0380420000

    Data sheet SAK 2.5/35 KRG Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com     Product image Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Version Order No. Type GTIN (EAN) Qty. Delivery status Available until Alternative product   SAK Series, Feed-through terminal, Rated crosssection: 2.5 mm², Screw connection, medium yellow 0380420000 SAK 2.5/35 KRG 4008190014360 100 pc(s). This article will no longer be available in the future. 2022-12-31 1020000000 Creation date September 28, 2021 7:20:23 PM CEST   Catalogue status 27.09.2021 / We reserve the right to make technical changes. 1     Data sheet SAK 2.5/35 KRG   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Dimensions and weights   Depth Height Width Net weight           Depth (inches) Height (inches) Width (inches)   1.575 inch 1.949 inch 0.24 inch   Operating temperature range -25 °C...55 °C -60 °C   Continuous operating temp., max. For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity 130 °C KrG V-0, 5VA     Colour   medium yellow KEMA97ATEX1798U 550 V 2 mm² 21 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXKEM06.0014U 21 A 550 V 2.5 mm²     Screw connection, for screwable crossconnection, One end without connector 1 2 No TS 35 No   End cover plate required           Number of levels Number of potentials per tier PE connection N-function PEN function Yes 1 1 No No No Yes right     Number of similar terminals Type of mounting 1 Snap-on 12400-129 600 V 26 AWG       Current size C (CSA) Wire cross section max. (CSA)   25 A 10 AWG 40 mm 49.5 mm 6.1 mm 10.4 g Temperatures   Storage temperature Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of potentials Number of clamping points per level Levels cross-connected internally Rail PE function   Additional technical data   Explosion-tested version Open sides   CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   Creation date September 28, 2021 7:20:23 PM CEST   Catalogue status 27.09.2021 / We reserve the right to make technical changes. 2     Data sheet SAK 2.5/35 KRG   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.13 mm² 4 mm² on side 2 0.6 Nm 1 0.5 mm² AWG 10 4 mm² 2.5 mm² 2.5 mm² 6 mm²                           Clamping range, max. 6 mm² Clamping screw M 2.5 Connection cross-section, stranded, min. 0.5 mm² Gauge to IEC 60947-1 A3 Stripping length 10 mm Tightening torque, min. 0.4 Nm Twin wire-end ferrules, max. 1.5 mm² Type of connection Screw connection Wire connection cross section AWG, min. AWG 26 Wire connection cross section, finely stranded, min. 0.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 0.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5 mm² Wire connection cross-section, solid core, min. 0.5 mm² General   Rail Wire connection cross section AWG, max.       Standards Wire connection cross section AWG, min. IEC 60947-7-1       800 V 32 A   Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Power loss in accordance with IEC 60947-7-x   E60693 22 AWG 22 AWG 600 V         Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Current size C (UR) 20 A   EC000897 EC000897 27-14-11-20 27-14-11-20         ETIM 7.0 ECLASS 9.0 ECLASS 10.0   TS 35 AWG 10 AWG 26 Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Pollution severity   2.5 mm² 24 A IEC 60947-7-1 8 kV 3   1.33 mΩ 0.77 W UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 6.0 ETIM 8.0 ECLASS 9.1 ECLASS 11.0   EC000897 27-14-11-20 27-14-11-20 Creation date September 28, 2021 7:20:23 PM CEST   Catalogue status 27.09.2021 / We reserve the right to make technical changes. 3     Data sheet SAK 2.5/35 KRG   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Approvals   Approvals ROHS UL File Number Search   Conform E60693 Downloads   Approval/Certificate/Document of Conformity Engineering Data User Documentation Catalogues   Attestation Of Conformity EAC certificate VDE Certificate Lloyds Register Certificate MARITREG Certificate Declaration of Conformity Declaration of Conformity all terminals EPLAN, WSCAD StorageConditionsTerminalBlocks Catalogues in PDF-format Creation date September 28, 2021 7:20:23 PM CEST   Catalogue status 27.09.2021 / We reserve the right to make technical changes. 4