VT5200

New Product VT5200, VFT5200, VBT5200, VIT5200 Vishay General Semiconductor Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.58 V at IF = 2.5 A TO-220AC TMBS ® FEATURES ITO-220AC • Trench MOS Schottky technology • Low forward voltage drop, low power losses • High efficiency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 2 VT5200 PIN 1 PIN 2 CASE 2 1 VFT5200 PIN 1 PIN 2 • Solder dip 275 °C max. 10 s, per JESD 22-B106 (for TO-220AC, ITO-220AC and TO-262AA package) • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 1 TYPICAL APPLICATIONS For use in high frequency converters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. TO-263AB K K TO-262AA MECHANICAL DATA A NC VBT5200 NC A K HEATSINK A K NC VIT5200 NC A K HEATSINK Case: TO-220AC, ITO-220AC, TO-263AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum per PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 5.0 A TJ max. 5.0 A 200 V 80 A 0.65 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH Peak repetitive reverse current at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C Voltage rate of change (rated VR) Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min Operating junction and storage temperature range SYMBOL VRRM IF(AV) IFSM EAS IRRM dV/dt VAC TJ, TSTG VT5200 VFT5200 200 5.0 80 30 0.5 10 000 1500 - 40 to + 150 VBT5200 VIT5200 UNIT V A A mJ A V/μs V °C Document Number: 89176 Revision: 09-Dec-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 New Product VT5200, VFT5200, VBT5200, VIT5200 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Breakdown voltage TEST CONDITIONS IR = 1.0 mA IF = 2.5 A Instantaneous forward voltage IF = 5.0 A IF = 2.5 A IF = 5.0 A VR = 180 V Reverse current VR = 200 V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms TA = 25 °C TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C IR (2) SYMBOL VBR TYP. 200 (minimum) 0.81 1.10 0.58 0.65 1.7 1.8 2.5 MAX. 1.60 V 0.73 150 10 μA mA μA mA UNIT V THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RθJC VT5200 3.5 VFT5200 7.0 VBT5200 3.5 VIT5200 3.5 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC ITO-220AC TO-263AB TO-263AB TO-262AA PREFERRED P/N VT5200-E3/4W VFT5200-E3/4W VBT5200-E3/4W VBT5200-E3/8W VIT5200-E3/4W UNIT WEIGHT (g) 1.82 1.65 1.36 1.36 1.44 PACKAGE CODE 4W 4W 4W 8W 4W BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube DELIVERY MODE Tube Tube Tube Tape and reel Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 6 4.8 Resistive or Inductive Load 5 V(B,I)T5200 4.4 D = 0.5 D = 0.3 D = 0.2 D = 0.8 Average Forward Rectified Current (A) Average Power Disspation (W) 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 D = 0.1 4 VFT5200 3 D = 1.0 T 2 1 Mounted on Specific Heatsink 0 0 25 50 75 100 125 150 D = tp/T 0 1 2 3 4 tp 5 6 Case Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Forward Power Dissipation Characteristics Document Number: 89176 Revision: 09-Dec-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com New Product VT5200, VFT5200, VBT5200, VIT5200 Vishay General Semiconductor 100 1000 TA = 150 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TA = 125 °C TA = 100 °C Junction Capacitance (pF) 1.6 100 1 TA = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 10 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 10 TA = 150 °C 1 TA = 125 °C TA = 100 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) Junction to Case VFT5200 0.1 V(B,I)T5200 0.01 0.001 TA = 25 °C 0.0001 20 30 40 50 60 70 80 90 100 1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance Document Number: 89176 Revision: 09-Dec-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 New Product VT5200, VFT5200, VBT5200, VIT5200 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54)MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 2 CASE ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.671 (17.04) 0.651 (16.54) PIN 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.635 (16.13) 0.625 (15.87) 1 PIN 2 0.603 (15.32) 0.573 (14.55) 0.600 (15.24) 0.580 (14.73) 7° REF. 0.350 (8.89) 0.330 (8.38) 1 2 0.191 (4.85) 0.171 (4.35) 7° REF. 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027(0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.025 (0.64) 0.015 (0.38) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-262AA 0.411 (10.45) MAX. 0.250 (6.35) MIN. K 0.055 (1.40) 0.047 (1.19) 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 30° (TYP.) (REF.) 0.950 (24.13) 0.920 (23.37) NC 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.510 (12.95) 0.470 (11.94) K A 0.350 (8.89) 0.330 (8.38) 0.401 (10.19) 0.381 (9.68) 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 3 PIN 2 HEATSINK 0.560 (14.22) 0.530 (13.46) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.35) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) NC K A 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 89176 Revision: 09-Dec-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1