1010500000

    Data sheet W-Series WPE 35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 35 1010500000 PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), green / yellow 4008190112806 25 pc(s). Creation date November 5, 2018 9:33:33 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail Net weight   16 mm 56 mm 62.5 mm 63 mm 80.2 g           Width (inches) Height (inches) Depth (inches) Weight   0.63 inch 2.205 inch 2.461 inch 82.84 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   green / yellow DEMKO14ATEX1338U 35 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 35 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Screw connection, With PE  connection, closed   5 Nm   1   2   No   TS 35   Yes Tightening torque (mounting screw) End cover plate required 1.2...2.4 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Additional technical data   Explosion-tested version Interlock Open sides   Yes for screw fixing closed       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 200039-1057876 12 AWG     Wire cross section max. (CSA)   2 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 5, 2018 9:33:33 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   6.5 x 1.2 mm 2.5 mm² 35 mm² on side 2 5 Nm AWG 2 35 mm² 2.5 mm² 2.5 mm² 16 mm²                       Clamping range, max. 35 mm² Clamping screw M6 Connection cross-section, stranded, min. 2.5 mm² Gauge to IEC 60947-1 B8 Stripping length 18 mm Type of connection Screw connection Wire connection cross section AWG, min. AWG 12 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 35 mm² Wire connection cross-section, finely stranded, min. 2.5 mm² Wire connection cross-section, solid core, min. 2.5 mm² Dimensions   TS 35 offset   32 mm         Centre screw on PE terminals PEN function M4 Yes     800 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 2 AWG Conductor size Field wiring max. (UR) 2 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   PE rating data   Rated short-time current 4200 A (35 mm²) Tightening torque range for fixing screw 1.2...2.4 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   35 mm² IEC 60947-7-2 8 kV 0.26 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 12 AWG Conductor size Field wiring min. (UR) 12 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information   Instructions for accessories   Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Creation date November 5, 2018 9:33:33 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WPE 35.pdf IECEXULD14.0005U_e.pdf DE_PT1002_20160414_256_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_ IECEx_WDU-WPE 35.pdf Safety note   Safety notice   Safety Information Creation date November 5, 2018 9:33:33 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 35   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 5, 2018 9:33:33 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5