WOMC1XX-XXX-XT3

WOMC Vishay Thin Film SURFACE MOUNT NETWORKS Molded, 50 Mil Pitch, Dual In-Line Resistor Networks, Wide Body FEATURES • Lead (Pb)-free available • Standard 16 and 20 Pin Counts (0.300" Wide Body) JEDEC MS-013 • Rugged, molded case construction • High stable thin film element (500 ppm at + 70 °C, 10 000 hours) • Leads copper alloy, solderable Pb-free Available RoHS* COMPLIANT Actual Size 20 Pin TYPICAL PERFORMANCE The WOMC series features a standard 16 and 20 pin wide body (0.30") small outline surface mount style that can accommodate resistor networks to your particular application requirements. The networks can be constructed with Passivated Nichrome, or Tantalum Nitride resistor films to optimize performance. ABS TCR 25 ABS TOL 0.1 TRACKING 5 RATIO 0.05 SCHEMATIC Custom schematics available Please consult factory STANDARD ELECTRICAL SPECIFICATIONS TEST Pin Number Resistance Range TCR: Tolerance: Power Rating: Stability: Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Ratio Tracking Absolute Ratio Absolute Resistor Package ΔR Absolute ΔR Ratio SPECIFICATIONS 16, 20 100 Ω to 500 kΩ total ± 5 ppm/°C typical ± 50 ppm/°C to 25 ppm/°C ± 0.1 % to ± 0.05 % ± 1.0 % to ± 0.1 % 50 mW per element 500 mW; 1.0 W 500 ppm 150 ppm 0.1 ppm/V 50 V - 55 °C to + 125 °C - 55 °C to + 150 °C < - 30 dB 0.08 µV/°C 100 ppm < 20 ppm 1 year ratio at + 25 °C 1 year ratio at + 25 °C - 55 °C to + 125 °C - 55 °C to + 125 °C + 25 °C + 25 °C Max. at + 70 °C Max. at + 70 °C 2000 h at + 70 °C 2000 h at + 70 °C CONDITIONS * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60010 Revision: 15-May-07 For technical questions, contact: thin-film@vishay.com www.vishay.com 31 SURFACE MOUNT NETWORKS WOMC Vishay Thin Film Molded, 50 Mil Pitch, Dual In-Line Resistor Networks, Wide Body DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION H E HE Index Area PIN 1 Locator h x 45 O C e B L A1 A 16 INCHES 0.408 0.298 0.410 0.097 0.050 0.016 0.009 0.026 0.007 0.015 MM 10.36 7.57 10.41 2.46 1.27 0.406 0.228 0.66 0.177 0.381 INCHES 0.408 0.298 0.500 0.097 0.050 0.016 0.009 0.026 0.007 0.015 20 MM 10.36 7.57 12.7 2.46 1.27 0.406 0.228 0.66 0.177 0.381 O A e ° B C L A1 h MECHANICAL SPECIFICATIONS Resistive Material Body Plating Marking Resistance to Solvents Substrate Material Terminals Lead Coplanarity Lead (Pb)-free Option Lead (Pb)-free Finish Passivated Nichrome or Tantalum Nitride Molded Epoxy Solder Per MIL-PRF-83401 Silicon Copper ± 0.004 100 % Sn Matte Plated ORDERING INFORMATION CHECK LIST (CUSTOMS) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range Lead (Pb)-free example: WOMCTXXXXA MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 4. Specify if lead (Pb)-free www.vishay.com 32 For technical questions, contact: thin-film@vishay.com Document Number: 60010 Revision: 15-May-07 WOMC Molded, 50 Mil Pitch, Dual In-Line Resistor Networks, Wide Body GLOBAL PART NUMBER INFORMATION New Global Part Numbering: WOMC1xx-xxxT1 (preferred part number format) SURFACE MOUNT NETWORKS Vishay Thin Film W W O O M M C C T 1 1 x x x x - x x x x x x x T T 1 1 GLOBAL MODEL (4 or 5 digits) WOMC (Tin Lead) WOMCT (Lead (Pb)-free) (e3) CUSTOM PART NUMBER (7 or 9 digits) 1xx-xxx or 1xx-xxx-x PACKAGING TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel 1000 TS = 100 Min 1 Mult UF = TUBED Historical Part Number example: WOMC1xx-xxxA (will continue to be accepted) WOMC SERIES 1xx-xxx CUSTOM PART NUMBER A TOLERANCE Document Number: 60010 Revision: 15-May-07 For technical questions, contact: thin-film@vishay.com www.vishay.com 33 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1