VSKC56-06

VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A FEATURES • High voltage • Industrial standard package • Low thermal resistance • UL approved file E78996 • Compliant to RoHS Directive 2002/95/EC • Designed and qualified for industrial level ADD-A-PAK BENEFITS • Excellent thermal performances obtained by the usage of exposed direct bonded copper substrate 60 A PRODUCT SUMMARY IF(AV) Type Modules - Diode, High Voltage • Up to 1600 V • High surge capability MECHANICAL DESCRIPTION The ADD-A-PAK generation VII, new generation of ADD-A-PAK module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplified internal structure with minimized number of interfaces. • Easy mounting on heatsink ELECTRICAL DESCRIPTION These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) IF(RMS) IFSM I2t I2t VRRM TJ TStg Range 50 Hz 60 Hz 50 Hz 60 Hz CHARACTERISTICS 114 °C VALUES 60 94 1300 1360 8.44 7.68 84.5 400 to 1600 - 40 to 150 kA2s kA2s V °C A UNITS Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series Vishay Semiconductors ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 04 06 08 VSK.56 10 12 14 16 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 400 600 800 1000 1200 1400 1600 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 500 700 900 1100 1300 1500 1700 10 IRRM MAXIMUM AT TJ = 150 °C mA ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A FORWARD CONDUCTION PARAMETER Maximum average forward current at case temperature Maximum RMS forward current SYMBOL IF(AV) IF(RMS) TEST CONDITIONS 180° conduction, half sine wave DC at 90 °C case temperature t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I 2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level value of forward slope resistance Maximum forward voltage drop I2t VF(TO)1 VF(TO)2 rf1 rf2 VFM No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 60 114 94 1300 1360 1090 Sinusoidal half wave, intitial TJ = TJ maximum 1140 8.44 7.68 5.97 5.43 84.5 0.74 0.86 3.94 m (I >  x IF(AV)), TJ = TJ maximum IFM =  x IF(AV), TJ = 25 °C, tp = 400 μs square wave 3.43 1.6 V kA2s V kA2s A UNITS A °C t = 0.1 ms to 10 ms, no voltage reapplied (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum (I >  x IF(AV)), TJ = TJ maximum (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum BLOCKING PARAMETER Maximum peak reverse leakage current Maximum RMS insulation voltage SYMBOL IRRM VINS TJ = 150 °C 50 Hz TEST CONDITIONS VALUES 10 3000 (1 min) 3600 (1 s) UNITS mA V www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Junction and storage temperature range Maximum internal thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink per module to heatsink Mounting torque ± 10 % busbar Approximate weight Case style JEDEC SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface flat, smooth and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. TEST CONDITIONS VALUES - 40 to 150 0.33 °C/W 0.1 4 Nm 3 75 2.7 g oz. UNITS °C Vishay Semiconductors ADD-A-PAK Gen. VII (TO-240AA) R CONDUCTION PER JUNCTION DEVICES VSK.56 SINE HALF WAVE CONDUCTION 180° 0.115 120° 0.136 90° 0.173 60° 0.236 30° 0.346 180° 0.09 RECTANGULAR WAVE CONDUCTION 120° 0.145 90° 0.185 60° 0.243 30° 0.349 UNITS °C/W Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: indmodules@vishay.com www.vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series Vishay Semiconductors 150 RthJC (DC) = 0.33°C/W ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A Maximum average forward power loss (W) Maximum allowable case temperature (°C) 120 100 80 60 40 20 Per leg, Tj = 150°C 140 180° 120° 90° 60° 30° 130 DC RMS limit 120 180° 120° 90° 60° 30° 110 100 0 10 20 30 40 50 60 70 Average forward current (A) 0 0 20 40 60 80 100 Average forward current (A) Fig. 1 - Current Ratings Characteristics Fig. 4 - Foward Power Loss Characteristics Maximum allowable case temperature (°C) Peak half sine wave forward current (A) 150 RthJC (DC) = 0.33°C/W 1200 At any rated load condition and with rated Vrrm applied following surge Initial Tj = Tj max @ 60 Hz 0.0083 s @ 50 Hz 0.0100s 140 1000 130 800 120 180° 120° 90° 60° 30° 600 110 400 Per leg 100 