KHV12-350S10N

KHV Series 3.5 Watt DC/DC CONVERTER 3.5 WATT HIGH VOLTAGE DC/DC CONVERTER OUTPUT SPECIFICATIONS Output Current (see table) See Chart Voltage Accuracy ± 5% or less Ripple and Noise See Chart Line Regulation, Full Load 0.01% typ Load Regulation (0% to 100% of FL) 0.01% Output Voltage Control Either with 0V to +6V external voltage or a 5KΩ external variable resistor. Over Current Protection Drooping characteristic, built-in automatic return circuit, activated at 105% or more On/Off Control Between 2pin and 5pin, on when open, and OFF when short circuited. FEATURES        Max. Output Capacity 3.5W Adjustable Output Voltage from 0 to 100% Control Voltage 0 to +6V Over Current Protection On/Off Control (Optional) Adjustable Voltage by Variable Resistor RoHS Compliant GENERAL SPECIFICATIONS Isolation (Input – Output) None Isolated (2 pin and 6 pin internally connected) DISCRIPTION Ripple Noise(typ) 100mVp-p The KHV series is an ultra-compact, medium-high voltage DC/DC converters with 5sided metal shield case. Output voltage can be adjusted by external voltage or external variable resistor, with built in short circuit and over current protection providing this unit with high reliability and long life. MTBF(Calculated) 400K hours ENVIRONMENTAL SPECIFICATIONS Operating Temperature -10° C ̴ +50° C ELECTRICAL SPECIFICATIONS Storage Temperature Range -25° C to +85° C All specifications are typical at nominal input, full load, and 25° C unless otherwise noted. Relative Humidity 20% to 95% RH PHYSICAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range 10.8 ̴ 16.5VDC Input Current 430mA Metallic Shielding 5 Sided Dimensions 60 x 40 x 15 mm Kaga Electronics (USA) Inc. 780 Montague Expressway, Suite #403, San Jose, CA 95131 Phone: (408) 570-0955 | Fax: (408) 570-0186 | Toll Free: (888) 2-VOLGEN (888-286-5436) www.volgen.com KHV Series 3.5 Watt MODEL INPUT VOLTAGE OUTPUT VOLTAGE ADJUSTABLE OUTPUT VOLTAGE RANGE OUTPUT CURRENT INPUT CURRENT RIPPLE NOISE KHV12-350S10P 10.8 ̴ 16.5VDC +350VDC 0 ̴ + 350 VDC 0 ̴ 10mA 430mA 100mVp-p KHV12-350S10N 10.8 ̴ 16.5VDC -350VDC 0 ̴ - 350 VDC 0 ̴ 10mA 430mA 100mVp-p Note 1. The output voltage will be controlled by applying the Vcont voltage. Using an adjustable resistor or an external voltage, voltage should be applied on the Vcont in in order to control the output voltage. When Vcont voltage=0V, the output voltage (output residual voltage) should be less than 2.0% of the max output voltage. 2. The ON/OFF control is optional. When ordering, add a suffix “R” to the end of the product name. (example: KHV12-350S10PR; R=Remote Control) DIMENSIONS: PIN OUTPUT: PIN CONNECTION TEST CIRCUIT: PIN DEFINE 1 +VIN 2 -VIN 3 Vcont 4 Vref 5 ON/OFF 6 Vout(Com) 7 HVout BLOCK DIAGRAM: 0～ 350V (0～ -350V) 1 +Vin H.V Out (+ or -) +Vin 1 7 12V C2 C1 Load Vin　Com SW1 Open=ON Short=OFF 2 SW1 Vin Com Vout Com 6 Vref ON/OFF Vcont C1=47μF C2=4700pF 3 5 4 (OPEN) + Output voltage control (Apply 0V～ 6V) High voltage oscillating transistor H.V Out (+ or -) high voltage rectification 7 Control IC + + 12V DC-AC Switching circuit Load Output voltage control Over current protection Standard voltage generating part 6 Vout (Com) 2 Voltage detection circuit SW1 Open=ON Short=OFF Case ON/OFF control part SW1 ON/OFF 5 Vref 4 Vcont 3 External voltage (0～6V) or VR （5KΩ） + Kaga Electronics (USA) Inc. 780 Montague Expressway, Suite #403, San Jose, CA 95131 Phone: (408) 570-0955 | Fax: (408) 570-0186 | Toll Free: (888) 2-VOLGEN (888-286-5436) www.volgen.com