VSKDU162/12PbF
Vishay High Power Products
HEXFRED® Ultrafast Diodes, 100 A (New INT-A-PAK Power Modules)
FEATURES
• Electrically isolated: DBC base plate • Standard JEDEC package • Simplified mechanical designs, rapid assembly • High surge capability • Large creepage distances • UL approved file E78996 • Case style New INT-A-PAK
New INT-A-PAK
• Compliant to RoHS directive 2002/95/EC • Designed and qualified for industrial level
1200 V 2.5 V 150 ns 110 A at 100 °C
PRODUCT SUMMARY
VR VF (typical) trr (typical) IF(DC) at TC
ABSOLUTE MAXIMUM RATINGS
PARAMETER Cathode to anode voltage Continuous forward current Single pulse forward current Maximum power dissipation RMS isolation voltage Operating junction and storage temperature range SYMBOL VR IF IFSM PD VISOL TJ, TStg TC = 25 °C TC = 100 °C Limited by junction temperature TC = 25 °C TC = 100 °C 50 Hz, circuit to base, all terminal shorted, t = 1 s TEST CONDITIONS VALUES 1200 205 110 800 695 280 3500 - 40 to + 150 W V °C A UNITS V
ELECTRICAL SPECIFICATIONS PER LEG (TJ = 25 °C unless otherwise specified)
PARAMETER Cathode to anode breakdown voltage Maximum forward voltage Maximum reverse leakage current SYMBOL VBR VFM IRM IR = 100 μA IF = 100 A IF = 160 A TJ = 150 °C, VR = 1200 V TEST CONDITIONS MIN. 1200 TYP. 2.5 2.9 18 MAX. 3.2 3.9 30 mA V UNITS
Document Number: 94512 Revision: 04-May-10
For technical questions, contact: indmodules@vishay.com
www.vishay.com 1
VSKDU162/12PbF
Vishay High Power Products HEXFRED® Ultrafast Diodes, 100 A
(New INT-A-PAK Power Modules)
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER Reverse recovery time Reverse recovery current Reverse recovery charge Peak rate of recovery current SYMBOL trr IRRM Qrr dI(rec)M/dt TEST CONDITIONS TJ = 25 °C TJ = 25 °C TJ = 25 °C TJ = 25 °C IF = 160 A dIF/dt = 200 A/μs VR = 200 V MIN. TYP. 150 20 2000 MAX. 200 22 2400 300 UNITS ns A nC A/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER Junction operating and storage temperature range Maximum internal thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink per module to heatsink Mounting torque ± 10 % busbar Approximate weight Case style SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface flat, smooth and greased A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. TEST CONDITIONS VALUES - 40 to 150 0.18 °C/W 0.05 4 Nm 6 200 7.1 g oz. UNITS °C
New INT-A-PAK
www.vishay.com 2
For technical questions, contact: indmodules@vishay.com
Document Number: 94512 Revision: 04-May-10
VSKDU162/12PbF
HEXFRED® Ultrafast Diodes, 100 A Vishay High Power Products (New INT-A-PAK Power Modules)
100
1000
Reverse Current - I R (mA)
T J = 150˚C
10 1 0.1 0.01 0.001 200
25˚C
Instantaneous Forward Current - I F (A)
100
400
600
800
1000
1200
Reverse Voltage - V R (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
160
10
Allowable Case Temperature (°C)
Tj = 150˚C Tj = 25˚C
140 120 100 80 60 40 20 0 0 40 80 120 160 200
Average Forward Current - I F(AV) (A)
DC
Square wave (D = 0.50)
1 0 1 2 3 4 5 6 7 8
Forward Voltage Drop - V FM (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 3 - Maximum Allowable Case Temperature vs. Average Forward Current
1
(°C/W)
D = 0.75 D = 0.50 D = 0.33 D = 0.25 0.1 D = 0.20
PDM
Thermal Impedance - Z
thJC
0.01
t1 t2
0.001
Single Pulse (Thermal Resistance)
Notes: 1. Duty factor D = t / t 2. Peak Tj = Pdm x ZthJC + Tc
0.0001 0.00001
0.0001
0.001 0.01 0.1 t 1 , Rectangular Pulse Duration (Seconds)
1
10
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94512 Revision: 04-May-10
For technical questions, contact: indmodules@vishay.com
www.vishay.com 3
VSKDU162/12PbF
Vishay High Power Products HEXFRED® Ultrafast Diodes, 100 A
(New INT-A-PAK Power Modules)
10000
900
Average Power Loss (Watts)
Vr = 200V
D = 0.20 D = 0.25 D = 0.33 D = 0.50
800 700 600 500 400 300 200 100 0 0
RMS Limit
Q RR (nC)
D = 0.75
1000
If = 160A, Tj = 25˚C
DC
50
100
150
200
250
100 100
di f/ dt - (A/µs)
Average Forward Current - I F(AV) (A)
1000
Fig. 5 - Forward Power Loss Characteristics
Fig. 7 - Typical Reverse Recovery Charge vs. dIF/dt (Per Leg)
1000
Vr = 200V
100
Vr = 200V
t rr (ns)
If = 160A, Tj = 25˚C
I
RR
(A)
If = 160A, Tj = 25˚C
100 100
dif/ dt - (A/µs)
1000
10 100
dif/ dt - (A/µs)
1000
Fig. 6 - Typical Reverse Recovery Time vs. dIF/dt (Per Leg)
Fig. 8 - Typical Reverse Recovery Current vs. dIF/dt (Per Leg)
www.vishay.com 4
For technical questions, contact: indmodules@vishay.com
Document Number: 94512 Revision: 04-May-10
VSKDU162/12PbF
HEXFRED® Ultrafast Diodes, 100 A Vishay High Power Products (New INT-A-PAK Power Modules)
ORDERING INFORMATION TABLE
Device code
VS
1 1 2 3 4 5 6 -
K
2
DU
3
162
4
/
12
5
PbF
6
Vishay HPP K = New INT-A-PAK module DU = HEXFRED® ultrafast diode Current rating Voltage rating (12 = 1200 V) PbF = Lead (Pb)-free
CIRCUIT CONFIGURATION
(1) ~
+ (2)
(3)
LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95254
Document Number: 94512 Revision: 04-May-10
For technical questions, contact: indmodules@vishay.com
www.vishay.com 5
Outline Dimensions
Vishay Semiconductors
INT-A-PAK DBC
DIMENSIONS in millimeters (inches)
30 (1.18)
Ø 6.5 (Ø 0.25) 80 (3.15)
17 (0.67)
23 (0.91)
23 (0.91)
35 (1.38)
(0.57)
14.5
66 (2.60) 3 screws M6 x 10 94 (3.70)
5
4
1
2
3
7
6
28 (1.10)
9 (0.33)
37 (1.44)
Document Number: 95254 Revision: 11-Dec-07
For technical questions, contact: indmodules@vishay.com
www.vishay.com 1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
