SPU50-9

SPU50 SERIES 60W Desk Top Switching Power Supplies For I.T .E. Description: The SPU50 series of AC/DC switching mode power supplies provide 60 Watts of continuous output power. All supplies are UL 94V-0 compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL, C-UL, TUV and CE requirements. All units are 100% burned in and tested. Features: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Output Voltage Available From 5VDC Thru 50VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Single Output Splash proof Class I Insulation Two years warranty Safety Approvals : Electrical Characteristics: Sym. Vin Fin Wo Vo Io Iil Iih Irl Irh Eff CB Test Conditions Min. 90 47 Vin=90 to 264VAC 0 Parameter Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) Low Line Inrush Current High Line Inrush Current Efficiency Typ. Max. 264 63 60 Unit VAC Hz W V A A A A A % % % % % mS mS See rating chart See rating chart Io=Full load, Vin=115VAC Io=Full load, Vin=230 VAC Io=Full load, 25°c, Cool start, Vin=115VAC Io=Full load, 25°c, Cool start, Vin=230VAC Io=Full Load, Vin=230VAC Io=Full Load Vin=230VAC 112 110 Io=Full Load to Half Load,Vin=100VAC Io=Full Load, Vin=100VAC Io=Full Load, Vin=100VAC Full Load, Vin=90VAC Io=Full Load, Vin=240VAC All output -0.04 16 0.3 1 0.5 0.5 2 1 0.75 0.04 12 26 75 83 0.5 3 1.6 1.0 15 30 88 1 5 132 150 4 REG-i Line Regulation REG-o Load Regulation OVP OCP Ttr Over Voltage Protection Over Current Protection Transient Response Thold Hold-Up Time Ts Vrn Ilk Tc Start Up Time Ripple & Noise (Pe ak to Peak) Safety Groun d Leakage Current Temperature Coefficient S % mA %/°c Environmental : Sym. Toper Tstg Hr Pd Parameter Operating Temperature Storage Temperature Relative Humidity Test Conditions Min. 0 -40 5 Typ. Max. 70 85 95 Unit °c °c % Derate linearly from 100% load at 40°c to 50% load at 70°c SPU50 SERIES 60W Desk Top Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ri Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to ground Isolation Resistance Test Conditions Primary to secondary Primary to ground Test Voltage = 500VDC Vin=220VAC Vin=110VAC Min. Typ. Max. 4242 2121 Unit VDC VDC 50 B B MW CLASS CLASS CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Output Voltage And Current Rating Chart ( Single Output ) : Model Number SPU50-1 SPU50-1-1 SPU50-2 SPU50-3 SPU50-4 SPU50-5 SPU50-6 SPU50-7 SPU50-8 SPU50-9 Output Voltage 05 ~ 06 VDC 06 ~ 09 VDC 09 ~ 11 VDC 11 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC Output Current 10.0 ~ 8.30 A 9.10 ~ 6.11 A 6.50 ~ 5.31 A 5.45 ~ 4.61 A 4.61 ~ 3.75 A 3.75 ~ 2.86 A 2.86 ~ 2.22 A 2.22 ~ 1.82 A 1.82 ~ 1.50 A 1.50 ~ 1.20 A Total Regulation 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Maximum Output Power 50W 55W 58.5W 60W 60W 60W 60W 60W 60W 60W Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 520gs approx. 3. Optional output connector: See page Appendix.