W3DG6433V10D2

White Electronic Designs 256MB- 32Mx64 SDRAM UNBUFFERED FEATURES PC100 and PC133 compatible Burst Mode Operation Auto and Self Refresh capability LVTTL compatible inputs and outputs Serial Presence Detect with EEPROM Fully synchronous: All signals are registered on the positive edge of the system clock Programmable Burst Lengths: 1, 2, 4, 8 or Full Page 3.3 V ± 0.3V Power Supply 168 Pin DIMM JEDEC W3DG6433V-D2 DESCRIPTION The W3DG6433V is a 32Mx64 synchronous DRAM module which consists of four 32Mx16 SDRAM components in TSOP 11 package and one 2K EEPROM in an 8 pin TSSOP package for Serial Presence Detect which are mounted on a 168 Pin DIMM multilayer FR4 Substrate. PIN CONFIGURATIONS (FRONT SIDE/BACK SIDE) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Front VSS DQ0 DQ1 DQ2 DQ3 VCC DQ4 DQ5 DQ6 DQ7 DQ8 VSS DQ9 DQ10 DQ11 DQ12 DQ13 VCC DQ14 DQ15 NC NC VSS NC NC VCC WE# DQM0 Pin 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 Front DQM1 CS0# DNU VSS A0 A2 A4 A6 A8 A10/AP BA1 VCC VCC CK0 VSS DNU CS2# DQM2 DQM3 DNU VCC NC NC NC NC VSS DQ16 DQ17 Pin 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 Front DQ18 DQ19 VCC DQ20 NC NC NC VSS DQ21 DQ22 DQ23 VSS DQ24 DQ25 DQ26 DQ27 VCC DQ28 DQ29 DQ30 DQ31 VSS CK2 NC *WP **SDA **SCL VCC Pin 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 Back VSS DQ32 DQ33 DQ34 DQ35 VCC DQ36 DQ37 DQ38 DQ39 DQ40 VSS DQ41 DQ42 DQ43 DQ44 DQ45 VCC DQ46 DQ47 NC NC VSS NC NC VCC CAS# DQM4 Pin 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 Back DQM5 CS1# RAS# VSS A1 A3 A5 A7 A9 BA0 A11 VCC NC A12 VSS CKE0 NC DQM6 DQM7 NC VCC NC NC NC NC VSS DQ48 DQ49 Pin 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 Back DQ50 DQ51 VCC DQ52 NC NC DNU VSS DQ53 DQ54 DQ55 VSS DQ56 DQ57 DQ58 DQ59 VCC DQ60 DQ61 DQ62 DQ63 VSS NC NC **SA0 **SA1 **SA2 VCC PIN NAMES A0 – A12 BA0-1 DQ0-63 CK0,CK2 CKE0 RAS# CAS# WE# DQM0-7# VCC VSS SDA SCL DNU NC Address input (Multiplexed) Select Bank Data Input/Output Clock input Clock Enable input Row Address Strobe Column Address Strobe Write Enable DQM Power Supply (3.3V) Ground Serial data I/O Serial clock Do not use No Connect CS0#,CS2# Chip select Input *WP (write protect) option is available on Pin 81, see ordering information on page 5. **These pins should be NC in the system which does not support SPD. White Electronic Designs Corp. reserves the right to change products or specifications without notice. June, 2003 Rev.1 1 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs FUNCTIONAL BLOCK DIAGRAM W3DG6433V-D2 CKE0 WE#,RAS#,CAS# BA0,BA1,A0-A12 CK0,CK2 CS0# DQ0-7 LDQM DQ0-7 DQMB0 DQ0-7 LDQM DQ32-39 DQMB4 U0 DQ8-15 UDQM CS2# DQ0-7 LDQM DQ16-23 DQMB2 DQ8-15 DQMB1 U2 DQ8-15 UDQM DQ40-47 DQMB5 DQ0-7 LDQM DQ48-55 DQMB6 U1 DQ8-15 UDQM DQ24-31 DQMB3 U3 DQ8-15 UDQM DQ56-63 DQMB7 SCL U5 SERIAL PD EEPROM SDA White Electronic Designs Corp. reserves the right to change products or specifications without notice. June, 2003 Rev.1 2 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs ABSOLUTE MAXIMUM RATINGS Parameter Voltage on any pin relative to VSS Voltage on VCC supply relative to VSS Storage Temperature Power Dissipation Short Circuit Current Note: W3DG6433V-D2 Symbol VIN, VOUT VCC, VCCQ TSTG PD IOS Value -1.0 ~ 4.6 -1.0 ~ 4.6 -55 ~ +150 4 50 Units V V °C W mA Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted to recommended