KLS30F-12S

KLS30F 30 WATT OPEN FRAME POWER SUPPLY ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load. INPUT SPECIFICATIONS Input Voltage.............................................. 85-264VAC Input Frequency.......................................... 47-63 Hz Input Current (100V)................................... 0.2A (5V, 12V, 15V, 24V) Inrush Current (100V, 50Hz)......................... 20A (Cold Start) OUTPUT SPECIFICATIONS Output Voltage........................................... See Chart Output Voltage Adjustment Range.............. ± 10% (Optilonal) Over-Voltage Protection.............................. Zener Limiter Line Regulation........................................... 0.5% Over-Current Protection.............................. Automatic Recovery Load Regulation.......................................... 1.0% Hold-Up Time.............................................. 20 mS Rise Time.................................................... 200mS max. (At 25˚C nominal input / output) Drift............................................................. 0.5% + 15mv Leakage Current......................................... 0.5 mA or less Ripple and Noise........................................ 5% + 50 mV FEATURES LOW COST UNIVERSAL INPUT HIGH RELIABILITY OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION SUPER SMALL SIZE HIGH EFFICIENCY COMPACT LOW PROFILE PACKAGE TWO YEAR WARRANTY GENERAL SPECIFICATIONS MTBF........................................................... 100,000 hrs. Isolation Voltage Primary to Secondary............... 3000 VAC Primary to FG........................ 3000 VAC Secondary to FG.................... 500 VAC Isolation Resistance.................................... FG 50 MΩ (DC 500V) ENVIRONMENTAL SPECIFICATIONS Operating Temperature .............................. 0˚-60˚C Derates linearly 2.5%/˚C after 50˚C Cooling........................................................ Convection Temperature Coefficient.............................. 0.02% / ˚C Storage Temperature.................................. -20˚C - +75 ˚C SAFETIES / EMI Humidity...................................................... 30% - 85% Rh (Non-condensing) CB PHYSICAL SPECIFICATIONS Open Frame, Glass Epoxy PC Board 86 Series MODEL No. KLS30F-05S KLS30F-12S KLS30F-15S KLS30F-24S INPUT RATING 100-230V 100-230V 100-230V 100-230V 50-60HZ 50-60HZ 50-60HZ 50-60HZ OUTPUT VOLTAGE 5 VDC 12 VDC 15 VDC 24 VDC OUTPUT CURRENT 6.0 A 2.5 A 2.0 A 1.3 A EFFICIENCY AT 100% LOAD (TYP) 70% 70% 71% 72% KLS30F NOTE: All specifications typical and nominal / full load and 25˚C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. • Dimensions in mm 87