WV3EG264M64EFSU335D4-SG

White Electronic Designs WV3EG265M64EFSU-D4 1GB – 2x64Mx64 DDR SDRAM UNBUFFERED, w/PLL FEATURES Double-data-rate architecture PC2700 and PC2100 Bi-directional data strobes (DQS) Differential clock inputs (CK & CK#) Programmable Read Latency 2, 2.5 (clock) Programmable Burst Length (2,4,8) Programmable Burst type (sequential & interleave) Auto and self refresh, (8K/64ms refresh) Serial presence detect with EEPROM Power supply: VCC/VCCQ: 2.5V ± 0.2V Dual Rank 200 pin SO-DIMM package • Package height options: D4: 31.75 mm (1.25”) * This product is subject to change without notice. DESCRIPTION The WV3EG265M64EFSU is a 2x64Mx64 Double Data Rate SDRAM memory module based on 512Mb DDR SDRAM component. The module consists of sixteen 64Mx8 bit with 4 banks DDR SDRAMs in FBGA packages mounted on a 200 pin substrate. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges and Burst Lengths allow the same device to be useful for a variety of high bandwidth, high performance memory system applications. NOTE: Consult factory for availability of: • RoHS compliant products • Vendor source control options • Industrial temperature option OPERATING FREQUENCIES DDR333 @CL=2.5 Clock Speed CL-tRCD-tRP 166MHz 2.5-3-3 DDR266 @CL=2 133MHz 2-2-2 DDR266 @CL=2.5 133MHz 2.5-3-3 October 2005 Rev. 1 1 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs PIN CONFIGURATION PIN# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 SYMBOL PIN# VREF 51 VREF 52 53 VSS VSS 54 DQ0 55 DQ4 56 DQ1 57 DQ5 58 59 VCC VCC 60 DQS0 61 DM0 62 DQ2 63 DQ6 64 65 VSS VSS 66 DQ3 67 DQ7 68 DQ8 69 DQ12 70 VCC 71 72 VCC DQ9 73 DQ13 74 DQS1 75 DM1 76 VSS 77 78 VSS DQ10 79 DQ14 80 DQ11 81 DQ15 82 VCC 83 VCC 84 CK0 85 VCC 86 CK0# 87 VSS 88 VSS 89 VSS 90 DQ16 91 DQ20 92 DQ17 93 DQ21 94 95 VCC VCC 96 DQS2 97 DM2 98 DQ18 99 DQ22 100 SYMBOL PIN# VSS 101 VSS 102 DQ19 103 DQ23 104 DQ24 105 DQ28 106 VCC 107 VCC 108 DQ25 109 DQ29 110 DQS3 111 DM3 112 VSS 113 VSS 114 DQ26 115 DQ30 116 DQ27 117 DQ31 118 VCC 119 VCC 120 NC 121 NC 122 NC 123 NC 124 VSS 125 126 VSS NC 127 NC 128 NC 129 NC 130 VCC 131 VCC 132 NC 133 NC 134 NC 135 NC 136 VSS 137 VSS 138 NC 139 VSS 140 NC 141 VCC 142 VCC 143 VCC 144 CKE1 145 CKE0 146 NC 147 NC 148 A12 149 A11 150 SYMBOL PIN# A9 151 A8 152 VSS 153 VSS 154 A7 155 A6 156 A5 157 A4 158 A3 159 A2 160 A1 161 A0 162 VCC 163 VCC 164 A10 165 BA1 166 BA0 167 RAS# 168 WE# 169 CAS# 170 CS0# 171 CS1# 172 NC 173 NC 174 VSS 175 VSS 176 DQ32 177 DQ36 178 DQ33 179 DQ37 180 VCC 181 VCC 182 DQS4 183 DM4 184 DQ34 185 DQ38 186 VSS 187 VSS 188 DQ35 189 DQ39 190 DQ40 191 DQ44 192 VCC 193 VCC 194 DQ41 195 DQ45 196 DQS5 197 DM5 198 VSS 199 VSS 200 SYMBOL DQ42 DQ46 DQ43 DQ47 VCC VCC VCC NC VSS NC VSS VSS DQ48 DQ52 DQ49 DQ53 VCC VCC DQS6 DM6 DQ50 DQ54 VSS VSS DQ51 DQ55 DQ56 DQ60 VCC VCC DQ57 DQ61 DQS7 DM7 VSS VSS DQ58 DQ62 DQ59 DQ63 VCC VCC SDA SA0 SCL SA1 VCCSPD SA2 NC NC WV3EG265M64EFSU-D4 PIN DESCRIPTION A0-A12 BA0-BA1 DQ0-DQ63 DQS0-DQS7 CK0, CK0# CKE0, CKE1 CS0#, CS1# RAS# CAS# WE# DM0-DM7 VCC VCCQ VSS VREF VCCSPD SDA SCL