MT2-0512WI

MT2 2 WATT D C/DC C ONVER T ER, TER, SINGLE & M ULTIPLE O UTPUTS S INGLE ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load INPUT SPECIFICATIONS Input Voltage.................................... Wide Range Input Input Filter........................................ PI-Network OUTPUT SPECIFICATIONS Output Voltage Accuracy................. ±10% Efficiency.......................................... 60% typ. Over-Current Protection................... Built-in (Automatic Recovery) Ripple .............................................. 120 mVp-p (DC to 100MHZ) Line Regulation................................ ±0.5% Line Filter......................................... Built-in Load Regulation............................... ±1.0% max. (Load Rate 0% ~ 100%) Spike Noise (DC to 100 MHZ).....................Input 150 mVp-p max. Output 70 mVp-p max. FEATURES Full SMD Design with Ceramic Capacitors 5 SIDED METAL CASE HIGH EFFICIENCY AND RELIABILITY INTERNAL EMI FILTER LOW OUTPUT RIPPLE AND NOISE SHORT CIRCUIT PROTECTION DIRECT PCB-SOLDERING INDUSTRY STANDARD PINOUT (IC-24P) LOW PROFILE, 10mm (0.39”) HEIGHT FIVE YEAR WARRANTY GENERAL SPECIFICATIONS Isolation Voltage Primary to Secondary............... DC 500V/ 1min. 5mA Primary to Case........................ DC 500V/ 1min. 5mA Secondary to Case.................... DC 500V/ 1min. 5mA MTBF.............................................. >1,000,000 hours Isolation Resistance........................ INPUT-OUTPUT-CASE 50M-ohms min. (Measured at 500 VDC) ENVIRONMENTAL SPECIFICATIONS Operating Temperature ................... -25 - +75˚C Temperature Coefficient................... ±0.05%/ ˚C Humidity........................................... 30%~95% RH Storage Temperature....................... -25°C ~ +85°C EMI Complys with: CISPR CLASS A PHYSICAL SPECIFICATIONS Case Material.....................................Nickel-Plated Steel Dual Inline Pin Configuration 4 Series MODEL MT2-0505SI MT2-0512SI MT2-0515SI MT2-0512WI MT2-0515WI MT2-1205SI MT2-1212SI MT2-1212WI MT2-1215WI MT2-2405SI MT2-2412SI MT2-2412WI MT2-2415WI TYPE A: SINGLE OUTPUT 1, 12, 11, 10, 2, 3, 24 13 14 15 23 22 INPUT + V INPUT - V OUTPUT + V OUTPUT - V NC NC 1, 12, 11, 10, 2, 3, INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT 5 VDC 12 VDC 15 VDC +/-12 VDC +/-15 VDC 5 VDC 12 VDC +/-12 VDC +/-15 VDC 5 VDC 12 VDC +/-12 VDC +/-15 VDC 400mA 160mA 130mA +/-80mA +/-65mA 400mA 160mA +/-80mA +/-65mA 400mA 160mA +/-80mA +/-65mA TYPE A: DUALOUTPUT 24 13 14 15 23 22 INPUT + V INPUT - V OUTPUT1 + V OUTPUT1 - V OUTPUT2 + V OUTPUT2 - V 5 VDC (4.5 ~ 5.5V) 12 VDC (10.8 ~ 13.2V) 24 VDC (21.6 ~ 26.4V) NOTE: All specifications typical and nominal / full load and 25˚C unless otherwise noted. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. • Dimensions in mm 5