WYO103MCMBJ0KR

WYO Vishay Draloric Ceramic AC Capacitors Class X1, 440 VAC/Class Y2, 250 VAC DESIGN: D Max. S Max. 3 Max. Disc capacitors with epoxy coating RATED VOLTAGE UR: (X1): (Y2): 440 VAC, 50 Hz (IEC 60384-14.2) 250 VAC, 50 Hz (IEC 60384-14.2) 250 VAC, 60 Hz (UL1414, CSA C22.2) V ± 0.5 RoHS COMPLIANT F±1 L = 30 - 3 DIELECTRIC STRENGTH BETWEEN LEADS: Component test: 2500 VAC, 50 Hz, 2 s, for parts with pitch ≥ 7.5 mm As repeated test admissible only once with 2000 VAC, 50 Hz, 2 s Random sampling test (destructive test): 1500 VAC, 50 Hz, 60 s Ø 0.6 ± 0.05 • Dimensions in mm Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Z [Ω] 102 DIELECTRIC STRENGTH OF BODY INSULATION: 2000 VAC, 50 Hz, 60 s (destructive test) 101 DISSIPATION FACTOR tan δ: ≤ 25 • 10-3 10 INSULATION RESISTANCE Ris: ≥ 6 • 109 Ω 10-1 2.5 nF 1 nF 12 nF 5 nF CATEGORY TEMPERATURE RANGE ϑA: (- 40 to + 125) °C 10-2 0.1 I = f (UR) (typ.) CLIMATIC CATEGORY ACC. TO EN60068-1: 100 [MHz] 1 f 10 40/125/21 I~ [µA] 500 10 nF 5 nF 400 3.3 nF 300 2.2 nF 200 COATING: Epoxy, dipped, insulating, flame retarding acc. to UL 94V-0 TAPING AND SPECIAL LEAD CONFIGURATIONS: On request MARKING (EXAMPLE): WYO 4n7 M IEC 384-14/2 1.0 nF 100 440 ~ X1 WYO 2n2 M 250 ~ Y2 440 250 250 ~ X1 Y2 0 0 50 100 150 200 250 UR [V~] WYO 1 nF to 2.5 nF WYO 3.3 nF to 12 nF All approval marks are also shown on the label. Document Number: 22202 Revision: 31-Jan-06 www.vishay.com 44 For technical questions contact: slcap@vishay.com WYO Ceramic AC Capacitors Class X1, 440 VAC/Class Y2, 250 VAC ORDERING INFORMATION, CERAMIC X1 / Y2 CAPACITORS WYO CAPACITANCE (pF) 1000 1500 1800 2200 2500 3300 4700 5000 6800 8200 0.010 µF 0.012 µF ± 20 % TOL. (%) Dxs (mm) 6.5 x 4.5 8.0 x 4.5 8.0 x 4.5 9.0 x 4.5 9.0 x 4.5 10.0 x 4.5 12.0 x 4.5 12.0 x 4.5 17.0 x 4.5 17.0 x 4.5 21.0 x 4.5 21.0 x 4.5 7.5 1.6 0.6 5.0 1.4 F ± 1* (mm) d ± 0.05* (mm) V ± 0.5* (mm) ORDERING CODE WYO102 CM WYO152 CM WYO182 CM WYO222 CM WYO252 CM WYO332 CM WYO472 CM WYO502 CM WYO682 CM WYO822 CM WYO103 CM WYO123 CM KR KR KR KR KR KR KR KR KR KR KR KR Vishay Draloric * Standard lead configuration, other lead spacing and diameter available on request. ORDERING CODE 7th digit 10th to 12th digit R 14th digit Capacitance Tolerance Lead Configuration (see General Information) RoHS Compliant Component ± 20 % = M APPROVALS IEC 60384 - 14 / 2nd Issue (1993) incl. Am. 1 (1995) - Safety Tests EN 132 400 (1994) - Safety Tests That approval together with the CB Test Certificate substitutes the national approval of the following nations: Belgium Denmark Germany Finland France Greece Ireland Iceland Italy Luxembourg Netherlands Norway Austria Portugal Sweden Switzerland China Singapore Slovenia Korea 1 nF ... 12 nF 1 nF ... 12 nF Japan Poland Hungaria Israel 250 Vac 440 Vac Spain United Kingdom Czech Republic Y2 - Capacitor: CB-Test Certificate: DE-1-11476-A1 X1 - Capacitor: CB-Test Certificate: DE-1-11148-A1 Minimum thickness of insulation: 0.4 mm Underwriters Laboratories Inc. UL 1414 Line-by-pass component Agency Files / Licences Canadian Standards Association CSA C22.2 No 1-98 Line-by-pass component Agency Files / Licences E 183 844 V1 S2 E 183 844 V1 S2 1 nF ... 12 nF 250 Vac 1 nF ... 12 nF 250 Vac ORDERING INFORMATION WYO SERIES 103 CAP. VALUE M TOLERANCE CM RATED VOLTAGE CF0 LEAD CONFIGURATION K INTERNAL CODE R RoHS COMPLIANT Document Number: 22202 Revision: 31-Jan-06 For technical questions contact: slcap@vishay.com www.vishay.com 45 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1