vishay Semiconductors
2
2.5
VOL - Output Low Voltage (V)
ICC - Supply Current (mA)
1.5
IF = 0 mA VCC = 15 V VEE = 0 V 110 °C
25 °C
2.0 1.5 1.0
IF = 10 mA for ICCH IF = 0 mA for ICCL TA = 25 °C VEE = 0 V ICCH
1 - 40 °C 0.5
ICCL 0.5 0.0
0 0.0
21761
0.2
0.4
0.6
0.8
21711
15
20
25
30
35
IOL - Output Low Current (A)
VCC - Supply Voltage (V)
Fig. 16 - Supply Current vs. Supply Voltage
Fig. 13 - Output Low Voltage vs. Output Low Current
(VOH - VCC) Output High Voltage Drop (V)
-1
5.0
IFLH - Low to High Current Threshold (mA)
- 1.5
IF = 16 mA VCC = 15 V VEE = 0 V
4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 - 40 - 20
21712-1
VCC = 32 V VEE = 0 V Output = open
-2 - 40 °C - 2.5 25 °C 110 °C -3 0 0.2 0.4 0.6 0.8
0
20
40
60
80 100 120
21762
IOH - Output High Current (A)
Temperature (°C)
Fig. 14 - Output High Voltage Dropvs. Output High Current
Fig. 17 - Low to High Current Threshold vs. Temperature
2.5
35 TA = 25 °C
ICC - Supply Current (mA)
2.0 ICCH 1.5 1.0 0.5 IF = 16 mA for ICCH IF = 0 mA for ICCL VCC = 32 V VEE = 0 V 0 20 40 60 80 100 120 ICCL
VO - Output Voltage (V)
30 25 20 15 10 5 0 0 1 2 3 4 5
0.0 - 40 - 20
21710-1
Temperature (°C)
Fig. 15 - Supply Current vs. Temperature
21752
IF - Forward LED Current (mA)
Fig. 18 - Transfer Characteristics
Document Number: 81808 Rev. 1.1, 14-Jan-10
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com 7
VO3150A
Vishay Semiconductors
0.5 A Output Current IGBT and MOSFET Driver
500
500
tp - Propagation Delay (ns)
tp - Propagation Delay (ns)
400
IF = 10 mA, TA = 25 °C Rg = 47 Ω, Cg = 3 nF Duty cycle = 50 % f = 10 kHz
400 300 200 100 0
VCC = 30 V, VEE = 0 V IF = 10 mA, TA = 25 °C Cg = 3 nF Duty cycle = 50 % f = 10 kHz
300 tPHL 200 tPLH 100 15 20 25 30 35
tPLH tPHL
0
21739
10
20
30
40
50
21736
VCC - Supply Voltage (V)
Rg - Series Load Resistance (Ω)
Fig. 19 - Propagation Delay vs. Supply Voltage
Fig. 22 - Propagation Delay vs. Series Load Resistance
500
500
tp - Propagation Delay (ns)
400 300 200 100
tp - Propagation Delay (ns)
VCC = 32 V, VEE = 0 V IF = 10 mA Rg = 47 Ω, Cg = 3 nF Duty cycle = 50 % f = 10 kHz
400 300 200
tPHL
VCC = 30 V, VEE = 0 V IF = 10 mA, TA = 25 °C Rg = 47 Ω Duty cycle = 50 % f = 10 kHz tPLH
tPLH
tPHL 100 0
0 - 40
21737
- 15
10
35
60
85
110
21740
0
20
40
60
80
100
TA - Temperature (°C)
Cg - Series Load Capacitance (nF)
Fig. 20 - Propagation Delay vs. Temperature
Fig. 23 - Propagation Delay vs. Series Load Capacitance
500
tp - Propagation Delay (ns)
400 300 200
VCC = 30 V, VEE = 0 V IF = 10 mA, TA = 25 °C Rg = 47 Ω, Cg = 3 nF Duty cycle = 50 % f = 10 kHz tPHL tPLH
100 0 6 8 10 12 14 16
21738
IF - Forward LED Current (mA)
Fig. 21 - Propagation Delay vs. Forward LED Current
www.vishay.com 8
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 81808 Rev. 1.1, 14-Jan-10
VO3150A
0.5 A Output Current IGBT and MOSFET Driver
PACKAGE DIMENSIONS in millimeters
Pin one ID 4 6.48 6.81 5 6 7 8 ISO method A 3 2 1
Vishay Semiconductors
9.63 9.91 0.76 1.14 4° typ. 3.30 3.81 1.27 0.46 0.56
i178006
7.62 typ. 0.79
10° 0.51 0.89 2.54 typ. 3° to 9° 0.2 0.3
2.79 3.30
5.84 6.35
Option 7
7.62 typ.
0.7
4.6 4.1 8 min. 8.4 min. 10.3 max.
18450-4
PACKAGE MARKING
VO3150A V YWW H 68
21764-43
Note • VDE logo is only marked on option 1 parts. Option information is not marked on the part.
Document Number: 81808 Rev. 1.1, 14-Jan-10
For technical questions, contact: optocoupleranswers@vishay.com
www.vishay.com 9
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1