0637120000

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Germin KrG | Special terminals SAKG | 50 mm² General ordering data Order No. Part designation Version EAN Qty. 0637120000 SAKG 32/35 I Special terminal, special connections, 50 mm², Screw connection, KrG, Medium yellow, TS 35 4008190111496 10 pc(s). Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version Medium yellow on side Yes No TS 35 KrG No 1 1 2 Open - 60 °C, + 130 °C SAK Series Screwed Snap-on 5VA Stud terminal / ZB CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 170 A AWG 1 AWG 2/0 Conductors for clamping (additional connection) Type of connection Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Flat spade connection 10 mm² 35 mm² Conductors for clamping (rated connection) Clamping range, min. 10 mm² -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Germin KrG | Special terminals SAKG | 50 mm² Conductors for clamping (rated connection) Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Tightening torque range Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. 70 mm² Screw connection screwed on side 1 26 mm M8 6.0...12 Nm B11 10 mm² 16 mm² 10 mm² 70 mm² 10 mm² 70 mm² 10 mm² 70 mm² AWG 3 AWG 2/0 26.67 mm² 67.44 mm² Dimensions Width Height of lowest version Length TS 32 offset TS 35 offset 32 mm 84.5 mm 87 mm 29.5 mm 43.5 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 50 mm² 1,000 V 8 kV 150 A IEC 60947-7-1 192 A 3 Stud connection Clamping range, max. Clamping range, min. 70 mm² 10 mm² UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 165 A AWG 6 AWG 3/0 -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Germin KrG | Special terminals SAKG | 50 mm² Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000897 EC000897 27-14-11-31 27-14-11-31 27-14-11-31 Similar products Order No. 0637320000 Part designation SAKG 32/35 II 0637420000 SAKG 32/35 II/GW 0637220000 SAKG 32/35 III Version Special terminal, special connections, 50 mm², Screw connection, KrG, Medium yellow, TS 35 Special terminal, special connections, 50 mm², Screw connection, KrG, Medium yellow, TS 35 Special terminal, special connections, 50 mm², Screw connection, KrG, Medium yellow, TS 35 -3-