VTF369BX

VTF (Standard) Vishay Thin Film Conformal, Single In-Line Resistor Networks (Standard) FEATURES Actual Size • Lead (Pb)-free available Pb-free • Off-the-shelf delivery • Wide variety of standards Available RoHS* COMPLIANT THROUGH HOLE NETWORKS VISHAY Thin Film resistor networks are designed to be used in analog circuits in conjunction with operational amplifiers. Engineers can use these circuits to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. This family of standard resistor networks will continually be expanded with new and innovative designs, and VISHAY Thin Film stocks most designs in house for off-the-shelf convenience. However, if you can not find the standard network you need, call Applications Engineering at (716) 283-4025, as we may be able to meet your requirements with a semicustom “match” for a quick delivery. For standard networks with tighter specifications, or for custom networks, contact Applications Engineering at the above number. For a quick review of typical applications, request VISHAY’s Guide to Understanding and Using Thin Film Precision Networks. • Small size (SIP) • Standard designs - no NRE • Low capacitance < 0.1 pF/PIN • Flame resistant (UL94V-0 rating) TYPICAL PERFORMANCE ABS TCR 10 ABS TOL 0.1 TRACKING 2 RATIO 0.02 Complete Electrical Specifications at the end of schematics. SCHEMATIC R1 = R2 R1 R2 TWO EQUAL RESISTORS ORDERING INFORMATION R1 = 1K: 2K: VTF209BX VTF210BX VTF211BX VTF212BX VTF213BX 50K: 100K: 200K: 500K: 1M: VTF214BX VTF215BX VTF216BX VTF217BX VTF218BX 1 2 3 Actual Size 5K: 10K: L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 218 where Seated Height = 0.342" (8.69 mm) Max. 20K: Lead (Pb)-free option add “S” after part number, e.g: VTF209SBX R1 + R2 = 10K, 100K, 1M R1 + R2 ———— = 10 R2 R1 R2 RATIO DIVIDER 10:1 ORDERING INFORMATION R1 + R2 = 9K + 1K = 10K: VTF280BX VTF193BX VTF281BX 1 2 3 Actual Size 90K + 10K = 100K: 900K + 100K = 1M: L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 281 where Seated Height = 0.362" (9.19 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF280SBX * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 74 For technical questions, contact: thin-film@vishay.com Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film DIVIDER NETWORK 10:1 R1 = 100K, 1M R1 ——— = 10 R2 R1 ORDERING INFORMATION R2 R1 = 100K: VTF282BX Actual Size 1 2 3 L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 283 where Seated Height = 0.362" (9.19 mm) Max. R1 =1M: VTF283BX TWO EQUAL RESISTORS - ISOLATED R1 = R2 R1 R2 ORDERING INFORMATION R1 = 1K: 2K: 5K: 10K: 20K: 25K: VTF365BX VTF997BX VTF998BX VTF363BX VTF1104BX VTF999BX 50K: 100K: 200K: 500K: 1M: VTF1000BX VTF348BX VTF1105BX VTF1106BX VTF1103BX 1 2 3 4 Actual Size L = Total Length = 0.420" (10.67 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF365SBX THROUGH HOLE NETWORKS RATIO DIVIDER 10:1 AND 100:1 R1 + R2 + R3 = 100K R1 R1 + R2 + R3 R3 = 100 R2 9K 2 3 R3 1K 4 Actual Size ORDERING INFORMATION 90K 1 R1 + R2 + R3 = 10 R2 + R3 R1 + R2 + R3 = 100K: VTF330BX L = Total Length = 0.420" (10.67 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF330SBX R1 = R2 = R3 = R4 = 10K, 100K R1 1 2 3 R2 4 R3 5 R4 Actual Size FOUR EQUAL RESISTORS ONE COMMON ORDERING INFORMATION R1 = 10K: VTF366BX VTF367BX 100K: L = Total Length = 0.520" (13.21 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF366SBX DIVIDER NETWORK 2:1 R1 = 10K R2 R1 =1 R1 R2 R3 ORDERING INFORMATION 10K R1 x R2 R3 = R1 + R2 1 2 10K 3 4 5K 5 Actual Size VTF1087BX L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1087SBX Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: thin-film@vishay.com www.vishay.com 75 VTF (Standard) Vishay Thin Film R1 = 10K R2 —— = 2 R1 Conformal, Single In-Line Resistor Networks (Standard) R1 10K R2 20K R3 6.667K DIVIDER NETWORK 2:1 ORDERING INFORMATION 1 R1 x R2 R3 = —————— R1 + R2 2 3 4 5 Actual Size VTF1088BX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1088SBX R1 = 10K R2 —— = 5 R1 R1 x R2 1 R3 = ——————— R1 + R2 R1 10K R2 50K R3 8.333K DIVIDER NETWORK 5:1 ORDERING INFORMATION 2 3 4 5 Actual Size VTF1089BX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1089SBX THROUGH HOLE NETWORKS R1 = 10K R2 —— = 10 R1 R1 10K R2 100K R3 9.09K DIVIDER NETWORK 10:1 ORDERING INFORMATION 2 3 R1 x R2 1 R3 = —————— R1 + R2 NOTE: R2 TC Tracking 3 ppm/°C 4 5 Actual Size VTF1090BX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1090SBX R1 = 5K, 10K, 100K, 1M R1 = R2 R1 R2 DIVIDER NETWORK 1:1 R2 R1 ORDERING INFORMATION R1 = 5K: VTF225BX VTF286BX VTF219BX VTF287BX 10K: 100K: 1M: 1 2 3 4 5 6 Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 287 Seated Height = 0.362" (9.19 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF225SBX R1 = 10K, 100K R1 —— = 2 R2 DIVIDER NETWORK 2:1 R2 R2 R1 R1 ORDERING INFORMATION R1 = 10K: VTF1009BX VTF1010BX 1 2 3 4 5 6 Actual Size 100K: L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1009SBX www.vishay.com 76 For technical questions, contact: thin-film@vishay.com Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film R1 = 10K, 100K R1 —— = 5 R2 DIVIDER NETWORK 5:1 R2 R2 R1 R1 ORDERING INFORMATION R1 = 10K: VTF1007BX 1 2 3 4 5 6 100K: VTF1008BX Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1007SBX R1 = 10K R2 —— = 10 R1 1 R1 R2 R1 R2 DIVIDER NETWORK 10:1 ORDERING INFORMATION 2 3 4 5 6 Actual Size R1 = 10K: VTF220BX L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF220SBX THROUGH HOLE NETWORKS R1 = 10K, 100K, 1M R1 —— = 10 R2 DIVIDER NETWORK 10:1 R2 R2 R1 R1 ORDERING INFORMATION R1 = 10K: VTF328BX VTF284BX VTF285BX 1 2 3 4 5 6 Actual Size 100K: L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 285 Seated Height = 0.320" (8.13 mm) Max. 1M: Lead (Pb)-free option add “S” after part number, e.g: VTF328SBX DIVIDER NETWORK 20:1 R1 = 10K, 50K, 200K, 1M R1 —— = 20 R2 R1 R2 R2 R1 ORDERING INFORMATION R1 = 10K: 50K: VTF1073BX VTF1074BX VTF1107BX VTF1108BX 1 2 3 4 5 6 Actual Size 200K: 1M: L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1073SBX R1 = 1M R1 —— = 100 R2 1 R1 R2 R2 R1 DIVIDER NETWORK 100:1 ORDERING INFORMATION 2 3 4 5 6 Actual Size R1 = 1M: VTF1109BX Lead (Pb)-free option add “S” after part number, e.g: VTF1109SBX Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: thin-film@vishay.com www.vishay.com 77 VTF (Standard) Vishay Thin Film Common Mode Division Ratio 250, 100, 50 R1 = R3 = 1M R2 = 4K, 10K, 20K R4 = 3.984K, 9.901K, 19.608K R5 = 900K, 950K, 975K R6 = 100K, 50K, 25K Conformal, Single In-Line Resistor Networks (Standard) SIX RESISTOR NETWORK (Designed for Unity Gain/High Common Mode Voltage Rejection Differential Amplifier) ORDERING INFORMATION R5 R6 R1 1M 1 2 3 4 5 6 R2 R4 R3 1M 7 Actual Size R1 R2 = Division Ratio = 250: VTF442BX 100: 50: VTF443BX VTF444BX L = Total Length = 0.720" (18.29 mm) Max. H = Seated Height = 0.360" (9.14 mm) Max. Maximum voltage to pins #3 and #7 is 300 V Lead (Pb)-free option add “S” after part number, e.g: VTF442SBX FOUR EQUAL RESISTORS ISOLATED THROUGH HOLE NETWORKS R1 = 1K, 10K, 25K, 50K, 100K R1 R1 R1 R1 ORDERING INFORMATION R1 = 1K: 2K: VTF329BX VTF1001BX VTF1002BX VTF158BX VTF1003BX VTF1004BX VTF288BX 1 2 3 4 5 6 7 8 Actual Size 5K: 10K: L = Total Length = 0.820" (20.83 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. 