operating condition. Exposure to higher than recommended voltage for extended periods of time could affect device reliability. RECOMMENDED DC OPERATING CONDITIONS (Voltage Referenced to: VSS = 0V, 0°C ≤ TA ≤ 70°C) Parameter Supply Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Input Leakage Current Note: Symbol VCC VIH VIL VOH VOL ILI Min 3.0 2.0 -0.3 2.4 — -10 Typ 3.3 3.0 — — — — Max 3.6 VCCQ+0.3 0.8 — 0.4 10 Unit V V V V V µA Note 1 2 IOH= -2mA IOL= -2mA 3 1. VIH (max)= 5.6V AC. The overshoot voltage duration is ≤ 3ns. 2. VIL (min)= -2.0V AC. The undershoot voltage duration is ≤ 3ns. 3. Any input 0V ≤ VIN ≤ VCCQ Input leakage currents include Hi-Z output leakage for all bi-directional buffers with Tri-State outputs. CAPACITANCE (TA = 23°C, F = 1MHZ, VCC = 3.3V, VREF = 1.4V 6200MV) Parameter Input Capacitance (A0-A12) Input Capacitance (RAS#,CAS#,WE#) Input Capacitance (CKE0) Input Capacitance (CK0,CK2) Input Capacitance (CS0#,CS2#) Input Capacitance (DQM0-DQM7) Input Capacitance (BA0-BA1) Data input/output capacitance (DQ0-DQ63) Symbol CIN1 CIN2 CIN3 CIN4 CIN5 CIN6 CIN7 COUT Max 25 25 25 13 15 10 25 12 Unit pF pF pF pF pF pF pF pF White Electronic Designs Corp. reserves the right to change products or specifications without notice. June, 2003 Rev.1 3 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs OPERATING CURRENT CHARACTERISTICS (VCC = 3.3V, 0°C ≤ TA ≤ 70°C) W3DG6433V-D2 Version Parameter Symbol Conditions 133 Operating Current (One bank active) Precharge Standby Current in Power Down Mode ICC1 ICC2P ICC2PS ICC2N Precharge Standby Current in Non-Power Down Mode ICC2NS Active standby current in power-down mode ICC3P ICC3PS ICC3N Active standby current in non power-down mode ICC3NS Operating current (Burst mode) Burst Length = 1 tRC ≥ tRC(min) IOL = 0mA CKE ≤ VIL(max), tCC = 10ns CKE & CK ≤ VIL(max), tCC = ∞ CKE ≥ VIH(min), CS ≥ VIH(min), tCC = 10ns Input signals are charged one time during 20 CKE ≥ VIH(min), CK ≤ VIL(max), tCC = ∞ Input signls are stable CKE ≥ VIL(max), tCC = 10ns CKE & CK ≤ VIL(max), tCC = ∞ CKE ≥ VIH(min), CS# ≥ VIH(min), tCC = 10ns Input signals are changed one time during 20ns CKE ≥ VIH(min), CK ≤ VIL(max), tCC = ∞ input signals are stable Io = mA Page burst 4 Banks activated tCCD = 2CK tRC ≥ tRC(min) CKE ≤ 0.2V 600 10 mA 10 70 mA 60 25 mA 25 140 mA 120 100 560 mA 1 Units Note ICC4 720 580 mA 1 Refresh current Self refresh current ICC5 ICC6 840 20 800 mA mA 2 Notes: 1. Measured with outputs open. 2. Refresh period is 64ms. 3. Unless otherwise noticed, input swing level is CMOS (VIH/VIL = VCCQ/VSSQ) White Electronic Designs Corp. reserves the right to change products or specifications without notice. June, 2003 Rev.1 4 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs ORDERING INFORMATION Part Number W3DG6433V10D2 W3DG6433V75D2 Speed 100MHz 133MHz CAS Latency CL=2 CL=3 Part Number WED3DG6333V10D2 WED3DG6333V75D2 W3DG6433V-D2 Speed 100MHz 133MHz CAS Latency CL=2 CL=3 Note: Available with WP (write protection) on Pin 81. PACKAGE DIMENSIONS .150 MAX. 5.255 MAX. .125 (2X) 278 1.000 .700 MAX. .157 (2X) .450 .614 .350 .250 1.450 .250 2.275 4.550 2.150 .157 MIN. .050 .004 ALL DIMENSIONS ARE IN INCHES White Electronic Designs Corp. reserves the right to change products or specifications without notice. June, 2003 Rev.1 5 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com