SPU12A-107

SPU12A SERIES 15W Wall Mount Switching Power Supplies For I.T .E. Description: The SPU12A series of AC/DC switching mode power supplies provide 15 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include a 2 prong plug-in mains connector for certain applications. All models meet FCC Part15 class B and are designed to comply with UL/c-UL(UL 60950) requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz 2 Prong Plug-In Mains Connector Output Voltage Available From 3VDC Thru 50VDC Optional Output Connector (See appendix) Single Output Class II Insulation (Double Insulation) Two years warranty Safety Approvals: PS E Electrical Characteristics: Sym. Vin Fin Wo Vo Io Iil Iih Irl Irh Eff Parameter Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Low Line Inrush Current High Line Inrush Current Efficiency Test Conditions Operating Voltage Vin=90 to 264VAC Min. 90 47 Typ. Max. 264 63 Unit VAC Hz W V A A A A A % % % % % mS mS 1 1 -0.04 2 2 0.04 S % mA %/°c 4 5 0.3 0 15 See rating chart See rating chart 0.4 0.3 12 26 60 70 0.5 3 Nil 15 30 78 1 7 Io=Full load, Vin=115VAC Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full Load, Io=Full Load Vin=230VAC Vin=230VAC 25°c, Cool start, 25°c, Cool start, Vin=230VAC REG-i Line Regulation REG-o Load Regulation OVP OCP Ttr Ts Vrn Tc Over Voltage Protection Over Current Protection Transient Response Start Up Time Ripple & Noise(Peak to Peak) Temperature Coefficient Nil But,Output protected to short circuit conditions Io=Full Load to Half Load, Vin=100VAC Io=Full Load, Vin=110VAC Io=Full Load, Vin=100VAC Full Load, Vin=90VAC Io=Full Load, Vin=240VAC All output Thold Hold-Up Time Ilk Safety Ground Leakage Current 0.5 0.75 Environmental : S ym. Toper Tstg Hr Pd P arameter Operating Temperature Storage Temperature Relative Humidity Te s t Conditions M in. T yp. M ax. 0 -40 70 85 95 U nit C C % No-Condensing 5 Derate linearly from 100% load at 40 C to 50% load at 70 C SPU12A SERIES 15W Wall Mount Switching Power Supplies For I.T .E. Safety Specifications: Sym. Vps Ri Parameter Dielectric Withstanding Voltage for Primary to secondary Isolation Resistance Te s t Conditions Primary to secondary Test Voltage=500VDC Vin=220VAC Vin=110VAC Min. Typ . M ax. 4242 50 B B U nit VDC M CLASS CLASS CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Output Voltage And Current Rating Chart ( Single Output ) : Model Number SPU12A-101 SPU12A-102 SPU12A-103 SPU12A-104 SPU12A-105 SPU12A-106 SPU12A-107 SPU12A-108 SPU12A-109 SPU12A-110 SPU12A-111 Output Voltage 3~ 5~ 6~ 5 VDC 6 VDC 8 VDC Output Current 3.30 ~ 2.00 A 2.00 ~ 1.66 A 1.66 ~ 1.25 A 1.50 ~ 1.09 A 1.36 ~ 1.15 A 1.15 ~ 0.93 A 0.93 ~ 0.71 A 0.71 ~ 0.55 A 0.59 ~ 0.48 A 0.45 ~ 0.37 A 0.37 ~ 0.30 A Total Regulation 7% 5% 5% 5% 5% 5% 3% 3% 3% 3% 3% Maximum Output Power 10W 10W 10W 12W 15W 15W 15W 15W 16W 15W 15W 8 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Mark " " means " PSE approval " Mechanical Specifications:( USA Type) N ote: 1. Dimensions are shown in mm. 2. Weight: 115gs approx. 3. Optional output connector: See page Appendix. ( OPTIONAL)