VSK.500-..PbF Series
Vishay High Power Products
Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAKTM Power Modules), 500 A
FEATURES
• High current capability • High surge capability • Industrial standard package
RoHS
COMPLIANT
• 3000 VRMS isolating voltage with non-toxic substrate • Lead (Pb)-free • Designed and qualified for industrial level
SUPER MAGN-A-PAKTM
TYPICAL APPLICATIONS
• Motor starters
PRODUCT SUMMARY
IT(AV) or IF(AV) 500 A
• DC motor controls - AC motor controls • Uninterruptable power supplies
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL IT(AV) or IF(AV) CHARACTERISTICS VALUES 500 TC 82 785 TC 50 Hz 60 Hz 50 Hz 60 Hz 82 17.8 18.7 1591 1452 15 910 800 to 1600 Range - 40 to 150 - 40 to 130 UNITS A °C A
IT(RMS) ITSM or IFSM I2 t I2 √ t VDRM/VRRM TStg TJ
°C
kA
kA2s kA2√s V °C
ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS
TYPE NUMBER VOLTAGE CODE 08 VSK.500 12 14 16 VRRM/VDRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 800 1200 1400 1600 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 900 1300 1500 1700 100 IRRM/IDRM MAXIMUM AT TJ = TJ MAXIMUM mA
Document Number: 94420 Revision: 20-Mar-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com 1
VSK.500-..PbF Series
Vishay High Power Products
Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAKTM Power Modules), 500 A
ON-STATE CONDUCTION
PARAMETER Maximum average on-state current at case temperature Maximum RMS on-state current SYMBOL IT(AV), IF(AV) IT(RMS) TEST CONDITIONS 180° conduction, half sine wave 180° conduction, half sine wave at TC = 82 °C t = 10 ms Maximum peak, one-cycle, non-repetitive on-state surge current ITSM, IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t for fusing Low level value or threshold voltage High level value of threshold voltage Low level value on-state slope resistance High level value on-state slope resistance Maximum on-state or forward voltage drop Maximum holding current Maximum latching current I2√t VT(TO)1 VT(TO)2 rt1 rt2 VTM VFM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied Sinusoidal half wave, initial TJ = TJ maximum VALUES 500 82 785 17.8 18.7 15.0 15.7 1591 1452 1125 1027 15 910 0.85 0.93 0.36 0.32 1.50 500 1000 kA2√s V mΩ V mA kA2s kA UNITS A °C A
t = 0.1 to 10 ms, no voltage reapplied (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum (16.7 % x π x IT(AV) < I < π x IT(AV)), TJ = TJ maximum (I > π x IT(AV)), TJ = TJ maximum Ipk = 1500 A, TJ = 25 °C, tp = 10 ms sine pulse TJ = 25 °C, anode supply 12 V resistive load
SWITCHING
PARAMETER Maximum rate of rise of turned-on current Typical delay time Typical turn-off time SYMBOL dI/dt td tq TEST CONDITIONS TJ = TJ maximum, ITM = 400 A, VDRM applied Gate current 1 A, dIg/dt = 1 A/µs Vd = 0.67 % VDRM, TJ = 25 °C ITM = 750 A; TJ = TJ maximum, dI/dt = - 60 A/µs, VR = 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω VALUES 1000 2.0 µs 200 UNITS A/µs
BLOCKING
PARAMETER Maximum critical rate of rise of off-state voltage RMS insulation voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt VINS IRRM, IDRM TEST CONDITIONS TJ = 130 °C, linear to VD = 80 % VDRM t=1s TJ = TJ maximum, rated VDRM/VRRM applied VALUES 1000 3000 100 UNITS V/µs V mA
www.vishay.com 2
For technical questions, contact: ind-modules@vishay.com
Document Number: 94420 Revision: 20-Mar-08
VSK.500-..PbF Series
Thyristor/Diode and Thyristor/Thyristor Vishay High Power Products TM Power Modules), 500 A (SUPER MAGN-A-PAK
TRIGGERING
PARAMETER Maximum peak gate power Maximum peak average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage Maximum DC gate current required to trigger DC gate voltage required to trigger DC gate current not to trigger DC gate voltage not to trigger SYMBOL PGM PG(AV) +IGM +VGM -VGM IGT VGT IGD VGD TJ = 25 °C, Vak 12 V TJ = TJ maximum TJ = TJ maximum, tp ≤ 5 ms TEST CONDITIONS TJ = TJ maximum, tp ≤ 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 VALUES 10 2.0 3.0 20 5.0 200 3.0 10 0.25 UNITS W A V mA V mA V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to case per junction Maximum thermal resistance, case to heatsink SMAP to heatsink Mounting torque ± 10 % busbar to SMAP Approximate weight Case style See dimensions - link at the end of datasheet SYMBOL TJ TStg RthJC RthC-hs A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. DC operation TEST CONDITIONS VALUES - 40 to 130 - 40 to 150 0.065 K/W 0.02 6-8 Nm 12-15 1500 g UNITS °C
SUPER MAGN-A-PAK
ΔRthJC CONDUCTION