SA0-SA2 NC Address input (Multiplexed) Bank Select Address Data Input/Output Data Strobe Input/Output Clock Input Clock Enable input Chip Select Input Row Address Strobe Column Address Strobe Write Enable Data-In Mask Power Supply (2.5V) Power Supply for DQS (2.5V) Ground Power Supply for Reference Serial EEPROM Power Supply (2.3V to 3.6V) Serial data I/O Serial clock Address in EEPROM No Connect October 2005 Rev. 1 2 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs WV3EG265M64EFSU-D4 FUNCTIONAL BLOCK DIAGRAM CS1# CS0# DQS0 DM0 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS4 DM4 DQ32 DQ33 DQ34 DQ35 DQ36 DQ37 DQ38 DQ39 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS1 DM1 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS5 DM5 DQ40 DQ41 DQ42 DQ43 DQ44 DQ45 DQ46 DQ47 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS2 DM2 DQ16 DQ17 DQ18 DQ19 DQ20 DQ21 DQ22 DQ23 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS6 DM6 DQ48 DQ49 DQ50 DQ51 DQ52 DQ53 DQ54 DQ55 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS3 DM3 DQ24 DQ25 DQ26 DQ27 DQ28 DQ29 DQ30 DQ31 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# DQS7 DM7 DQ56 DQ57 DQ58 DQ59 DQ60 DQ61 DQ62 DQ63 DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S0# DQS DM I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 I/O 7 S1# BA0-BA1 A0-A12 RAS# CAS# WE# CS1# CS0# BA0-BA1: DDR SDRAMs A0-A12: DDR SDRAMs RAS#: DDR SDRAMs CAS#: DDR SDRAMs WE#: DDR SDRAMs CS1#: DDR SDRAMs CS0#: DDR SDRAMs SERIAL PD CK0 CK0# PLL DDR SDRAMs DDR SDRAMs DDR SDRAMs DDR SDRAMs VCCSPD VCC/VCCQ VREF VSS SPD DDR SDRAMs DDR SDRAMs DDR SDRAMs SCL WP A0 SA0 A1 SA1 A2 SA2 SDA NOTE: All datalines are terminated through a 22 ohm series resistor October 2005 Rev. 1 3 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs Parameter Voltage on any pin relative to VSS Voltage on VCC supply relative to VSS Voltage on VCCQ supply relative to VSS Storage Temperature Operating Temperature Power Dissipation Short Circuit Current WV3EG265M64EFSU-D4 ABSOLUTE MAXIMUM RATINGS Symbol VIN, VOUT VCC VCCQ TSTG TA PD IOS Value -0.5 to 3.3 -1.0 to 3.6 -1.0 to 3.6 -55 to +150 0 to +70 16 50 Units V V V °C °C W mA Note: Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to recommended operating condition. Exposure to higher than recommended voltage for extended periods of time could affect device reliability. DC CHARACTERISTICS 0°C ≤ TA ≤ 70°C, VCC = 2.5V ± 0.2V Symbol VCC VCCQ VREF VTT VIH(DC) VIL(DC) VIN(DC) VID(DC) VIX(DC) Addr, CAS#, RAS#, WE# CS#, CKE CK, CK# DM Parameter Supply voltage DDR266/DDR333 (nominal VCC of 2.5V) I/O Supply voltage DDR266/DDR333 (nominal VCC of 2.5V) I/O Reference voltage I/O Termination voltage Input logic high voltage Input logic low voltage Input voltage level, CK and CK# Input differential voltage, CK and CK# Input crossing point voltage, CK and CK# Min 2.3 2.3 0.49*VCCQ VREF-0.04 VREF+0.15 -0.3 -0.3 0.3 0.3 -32 -16 -10 -4 -10 -16.8 16.8 -9 9 Max 2.7 2.7 0.51*VCCQ VREF+0.04 VCCQ+0.30 VREF-0.15 VCCQ+0.30 VCCQ+0.60 VCCQ+0.60 32 