VRC330K470MTF

VR Vishay Thin Film Molded, SOT-23 Resistor/Capacitor Network FEATURES • Lead (Pb)-free standard • Resistor and capacitor integrated into a Thin Film Network • Filters at the source of emissions Vishay’s R/C Network, packaged in the standard SOT-23, can be strategically placed on your PC board to do localized filtering. The R/C Network can be located at the point of emission before transients are carried through the design. The sophisticated process of integrating the Resistor and Capacitor on a single substrate provides you with higher performance and more consistent results over discrete components. A real estate savings will also be gained. Applications include EMI/RFI suppression and AC termination. These networks, in the SOT-23, along with Vishay’s high component count R Networks and R/C Networks in a variety of standard IC packages, provides you with the exact solution for your redesign or new design. Visit our website for the total picture on available R Networks and R/C Networks from our guaranteed stock program. • More consistent discretes performance characteristics than RoHS COMPLIANT TYPICAL PERFORMANCE TCR RESISTOR 200 TCC CAPACITOR 200 TOLERANCE 10 % TOLERANCE 20 % SCHEMATIC 3 C C R 1 2 R 1 2 C R R 1 2 R 3 3 C VR TOOLED VALUES (1) SCHEMATIC D C A R (Ω) 33 47 100 C (pF) 47 47 80 D Tapped Filter C AC Termination A T Filter Note (1) Consult Application Engineering for Custom Values RC NETWORKS STANDARD ELECTRICAL SPECIFICATIONS TEST Resistance Range TCR: Absolute Absolute Tolerance: Absolute Power Rating: Package ± 20 % Standard (C) 1 W at + 70 °C 100 mW 10 - 80 25 - 45 V 0 to + 70 °C - 55 °C to + 125 °C SPECIFICATIONS 10 Ω to 500 Ω ± 200 ppm/°C ± 10 % Standard (R) at 1 MHz and VRMS over + 10 °C to + 70 °C 0 °C to + 70 °C CONDITIONS Power Rating/Resistor Capacitance Range (pF) Breakdown Voltage Operating Temperature Range Storage Temperature Range Document Number: 60088 Revision: 01-Jul-08 For technical questions, contact: thin-film@vishay.com www.vishay.com 121 VR Vishay Thin Film Molded, SOT-23 Resistor/Capacitor Network DIMENSIONS AND IMPRINTING in inches and millimeters JEDEC STANDARD TO-236 DIMENSION A 3 W B A L T INCHES MIN. 0.027 0.001 0.105 0.071 0.015 0.083 0.047 0.050 0.003 0.017 0 MAX. 0.040 0.004 0.120 0.079 0.021 1.03 0.055 0.157 0.008 0.022 8° MILLIMETERS MIN. 0.70 0.02 2.67 1.80 0.38 2.10 MAX. 1.02 0.15 3.04 2.00 0.54 2.64 1.40 0.40 0.15 0.55 8° A1 B S W L J Ø H K 1 S A1 2 H T J K Ø 1.20 0.13 0.089 0.44 0 IMPRINTING SCHEMATIC VRA VRC VRD AA AC AD MECHANICAL SPECIFICATIONS Resistive Element Capacitive Element Substrate Material Body Tantalum Nitride Thin Film Silicon Molded Epoxy Copper Alloy 100 % Sn Matte 0.0005 Inches Permanency testing per MIL-STD-202, Method 215 DERATING CURVE Percent of Rated Power 100 80 60 40 20 0 - 50 0 25 70 125 150 Ambient Temperature °C RC NETWORKS Terminals Plating Lead Coplanarity Marking Resistance to Solvents PACKAGING INFORMATION MODEL VR LEADS 3 TAPE AND REEL 3000 www.vishay.com 122 For technical questions, contact: thin-film@vishay.com Document Number: 60088 Revision: 01-Jul-08 VR Molded, SOT-23 Resistor/Capacitor Network Vishay Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VRD330K470MTF (preferred part number format) V R D 3 3 0 K 4 7 0 M T F GLOBAL MODEL VR (Lead (Pb)-free) (e1) SCHEMATICS D = Tapped Filter C = AC Termination A = T Filter RESISTANCE AND TOLERANCE/ CAPACITANCE AND TOLERANCE xxxK/yyyM First 2 digits are significant figures. Last digit specifies number of zeroes to follow e.g. 330K/470M = 330 W, 10 % 47 pF 20 % K = 10 % M = 20 % PACKAGING UF = TUBED TAPE AND REEL TF = Full Reels Historical Part Number example: VRD330K479MT/R (will continue to be accepted) VR MODEL D SCHEMATIC 330K RESISTANCE 470M TOLERANCE T/R PACKAGING RC NETWORKS www.vishay.com 123 Document Number: 60088 Revision: 01-Jul-08 For technical questions, contact: thin-film@vishay.com Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1