WA20S-BD-A

A20 and WA20 Vishay Dale Rack and Panel Connectors Side Mount FEATURES • Body components available with any desired pin and socket combination • Floating contacts • Polarization accomplished by reversed pin and socket combination • Model A20 has barriers for increased creepage distance • Thru hole permits use of building block technique or flat mounting WA20 A20 APPLICATIONS Broad - limited only by those applications requiring physical, electrical and/or materials specifications exceeding those indicated. MATERIAL SPECIFICATIONS Standard Body: Glass-filled diallyl phthalate per ASTM D 5948-96 Green, Flame Retardant Pin Contacts: Brass Socket Contacts: Phosphor bronze Contact Plating: Gold, 10 micro-inches ELECTRICAL SPECIFICATIONS Breakdown Voltage (Contact to Contact): At sea level: 2000 V RMS At 70 000 feet [21 336 meters]: 500 V RMS Current Rating: 7.5 amps PHYSICAL SPECIFICATIONS Minimum Creepage Path between Contacts: A20 = 0.08" [2.03 mm]; WA20 = 0.05" [1.27 mm] Minimum Air Space between Contacts: A20 = 0.08" [2.03 mm]; WA20 = 0.05" [1.27 mm] Contact, Center to Center: A20 = 0.150" [3.18 mm]; WA20 = 0.125" [3.17 mm] DIMENSIONS in inches [millimeters] A20P-CD 0.180 [4.57] 0.093 [2.36] Dia. Thru Contact Socket 0.150 [3.81] Lettering on Wire Side Only B D 0.265 [6.73] Contact Pin 0.218 [5.54] Solder Cups Accommodate #20 AWG Wire 0.200 [5.08] 0.360 [9.14] 0.031 [0.79] 0.750 [19.05] 0.750 [19.05] 0.360 [9.14] 0.180 [4.57] Solder Cups Accommodate #20 AWG Wire B 0.437 [11.11] D 0.275 [6.99] A C 0.437 [11.10] A C 0.040 [1.02] Dia. 0.275 [6.99] A20S-CD 0.200 [5.08] 0.040 [1.02] Dia. 0.218 [5.54] 0.150 [3.81] Lettering on Wire Side Only 0.265 [6.73] Contact Socket 0.093 [2.36] Dia. Th?ru 0.031 [0.79] www.vishay.com 12 For technical questions, contact: connectors@vishay.com Document Number: 36018 Revision: 08-Feb-07 A20 and WA20 Rack and Panel Connectors Side Mount DIMENSIONS in inches [millimeters] WA20P-CD 0.170 [4.32] 0.093 [2.36] Dia. Thru Contact Socket 0.125 [3.18] Lettering on Wire Side Only Vishay Dale Contact Pin 0.040 [1.02] Dia. 0.220 [5.59] 82° C-sink (Far Side) Solder Cups Accommodate #20 AWG Wire 0.340 [8.64] 0.750 [19.05] 0.440 [11.18] A B DALE WA20P C D 0.281 [7.14] 0.220 [5.59] 0.250 [6.35] WA20S-CD 0.220 [5.59] 0.040 [1.02] Dia. 0.220 [5.59] 0.750 [19.05] 0.340 [8.64] 0.170 [4.32] Solder Cups Accommodate #20 AWG Wire 0.440 [11.18] B A DALE WA20S D C 0.125 [3.18] Lettering on Wire Side Only 0.281 [7.14] 82° C-sink 0.172 [4.37] Contact Socket 0.093 [2.36] Dia. Thru 0.250 [6.35] ORDERING INFORMATION A20 WA20 MODEL P BODY STYLE AB CONTACT LOCATION A EMPTY CONTACT POSITIONS Specify by contact identification letter (A, B, etc.) any contact positions which are to be left empty (omit, if none required). Side Mount with 4 positions for #20 AWG contacts. P - Designates pin style body. S - Designates socket style body. These designations are used to identify mating connectors, however, any combination of pin and socket contacts may be ordered in either style body. Therefore, when designators 3 and 4 are the same, a connector designated A20P or WA20P will mate with a connector designated A20S or WA20S. Example: A20P-CD mates with A20S-CD A20S-AB mates with A20P-CD EXAMPLE 2: A20S-CD or WA20S-CD = Connector with socket contacts in positions “C” and “D” and pin contacts in positions “A” and “B” (would mate with Example 1 at left). Designates pin contact positions in an A20P or WA20P connector or socket contact positions in an A20S or WA20S connector (specify “A”, “B”, “C”, “D” or any combination of the four). EXAMPLE 1: A20P-CD or WA20P-CD = Connector with pin contacts in positions “C” and “D” and socket contacts in positions “A” and “B”. EXAMPLE 3: A20P-BC or WA20P-BC-A = Connector with pin contacts in positions “B” and “C”,socket contact in position “D” and no contact in position “A” (would mate with A20S-BC or WA20S-BC-A). Document Number: 36018 Revision: 08-Feb-07 For technical questions, contact: connectors@vishay.com www.vishay.com 13 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1