16 -10 4 10 — — — — Unit V V V V V V V V uA uA uA uA uA mA mA mA mA Note 1 2 3 Input leakage current II Output leakage current Output high current (normal strengh); VOUT = V +0.84V Output high current (normal strengh); VOUT = VTT -0.84V Output high current (half strengh); VOUT = VTT +0.45V Output high current (half strengh); VOUT = VTT -0.45V IOZ IOH IOL IOH IOL NOTES: 1. VREF is expected to be equal to 0.5*VCCQ of the transmitting device, and to track variations in the DC level of the same. Peak to peak noise on VREF may not exceed ±2% of the DC value 2. VTT is not applied directly to the device. VTT is a system supply for signal termination resistors, is expected to be set equal to VREF, and must track variations in the DC level of VREF 3. VID is the magnitude of the difference between the input level on CK and the input level on CK#. CAPACITANCE VCC = 2.5V, VCCQ = 2.5V, TA = 25°C, f = 1MHz Parameter Input Capacitance (A0-A12, BA0-BA1, RAS#, CAS#, WE#) Input Capacitance (CKE0, CKE1) Input Capacitance (CS0#, CS1#) Input Capacitance (CLK0, CLK0#) Input Capacitance (DM0-DM7) Data and DQS input/output capacitance (DQ0-DQ63) October 2005 Rev. 1 Symbol CIN1 CIN2 CIN3 CIN4 CIN5 COUT1 Min 28 16 16 6 11 11 Max 44 24 24 7.5 13 13 Unit pF pF pF pF pF pF 4 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs WV3EG265M64EFSU-D4 IDD SPECIFICATIONS AND TEST CONDITIONS Recommended operating conditions, 0°c ≤ TA ≤ 70°C, VCCQ = 2.5V ± 0.2V, VCC = 2.5V ± 0.2V Parameter Symbol Conditions One device bank active; Active-Precharge; tRC = tRC(MIN); tCK = tCK(MIN); DQ, DM and DQS inputs change once per clock cycle; Address and control inputs change once every two clock cycles One device bank; Active-Read-Precharge; BL = 4; tRC = tRC(MIN); tCK = tCK(MIN); IOUT = 0mA; Address and control inputs change once per clock cycle All device banks are idle; Power-down mode; tCK = tCK(MIN); CKE = LOW CS# = HIGH; All device banks are idle; tCK = tCK(MIN); CKE = HIGH; Address and other control inputs changing once per clock cycle. VIN = VREF for DQ, DQS and DM One device bank active; Power-down mode; tCK = tCK(MIN); CKE = LOW CS# = HIGH; CKE = HIGH; One device bank active; tRC = tRAS(MAX); tCK = tCK(MIN); DQ, DM and DQS inputs change twice per clock cycle; Address and other control inputs changing once per clock cycle Burst = 2; Reads; Continuous burst; One device bank active; Address and other control inputs changing once per clock cycle; tCK = tCK(MIN); IOUT = 0mA Burst = 2; Writes; Continuous burst; One device bank active; Address and other control inputs changing once per clock cycle; tCK = tCK(MIN); DQ, DM and DQS inputs change twice per clock cycle tRC = tRFC(MIN) CKE < 0.2V Four device bank interleaving Reads Burst = 4 with auto precharge; tRC = tRFC(MIN); tCK = tCK(MIN); Address and control inputs change only during Active READ, or WRITE commands DDR333 @ CL = 2.5 DDR266 @ CL = 2 DDR266 @ CL = 2.5 Unit Operating current IDD0* 1360 1240 1240 mA Operating current Percharge powerdown standby current Idle standby current