MT5A-1215SI

Kaga Electronics (USA) Inc. 2480 N. First St, Suite #100 San Jose, CA 95131 Tel: (408)570-0955 Fax: (408)570-0186 www.volgen.com 5 WATTS OUTPUT POWER 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE FIVE-SIDED SHIELD HIGH EFFICIENCY UP TO 84% STANDARD 24 PIN DIP PACKAGE FIXED SWITCHING FREQUENCY T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load (Note 1) Line regulation Load regulation Cross regulation(Dual) Ripple and noise Temperature coefficient Transient response recovery time 25% load step change Over load protection Short circuit protection % of FL at nominal input LL to HL at Full Load 25% to 100% FL Single Dual Asymmetrical load 25% / 100% FL Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 5 Watts, max ± 1% 10% of FL ± 0.2% ± 0.5% ± 1% ± 5% 50mVp-p ±0.02% / ºC, max 200uS 170%, typ Isolation resistance Isolation capacitance Switching frequency Case material Base material Potting material Dimensions Weight MTBF (Note 3) Efficiency Isolation voltage Input to Output Input ( Output ) to Case See table 1600VDC, min 1600VDC, min 10 ohms, min 300pF, max 300KHz, typ Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) 16g (0.55oz) 3.165 x 10 hrs 6 9 20MHz bandwidth Continuous, automatics recovery INPUT SPECIFICATIONS MT5A Input voltage range MT5A-W Input filter Input surge voltage 100mS max Input reflected ripple 12V input 24V input 48V input Nominal Vin and full load Power up 12V nominal input 24V nominal input 48V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC 9 – 36VDC 18 – 75VDC Pi type 36VDC 50VDC 100VDC 20mAp-p 450mS, max ENVIRONMENTAL SPECIFICATIONS Operating temperature range Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Nature convection Standard -25ºC~+85ºC (with derating) M1 (Note 2) -40ºC~+85ºC (non-derating) M2 (W series) -40ºC~+85ºC (with derating) +100ºC -55ºC ~ +105ºC 20ºC/watt MIL-STD-810D 10~55Hz, 10G, 30minitues along X,Y and Z 5% to 95% RH Nominal Vin and Start up time constant resistive load EMC CHARACTERISTICS Conducted emissions Radiated emissions ESD Radiated immunity Fast transient Surge Conducted immunity EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. CriteriaB Perf. CriteriaA Perf. CriteriaB Perf. CriteriaB Perf. CriteriaA Kaga Electronics (USA) Inc. 2480 N. First St, Suite #100 San Jose, CA 95131 Tel: (408)570-0955 Fax: (408)570-0186 www.volgen.com Efficiency (5) (%) 76 78 82 81 78 81 84 75 (76) 77 (79) 81 (81) 81 (84) 80 (78) 84 (82) 81 (84) 74 (73) 77 (79) 82 (80) 81 (82) 78 (76) 82 (80) 83 (80) Model Number MT5A-1233SI MT5A-1205SI MT5A-1212SI MT5A-1215SI MT5A-1205WI MT5A-1212WI MT5A-1215WI MT5A-2433SI (W) MT5A-2405SI (W) MT5A-2412SI (W) MT5A-2415SI (W) MT5A-2405WI (W) MT5A-2412WI (W) MT5A-2415WI (W) MT5A-4833SI (W) MT5A-4805SI (W) MT5A-4812SI (W) MT5A-4815SI (W) MT5A-4805WI (W) MT5A-4812WI (W) MT5A-4815WI (W) Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC Output Current 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA Input Current (4) 382mA 563mA 603mA 649mA 563mA 597mA 594mA 194mA (191mA) 285mA (278mA) 305mA (305mA) 325mA (312mA) 274mA (282mA) 288mA (295mA) 308mA (297mA) 98mA (100mA) 143mA (138mA) 151mA (155mA) 162mA (160mA) 141mA (145mA) 147mA (151mA) 150mA (156mA) Note 1. 2. 3. 4. 5. 6. The MT5A series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. BELLCORE TR-NWT-000332. Case 1： 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load There is no pin at PIN10 & PIN15 for MT5A-W series OUTPUT POWER (%) 120 100 80 60 40 20 0 -25 -5 15 35 55 75 95 115 1. All dimensions in Inches (mm) Tolerance : x.xx±0.02(x.x±0.5) x.xxx±0.01(x.xx±0.25) 2. Pin pitch tolerance ±0.014(0.35) AMBIENT TEMPERATURE(℃) DIP PIN CONNECTION PIN 2 3 9 10 11 SINGLE - INPUT - INPUT DUAL - INPUT - INPUT PIN 23 22 16 15 14 SINGLE + INPUT + INPUT DUAL + INPUT + INPUT NC COMMON NC (Note6) NC (Note6) NC - OUTPUT - OUTPUT COMMON NC (Note6) NC (Note6) + OUTPUT + OUTPUT