LANEW533R3

LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range FEATURES ● Low Ripple & Noise ● 3 Watts Output Power ● Single and Dual Output ● External ON/OFF Control ● RoHS Directive Compliant ● 2:1 Wide Input Voltage Range ● UL94-V0 Case Potting Materials ● Continuous Short Circuit Protection ● Input to Output Isolation up to 1KVDC ● SIP Package: 0.86 x 0.36 x 0.44 Inches SPECIFICATIONS: LANEW3 Series UL TUV CB CE MARK (Pending) All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS 5V nominal input 12V nominal input Input Voltage Range 24V nominal input 48V nominal input Input Current Input Filter Input Voltage Variation Input Surge Voltage (100ms max) dv/dt 5V nominal input 12V nominal input 24V nominal input 48V nominal input 5V nominal input 12V nominal input 24V nominal input 48V nominal input Power Up Remote ON/OFF DC-DC ON DC-DC OFF Remote OFF Input Current (nominal input) Application Circuit Remote ON/OFF o Input Reflected Ripple Current Start Up Time (Nominal Vin and constant resistive Load) 4.5 – 9 VDC 9 – 18 VDC 18 – 36 VDC 36 – 75 VDC See Table Capacitor Type 5V/ms, max (Complies with ETS300 132 part 4.4) 15 VDC 36 VDC 50 VDC 100 VDC 400mAp-p 150mAp-p 380mVp-p 170mVp-p 1ms typ 1ms typ Open or high impedance Control pin applied current 4 ~ 8mA max (via 1KΩ) 1mA max OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy (Full load and nominal Vin) Line Regulation (Low line to high line at full load) Load Regulation Cross Regulation (Dual) Minimum Load (See Note 3) Single Output (min. load to 100% load) Dual Output (balanced on all outputs) Asymmetrical load 25% / 100% FL See Table ±1% ±0.2% ±0.5% ±1% ±5% See Table Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range SPECIFICATIONS (CONTINUED) OUTPUT SPECIFICATIONS (CONTINUED) Output Power Output Current Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time Temperature Coefficient PROTECTION Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (input to output) Insulation Resistance Isolation Capacitance ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Relative Humidity Thermal Shock Vibration MTBF (see Note 1) PHYSICAL SPECIFICATIONS Weight Dimensions Case Material Base Material Potting Material SAFETY & EMC Safety Standard Pending 5V nominal input 12V nominal input 24V nominal input 48V nominal input 100µF & 10µF 100µF & 10µF 10µF & 120µF 10µF & 120µF Bellcore TR-NWT-000332 MIL-STD-217F 3 Watts max. See Table 75mVp-p 500µs typ. ±0.1% / °C max. Continuous, automatic recovery See Table 100KHz, min. 1600VDC, min. 10GΩ min. 1000pF max. -40°C ~ +71°C (without derating) +71°C ~+100°C (with derating) -55°C to +125°C 5% to 95% RH MIL-STD-810D 10-55Hz, 10G, 30 minutes along X, Y, and Z axis 4,386,000 Hours 2,401,000 Hours 4.8 grams (0.17oz) 0.86 x 0.36 x 0.44 inches (21.8 x 9.2 x 11.1 mm) Non-conductive black plastic None Silicon (UL94-V0) IEC60950-1, UL60950-1, EN60950-1 Meet EN55022 classes B recommend circuit with an external L-C filter at input 25% load step change Full load to minimum load EMC External Circuit EMC Characteristics (See Note 2) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range OUTPUT VOLTAGE / CURRENT RATING CHART Model Number LANEW533R3 LANEW505R3 LANEW509R3 LANEW512R3 LANEW515R3 LANEW505RD3 LANEW512RD3 LANEW515RD3 LANEW1233R3 LANEW1205R3 LANEW1209R3 LANEW1212R3 LANEW1215R3 LANEW1205RD3 LANEW1212RD3 LANEW1215RD3 LANEW2433R3 LANEW2405R3 LANEW2409R3 LANEW2412R3 LANEW2415R3 LANEW2405RD3 LANEW2412RD3 LANEW2415RD3 LANEW4833R3 LANEW4805R3 LANEW4809R3 LANEW4812R3 LANEW4815R3 LANEW4805RD3 LANEW4812RD3 LANEW4815RD3 Input Range Output Voltage 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output Current Min. load(3) Full load 35mA 700mA 30mA 600mA 20mA 333mA 17mA 250mA 14mA 200mA ±15mA ±300mA ±10mA ±125mA ±10mA ±100mA 35mA 700mA 30mA 600mA 20mA 333mA 17mA 250mA 14mA 200mA ±15mA ±300mA ±10mA ±125mA ±10mA ±100mA 35mA 700mA 30mA 600mA 20mA 333mA 17mA 250mA 14mA 200mA ±15mA ±300mA ±10mA ±125mA ±10mA ±100mA 35mA 700mA 30mA 600mA 20mA 333mA 17mA 250mA 14mA 200mA ±15mA ±300mA ±10mA ±125mA ±10mA ±100mA 5 VDC (4.5 – 9 VDC) 12 VDC (9 – 18 VDC) 24 VDC (18 – 36 VDC) 48 VDC (36 – 75 VDC) (7) Input Current (6) Capacitor (4) (5) Efficiency Load max No load Full load 113mA 670mA 73% 1760uF 75mA 822mA 77% 1000uF 83mA 811mA 78% 470uF 83mA 800mA 79% 170uF 53mA 790mA 80% 110uF 45mA 822mA 77% ±470uF 135mA 800mA 79% ±100uF 120mA 790mA 80% ±47uF 45mA 275mA 74% 1760uF 45mA 338mA 78% 1000uF 45mA 333mA 79% 470uF 45mA 329mA 80% 170uF 53mA 325mA 81% 110uF 75mA 329mA 80% ±470uF 60mA 325mA 81% ±100uF 60mA 325mA 81% ±47uF 23mA 138mA 74% 1760uF 10mA 169mA 78% 1000uF 23mA 167mA 79% 470uF 26mA 164mA 80% 170uF 20mA 162mA 81% 110uF 20mA 164mA 80% ±470uF 24mA 162mA 81% ±100uF 24mA 162mA 81% ±47uF 11mA 69mA 74% 1760uF 12mA 84mA 78% 1000uF 8mA 83mA 79% 470uF 8mA 82mA 80% 170uF 18mA 81mA 81% 110uF 12mA 82mA 80% ±470uF 12mA 81mA 81% ±100uF 15mA 81mA 81% ±47uF NOTES: 1. BELLCORE TR-NWT-000332. Case: 50% Stress, Temperature at 40ºC (Ground fixed and controlled environment). MIL-STD-217F Notice2 @ Ta = 25°C, Full Load (Ground fixed and controlled environment). 2. The LANEW3 Series requires an external filter to meet EN55022 Class B. 3. The LANEW3 Series requires a minimum load at the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specifications. 4. Typical value at nominal input voltage. 5. Maximum value at nominal input voltage and full load. 6. Typical value at nominal input voltage and full load. 7. Test by minimum Vin and constant resistive load. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANEW3 Series 3 Watt DC/DC Converter Single and Dual Outputs 2:1 Wide Input Voltage Range DERATING CURVES MECHANICAL DRAWING Pin 1 2 3 5 6 7 8 PIN CONNECTION Single Output Dual Output -INPUT -INPUT +INPUT +INPUT CTRL CTRL NC NC +OUTPUT +OUTPUT -OUTPUT COMMON NC -OUTPUT Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797