Active power-down standby current Active standby current IDD1* 1600 1480 1480 mA IDD2P** 360 360 360 mA IDD2F** 1000 920 920 mA IDD3P** 840 760 760 mA IDD3N** 1080 1000 1000 mA Operating current IDD4R* 1640 1480 1480 mA Operating current IDD4W* 1720 1400 1400 mA Auto refresh current Self refresh current Orerating current IDD5** IDD6** IDD7* 4920 360 3560 4760 360 3120 4760 360 3120 mA mA mA NOTE: IDD specification is based on Micron components. Other DRAM Manufacturers specification may be different. * Value calculated as one module rank in this operating condition and all other module ranks in IDD2P (CKE low) mode. ** Value calculated reflects all module ranks in this operating condition. AC OPERATING TEST CONDITIONS Parameter/Condition Input High (Logic 1) Voltage Input Low (Logic 0) Voltage Input Differential Voltage, CK and CK# inputs Input Crossing Point Voltage, CK and CK3 inputs Symbol VIH(AC) VIL(AC) VID(AC) VIX(AC) 0.7 0.5*VCCQ-0.2 Min VREF +0.31 VREF -0.31 VCCQ+0.6 0.5*VCCQ+0.2 Max Unit V V V V October 2005 Rev. 1 5 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs AC TIMING PARAMETERS 0 ≤ TA ≤ 70°C, VCC = 2.5V, VCCQ = 2.5V Parameter Row cycle time Refresh row cycletime Row active time RAS# to CAS# delay Row precharge time Row active to Rowactivedelay Write recovery time Last data into Read command Clock cycle time Clock high leve width Clock low level width DQS-out access time from CK/CK# Output data access time from CK/CK# Data strobe edge to ouput data edge Read Preamble Read Postamble CK to valid DQS-in DQS-in setup time DQS-in hold time DQS falling edge to CK rising-setup time DQS falling edge from CK rising-hold time DQS-in high level width DQS-in low level width Address and Control Input setup time (fast) Address and Control Input hold time (fast) Address and Control Input setup time (slow) Address and Control Input hold time (slow) Data-out high impedence time from CK/CK# Data-out low impedence time from CK/CK# CL=2.0 CL=2.5 Symbol tRC tRFC tRAS tRCD tRP tRRD tWR tWTR tCK tCH tCL tDQSCK tAC tDQSQ tRPRE tRPST tDQSS tWPRES tWPRE tDSS tDSH tDQSH tDQSL tISF tISHF tISS tIHS tHZ tLZ 335 Min 60 72 42 15 15 12 15 1 7.5 6 0.45 0.55 -0.6 -0.7 — 0.9 0.4 0.75 0 0.25 0.2 0.2 0.35 0.35 0.75 0.75 0.8 0.8 -0.7 Max WV3EG265M64EFSU-D4 262 Min 65 75 40 20 20 15 15 1 7.5 7.5 0.45 0.55 -0.75 -0.75 — 0.9 0.4 0.75 0 0.25 0.2 0.2 0.35 0.35 0.9 0.9 1 1 -0.75 Max Min 65 75 40 20 20 15 15 1 10 7.5 0.45 0.55 -0.75 -0.75 — 0.9 0.4 0.75 0 0.25 0.2 0.2 0.35 0.35 0.9 0.9 1 1 -0.75 265 Max Unit ns ns ns ns ns ns ns ns ns ns tCK tCK ns ns ns tCK tCK tCK ns tCK tCK tCK tCK tCK ns ns ns ns ns ns 70K 120K 120K 13 13 0.55 0.55 +0.6 +0.7 0.45 1.1 0.6 1.25 13 13 0.55 0.55 +0.75 +0.75 0.5 1.1 0.6 1.25 13 13 0.55 0.55 +0.75 +0.75 0.5 1.1 0.6 1.25 +0.7 +0.75 +0.75 Note: AC Timing Parameters are based on Micron components. Other DRAM Manufacturers parameters may be different. October 2005 Rev. 1 6 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs 0 ≤ TA ≤ 70°C, VCC = 2.5V, VCCQ = 2.5V Parameter Mode