CA74S15-40

CA SERIES 25 TO 40 WATTS - CA SERIES Ultra Wide Input Voltage Range, Low Profile 25 TO 40 WATTS FEATURES • Ultra-Wide Input Voltage Range (4:1) • LC Input Filter for Low Reflected Ripple Current • Regulated Outputs • Thermal Shutdown with Auto-Recovery • Current Limiting Short Circuit Protection • 500VDC min. I/O Isolation • Industry Standard Package and Pin-Out • Industrial temperature grade also available THE CA SERIES FROM WALL INDUSTRIES The CA Series of single, dual and triple output DC/DC converters performs over an ultra-wide input voltage range (4:1), providing indefinite short circuit and overvoltage protection. Without a heatsink, the CA Series’ design technology allows for up to 40 watts output power from a 3.0 x 3.0 x 0.40” case. These current mode control forward converters are designed for improved transient response and reduced stress on switching components. SPECIFICATIONS: CA SERIES All specifications apply @ +25 C ambient unless otherwise Efficiency...........................................................80% typical noted. .............5VDC in................................................75% typical INPUT SPECIFICATIONS Isolation Voltage (input to output)...................500VDC min. Input Voltages......................4.5-9,9-36, 18-75, 55-110VDC Isolation Resistance (input to output)...............500MOhms Nominal Input...........................................5, 24, 48, 74VDC Switching Frequency...................................250kHz(typical) Input Filter......................................................LC input filter Remote On/Off Control........................Open Collector TTL ENVIRONMENTAL SPECIFICATIONS Operating Temperature (ambient).......-25 to 85%°C (case) OUTPUT SPECIFICATIONS Storage Temperature.....................................-55 to +100°C Output Current......................................................see table Temperature Coefficient.........................0.02% per °C max. Voltage Tolerance....................±1% primary, ±2% auxiliary Humidity (non-condensing).......................20% to 95% R.H. Output Trim (external).........................±10% (primary only) Line Regulation...........................................................0.5% PHYSICAL SPECIFICATIONS Load Regulation..........................±1% singles (see note 5) Shielding...............................................................Six-sided Weight..........................................................approx. 4.0 oz. Ripple/Noise (20MHz BW)..................................75mV p-p Case Material.......................................Black coated metal, Transient Response............