MVM302P10

3,000V Surface Mount Multiplier 1.0µA - 50.0µA • 10 Stages ELECTRICAL CHARACTERISTICS AND MAXIMUM RATINGS Part Number Maximum A.C. Input Voltage Maximum D.C. Output Voltage Maximum D.C. Output Voltage (Two Multipliers in Series) VDC 6000 Typical Output Current Range (1) µA 1.0 - 50.0 Typical Frequency Number of Stages V PP MVM302P10 800 VDC 3000 kHz 10 - 100 10 Operating Temp: -55°C to +150°C (1) Refer to load lines on next page. Storage Temp: -65°C to +150°C .060(1.52) Plating: 50µin silver over 50µin nickel. .400 (10.16) AC V2 .035(.89) V1 GND .100(2.54) AC .250 (6.35) .100(2.54) GND .050(1.27) .050(1.27) .100 (2.54) .010 (0.25) .280 (7.11) .520(13.21) .400 (10.16) .250 (6.35) .050 (1.27) .020 (0.51) .140(3.56) .030(0.76) (6 PL) .025 (.64) .360 (9.14) PAD LAYOUT .100 (2.54) AC V1 GND V2 Dimensions: In. (mm) • All temperatures are ambient unless otherwise noted. • Data subject to change without notice. VOLTAGE MULTIPLIERS INC. 8711 W. Roosevelt Ave. Visalia, CA 93291 TEL. 559-651-1402 FAX 559-651-0740 www.voltagemultipliers.com www.highvoltagepowersupplies.com 57 MVM302P10 Typical Single Multiplier Circuit Typical Circuit Showing Two Multipliers in Series VOUT MVM302P10 VMI D/C VOUT AC RL MVM302P10 VMI D/C MVM302P10 VMI D/C AC RL 3000 2500 SINGLE MULTIPLIER OUTPUT VOLTAGE VS. INPUT VOLTAGE 6000 5000 TWO MULTIPLIERS IN SERIES OUTPUT VOLTAGE VS. INPUT VOLTAGE 1.0µA Negative Output Voltage ( V) Output Voltage (V) 1.0µA Output Voltage (V) 2000 1500 10µA 4000 3000 2000 50µA 20µA 10µA 20µA 1000 50µA 500 0 100 1000 0 100 200 300 400 Input Voltage (Vpp) 500 600 200 300 400 Input Voltage (Vpp) 500 600 Dimensions: In. (mm) • All temperatures are ambient unless otherwise noted. • Data subject to change without notice. VOLTAGE MULTIPLIERS INC. 8711 W. Roosevelt Ave. Visalia, CA 93291 TEL. 559-651-1402 FAX 559-651-0740 www.voltagemultipliers.com www.highvoltagepowersupplies.com 58