CONDUCTION ANGLE 180° 120° 90° 60° 30° SINUSOIDAL CONDUCTION 0.009 0.011 0.014 0.021 0.037 RECTANGULAR CONDUCTION 0.006 0.011 0.015 0.022 0.038 TJ = TJ maximum K/W TEST CONDITIONS UNITS
Note • Table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
Document Number: 94420 Revision: 20-Mar-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com 3
VSK.500-..PbF Series
Vishay High Power Products
Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAKTM Power Modules), 500 A
Maximum Average On-state Power Loss (W)
1000 900 800 700 600 500 400 RMS Limit 300 200 100 0 0 100 200 300 400 500 600 700 800 Average On-state Current (A)
Conduction Period
Maximum Allowable Case T emperature (°C)
130 120 110 100 90 30° 80 70 60 0 100 200 300 400 500 600 Average On-state Current (A) 60° 90° 120° 180°
Conduc tion Angle
VSK.500.. S eries R thJC (DC) = 0.065 K/ W
DC 180° 120° 90° 60° 30°
VSK.500.. S eries Per Junc tion TJ = 130°C
Fig. 1 - Current Ratings Characteristics
Fig. 4 - On-State Power Loss Characteristics
Maximum Allowable Case T emperature (°C)
Peak Half S Wave On-state Current (A) ine
130 120 110 100 90 80 70 60 0 100 200 300 400 500 600 700 800 900 Average On-state Current (A) 30° 60° 90° 120° 180°
Conduction Period
VSK.500.. S eries R thJC (DC) = 0.065 K/ W
16000 15000 14000 13000 12000 11000 10000 9000 8000 7000 1
At Any Rated Loa d Cond ition And With Rated VRRM Ap p lied Following S urge. Initial T = 130°C J
@60 Hz 0.0083 s @50 Hz 0.0100 s
DC
VSK.500.. S eries Per Junction 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 2 - Current Ratings Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
Maximum Average On-state Power Los (W) s
Peak Half S Wave On-state Current (A) ine
700 600 500 400 300 200 100 0 0 100 200 300 400 500 Average On-state Current (A)
Conduc tion Angle
18000 16000 14000 12000 10000 8000
180° 120° 90° 60° 30° R MSLimit
Ma ximum Non R etitive S ep urge Current Versus Pulse T rain Dura tion. Control Of Cond uc tion Ma y Not Be Maintained. Initial T = 130°C J No Voltage Reapplied Rated VRRMReapplied
VSK.500.. S eries Per Junction TJ= 130°C
VSK.500.. S eries Per Junction 0.1 Pulse T rain Duration (s) 1
6000 0.01
Fig. 3 - On-State Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
www.vishay.com 4
For technical questions, contact: ind-modules@vishay.com
Document Number: 94420 Revision: 20-Mar-08
VSK.500-..PbF Series
Thyristor/Diode and Thyristor/Thyristor Vishay High Power Products TM Power Modules), 500 A (SUPER MAGN-A-PAK
750 700 180° 650 120° 0. 16 90° 600 K/ 60° W 550 0.2 30° K/ 500 Conduction Angle W 450 400 0.3 K/ W 350 0.4 300 K/ W 250 0.6 K 200 /W 150 VSK.500.. S eries Per Module 100 T = 130°C 50 J 0 0 100 200 300 400 500 600 700 800 0 20 T otal R Output Current (A) MS Maximum T otal On-state Power Loss (W)
09 0. W K/
Maximum Allowable Ambient T emperature (°C)
Fig. 7 - On-State Power Loss Characteristics
12 0. W K/
S R th
A
= 07 0. W K/ e lt -D a R
40
60
80
100
120
3000 Maximum T otal Power Loss (W) 2500 2000
0.0 5
180° (S ine) 180° (R ect)
0. 02
Rt
A hS
0. 03
K/ W
= 01 0.
K/ W
W K/ ta el -D
1500 1000 500 0 0 200 400 600 800 1000 0 2 x VSK.500.. Series S ingle Phase B ridge Connected T J = 130°C
K/ W
0.0 8K /W 0.12 K/ W 0.2 K /W
R
20
40
60
80
100
120
T otal Output Current (A)
Maximum Allowable Ambient T emperature (°C)
Fig. 8 - On-State Power Loss Characteristics
4500 Maximum T otal Power Loss (W) 4000 3500 3000 2500 2000 1500 1000 500 0 0 250 500 750 0 1000 1250 1500 20 40 60 80 100 120 T otal Output Current (A) Maximum Allowable Ambient T emperature (°C) 3 x VSK.500.. S eries T hree Phase B ridge Connected T J = 130°C 120° (R ect)
R
SA th
=
0. 02 K/ W 0.0 3K /W
0. 01
K/ W
-D el ta
R
0.0 5K /W 0.08 K/ W
0.2 K/ W
Fig. 9 - On-State Power Loss Characteristics
Document Number: 94420 Revision: 20-Mar-08
For technical questions, contact: ind-modules@vishay.com
www.vishay.com 5
VSK.500-..PbF Series
Vishay High Power Products
Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAKTM Power Modules), 500 A
T rans ient T hermal Impedance Z thJC (K W) / 0.1 VSK.500.. S eries Per Junc tion
10000 Instantaneous On-state Current (A)
1000
TJ= 25°C TJ= 130°C
0.01
S teady S tate Value: RthJC = 0.065 K/ W (DC Operation) 0.001 0.001 0.01 0.1 1 10 100
VSK.500.. S eries Per Junction 100 0.5 1 1.5 2 2.5 3 3.5 4 4.5
Instantaneous On-s tate Voltage (V)
S quare Wave Pulse Duration (s)
Fig. 10 - On-State Voltage Drop Characteristics
Fig. 11 - Thermal Impedance ZthJC Characteristics
100 Instantaneous Gate Voltage (V)
R ectangular gate pulse a) R ecommended load line for rated di/ dt : 20V, 10ohms; tr