0 20 40 60 80 100 Average forward current (A) 200 1 10 100 Number of equal amplitude half cycle current pulses (N) Fig. 2 - Current Ratings Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Maximum average forward power loss (W) 90 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 Average forward current (A) Peak half sine wave forward current (A) 180° 120° 90° 60° 30° 1400 1200 1000 800 600 400 200 0.01 Maximum Non-repetitive Surge Current Versus Pulse Train Duration. Initial Tj = 150°C No Voltage Reapplied Rated Vrrm reapplied RMS limit Per leg Per leg, Tj = 150°C 0.1 Pulse train duration (s) 1 Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current www.vishay.com 4 For technical questions, contact: indmodules@vishay.com Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A 120 Maximum total forward power loss (W) Vishay Semiconductors 0 0 180° (Sine) RthSA = 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 2 °C/W 3 °C/W 7 °C/W 100 80 60 40 20 0 0 20 40 60 80 Total RMS output current (A) 0 DC 0 0 VSK.56 Series 0 Per leg, Tj = 150°C 0 100 20 0 40 60 80 100 120 140 160 Maximum allowable ambient temperature (°C) Fig. 7 - Forward Power Loss Characteristics 500 Maximum total power loss (W) 180° (sine) 180° (rect) RthSA = 0.1 °C/W 0.2 °C/W 0.3 °C/W 0.5 °C/W 1 °C/W 400 300 200 100 2 x VSK.56 Series single phase bridge connected Tj = 150°C 0 0 20 40 60 80 100 120 140 160 20 0 40 60 80 100 120 140 160 Total output current (A) Maximum allowable ambient temperature (°C) Fig. 8 - Forward Power Loss Characteristics 500 Maximum total power loss (W) 400 120° (rect) 300 RthSA = 0.3°C/W 0.4 °C/W 0.5 °C/W 0.7 °C/W 1 °C/W 1.5 °C/W 3 °C/W 200 100 3 x VSK.56 Series three phase bridge connected Tj = 150°C 0 0 20 40 60 80 100 120 140 160 20 0 40 60 80 100 120 140 160 Total output current (A) Maximum allowable ambient temperature (°C) Fig. 9 - Forward Power Loss Characteristics Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: indmodules@vishay.com www.vishay.com 5 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series Vishay Semiconductors ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A 1000 Instantaneous forward current (A) Per leg 100 10 Tj = 150°C Tj = 25°C 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Instantaneous forward voltage (V) Fig. 10 - Forward Voltage Characteristics Transient thermal impedance Z thJC ( °C/W) 1 Steady state value RthJC = 0.33 °C/W (DC operation) 0.1 Per leg 0.01 0.001 0.01 0.1 Square wave pulse duration (s) 1 10 Fig. 11 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code VSK 1 1 2 3 4 - D 2 56 3 / 16 4 Module type Circuit configuration (see Circuit Configuration table) Current code (60 A) Voltage code (see Voltage Ratings table) Note • To order the optional hardware go to www.vishay.com/doc?95172 www.vishay.com 6 For technical questions, contact: indmodules@vishay.com Document Number: 94625 Revision: 09-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSKD56.., VSKE56.., VSKJ56.., VSKC56.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 60 A CIRCUIT CONFIGURATION CIRCUIT DESCRIPTION CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING Vishay Semiconductors VSKD... ~ (1) + (2) 2 3 (3) Two diodes doubler circuit D 1 VSKC... + (1) (2) 2 3 (3) Two diodes common cathodes C 1 VSKJ... (1) + (2) 2 3 + (3) Two diodes common anodes J 1 VSKE... + (2) (3) Single diode E 2 3 1 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95369 Document Number: 94625 Revision: 09-Mar-11 For technical questions, contact: indmodules@vishay.com www.vishay.com 7 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors ADD-A-PAK Generation VII - Diode DIMENSIONS in millimeters (inches) Viti M5 x 0.8 Screws M5 x 0.8 18 (0.7) REF. 6.7 ± 0.3 (0.26 ± 0.012) 30 ± 0.5 (1.18 ± 0.020) 35 REF. 29 ± 0.5 (1 ± 0.020) 80 ± 0.3 (3.15 ± 0.012) 22.6 ± 0.2 (0.89 ± 0.008) 2 3 76 6.3 ± 0.2 (0.248 ± 0.008) 15 ± 0.5 (0.59 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 20 ± 0.5 (0.79 ± 0.020) 92 ± 0.75 (3.6 ± 0.030) 1 45 24 ± 0.5 (1 ± 0.020) Document Number: 95369 Revision: 11-Nov-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1