25K: 50K: 100K: Lead (Pb)-free option add “S” after part number, e.g: VTF329SBX R1 = 1K, 10K, 100K R1 R1 R1 R1 FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION R1 = 1K: VTF1005BX 1 2 3 4 5 6 7 8 Actual Size 10K: VTF1006BX 100K: Absolute Tolerance = 0.1 % Ratio Tolerance = 0.1 % L = Total Length = 0.820" (20.83 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. VTF1137BX Lead (Pb)-free option add “S” after part number, e.g: VTF1005SBX www.vishay.com 78 For technical questions, contact: thin-film@vishay.com Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film EIGHT EQUAL RESISTORS ONE COMMON Actual Size R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K R1 1 2 3 R2 4 R3 5 R4 6 R5 7 R6 8 R7 9 R8 ORDERING INFORMATION R1 = 10K: VTF368BX 100K: VTF369BX L = Total Length = 0.920" (23.37 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF368SBX EIGHT RESISTOR NETWORK (Designed for Instrument Amplifier with Shield Driver) Actual Size 10K 1K 9K 1K REF. 1 2 3 4 5 6 7 8 9 1K 9K 1K 10K ORDERING INFORMATION VTF272BX THROUGH HOLE NETWORKS L = Total Length = 0.920" (23.37 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF272SBX R = 10K, 1K EIGHT BIT R/2R LADDER NETWORK ORDERING INFORMATION Actual Size (± 1/2 LSB) R = 1K: VTF1072BX VTF267BX R R R R R R R 2R 1 2 2R 3 2R 4 2R 5 2R 6 2R 7 2R 8 2R 9 2R 10 R = 10K: L = Total Length =1.020" (25.91 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1072SBX R1 = 1K RESISTANCE DOUBLER ORDERING INFORMATION Actual Size VTF1011BX Lead (Pb)-free option add “S” after part number, e.g: VTF1011SBX 1K R1 1 2 2K R2 3 4K R3 4 8K R4 5 16K R5 6 32K R6 7 64K R7 8 128K R8 9 256K R9 10 Absolute Tolerance = ± 0.1 % Ratio Tolerance = ± 0.1 % TCR Tracking = ± 3 ppm/°C L = Total Length = 1.02" (25.91 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: thin-film@vishay.com www.vishay.com 79 VTF (Standard) Vishay Thin Film Conformal, Single In-Line Resistor Networks (Standard) STANDARD ELECTRICAL SPECIFICATIONS TEST Material Tracking TCR*: Absolute Ratio Tolerance: Absolute Stability: Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Absolute Shelf Life Stability: ΔR Ratio ± 0.1 % ≤ 0.01 % ± 0.01 ppm/V 100 V 0 °C to + 70 °C - 55 °C to + 125 °C - 35 dB < 0.1 µV/°C 100 ppm 20 ppm 1 year at + 25 °C 1 year at + 25 °C + 25 °C 2000 h at + 70 °C ± 10 ppm/°C ± 0.02 % 0 °C to + 70 °C + 25 °C SPECIFICATIONS Passivated nichrome ± 2 ppm/°C 0 °C to + 70 °C CONDITIONS THROUGH HOLE NETWORKS Ratio DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Pin #1 VISHAY logo H Date Code E DIMENSION A B C D INCHES 0.125 (min.) 0.010 (min.) 0.100 0.020 typ. 0.100 max. 0.010 typ. MM 3.17 0.25 2.54 typ. 0.51 2.54 0.25 B A E F F C L D NOTE: “L” and “H” (length and height) dimensions for each model are found alongside the schematic drawing. MECHANICAL SPECIFICATIONS Resistive Material Substrate Material Body Terminals Plating Marking Resistance to Solvents Lead (Pb)-free Option Lead (Pb)-free Finish Passivated nichrome Alumina Epoxy coated Copper Sn 60 Per MIL-PRF-83401 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Hot solder dip www.vishay.com 80 For technical questions, contact: thin-film@vishay.com Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF211BX (preferred part number format) V V T T F F 1 2 0 1 0 1 4 S B B X X GLOBAL MODEL VTF PART NUMBER (3 or 4 digits) xxx or xxxx Example: 214 1004 LEAD (Pb)-FREE (0 or 1 digits) S = Lead (Pb)-free (e1) None = Tin lead PACKAGING BX = Conductive foam box Historical Part Number example: VTF 211 (will continue to be accepted) VTF MODEL 211 PART NUMBER THROUGH HOLE NETWORKS www.vishay.com 81 Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: thin-film@vishay.com Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1