register set cycle time DQ & DM setup time to DQS DQ & DM hold time to DQS Control & Address input pulse width DQ & DM input pulse width Exit self refresh to non-Read command Exit self refresh to read command Refresh interval time Output DQS valid window Clock half period Data hold skew factor DQS write postamble time Active to Read with Auto precharge command Auto precharge write recovery + Precharge time Symbol tMRD tDS tDH tIPW tDIPW tXSNR tXSRD tREFI tQH tHP tQHS tWPST tRAP tRAL 335 Min 10 0.45 0.4 2.2 1.75 75 200 tHP - tQHS tCLmin or tCHmin 0.4 15 (tWR/tCK) + (tRP/tCK) Max WV3EG265M64EFSU-D4 AC TIMING PARAMETERS (Continued) 262 Min 10 0.5 0.5 2.2 1.75 75 200 tHP - tQHS tCLmin or tCHmin 0.4 20 (tWR/tCK) + (tRP/tCK) Max Min 10 0.5 0.5 2.2 1.75 75 200 tHP - tQHS tCLmin or tCHmin 0.4 20 (tWR/tCK) + (tRP/tCK) 265 Max Unit ns ns ns ns ns ns tCK us ns ns ns ns ns tCK 7.8 — — 0.55 0.6 7.8 — — 0.75 0.6 7.8 — — 0.75 0.6 October 2005 Rev. 1 7 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs WV3EG265M64EFSU-D4 ORDERING INFORMATION FOR D4 Part Number WV3EG265M64EFSU335D4-x WV3EG265M64EFSU262D4-x WV3EG265M64EFSU265D4-x Speed 166MHz/333Mb/s 133MHz/266Mb/s 133MHz/266Mb/s CAS Latency 2.5 2 2.5 tRCD 3 2 3 tRP 3 2 3 Height* 31.75mm (1.25") 31.75mm (1.25") 31.75mm (1.25") NOTES: • Consult Factory for availability of RoHS compliant products. (G = RoHS Compliant) • Vendor specific part numbers are used to provide memory components source control. The place holder for this is shown as lower case “-x” in the part numbers above and is to be replaced with the respective vendors code. Consult factory for qualified sourcing options. (M = Micron, S = Samsung & consult factory for others) • Consult factory for availability of industrial temperature (-40°C to 85°C) option PACKAGE DIMENSIONS FOR D4 67.60 (2.661) 63.60 (2.504) Full R 2x 3.80 (0.150) MAX. 4.00 ±0.10 (0.158 ±0.039) 31.75 (1.25) 20 (0.787) 1 39 41 199 6.0 0.236 11.40 (0.449) 2.15 (0.085) 2.45 (0.098) 1.8 (0.071) 1.00 ±0.1 (0.04 ±0.0039) 4.20 (0.165) 2.40 (0.094) 47.40 (1.866) 2- 1.80 (0.071) 1.0 ± 0.1 (0.04 ± 0.0039) 0.60 (0.024) 0.45 ±0.03 (0.018 ±0.001) 0.25 (0.01) 2.55 Min (0.102 Min) 4.00 (0.158) MIN. 4.00 ±0.10 (0.158 ±0.039) Tolerances: ±0.15 (0.006) unless otherwise specified * ALL DIMENSIONS ARE IN MILLIMETERS AND (INCHES) October 2005 Rev. 1 8 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs WV3EG265M64EFSU-D4 PART NUMBERING GUIDE WV 3 E G 265M 64 E F S U xxx D4 -x G WEDC MEMORY DDR GOLD DEPTH (Dual Rank) (5 = PLL) BUS WIDTH x8 FBGA 2.5V UNBUFFERED SPEED (MHz) PACKAGE 200 PIN COMPONENT VENDOR NAME (M = Micron) (S = Samsung) G = RoHS COMPLIANT October 2005 Rev. 1 9 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com White Electronic Designs Document Title 1GB – 2x64Mx64 DDR SDRAM UNBUFFERED, w/PLL WV3EG265M64EFSU-D4 Revision History Rev # Rev 0 Rev 1 History Initial Release Moved from Preliminary to Final Release Date 8-05 10-05 Status Preliminary Final October 2005 Rev. 1 10 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com