Data sheet
W-Series
WSI 6/LD 250AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
Klippon® Connect with clamping yoke Technology
The high reliability and variety of designs of the terminal
blocks with clamping yoke connections make planning
easer and optimises operational safety. Klippon®
Connect provides a proven response to a range of
different requirements.
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
WSI 6/LD 250AC
1012400000
W-Series, Fuse terminal, Rated cross-section: 6
mm², Screw connection
4008190139834
50 pc(s).
Creation date November 19, 2018 9:51:39 PM CET
Catalogue status 09.11.2018 / We reserve the right to make technical changes.
1
Data sheet
W-Series
WSI 6/LD 250AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Depth including DIN rail
Net weight
7.9 mm
60 mm
71.5 mm
72 mm
19.47 g
Width (inches)
Height (inches)
Depth (inches)
Weight
0.311 inch
2.362 inch
2.815 inch
21.5 g
-50 °C
Continuous operating temp., max.
120 °C
Wemid
V-0
Colour
Dark Beige
Screw connection,
Fuse isolator, with LED,
for screwable crossconnection, One end
without connector
Yes
1
1
No
No
No
Tightening torque (clamping screw for
copper conductors)
Number of potentials
No. of clamping points per level
Levels cross-connected internally
Mounting rail
PE function
Temperatures
Continuous operating temp., min.
Material data
Material
UL 94 flammability rating
System specifications
Version
End cover plate required
Number of levels
Number of potentials per tier
PE connection
N-function
PEN function
0.8...1.6 Nm
1
2
No
TS 35
No
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Wire connection cross section, finely
stranded, two clampable wires, min.
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, min.
Wire cross-section, finely stranded, two
clampable wires, max.
2.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, max.
2.5 mm²
No
right
Number of similar terminals
Type of mounting
1
Snap-on
200039-1057876
20 AWG
Wire cross section max. (CSA)
8 AWG
0.5 mm²
0.5 mm²
Additional technical data
Explosion-tested version
Open sides
CSA rating data
Certificate No. (CSA)
Wire cross section min. (CSA)
Conductors for clamping (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
6 mm²
Creation date November 19, 2018 9:51:39 PM CET
Catalogue status 09.11.2018 / We reserve the right to make technical changes.
2
Data sheet
W-Series
WSI 6/LD 250AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Conductors for clamping (rated connection)
Blade size
Clamping range, min.
Connection cross-section, stranded,
max.
Connection direction
Number of connections
Tightening torque, max.
Torque level with DMS electric
screwdriver
Wire connection cross section AWG,
max.
Wire connection cross section, finely
stranded, max.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, min.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min.
Wire connection cross-section, solid
core, max.
0.8 x 4.0 mm
0.5 mm²
10 mm²
on side
2
1.6 Nm
3
AWG 8
10 mm²
0.5 mm²
0.5 mm²
10 mm²
Clamping range, max.
10 mm²
Clamping screw
M 3.5
Connection cross-section, stranded, min.
1.5 mm²
Gauge to IEC 60947-1
A5
Stripping length
12 mm
Tightening torque, min.
0.8 Nm
Type of connection
Screw connection
Wire connection cross section AWG,
min.
AWG 20
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, max.
6 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max.
6 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire connection cross-section, solid
core, min.
0.5 mm²
Display element
Operating voltage for display, max.
Type of voltage for indicator
250 V
AC/DC
Operating voltage for display, min.
140 V
G-Si. 5 x 20
Pivoting
Display
Operating voltage, max.
Power loss, 1-pole ; 2-pole ; 3-pole
red LED
250 V
AC/DC
6 mm²
500 V
6.3 A
Rated voltage
Rated current
Standards
Rated impulse withstand voltage
Conductor size Factory wiring max. (UR) 8 AWG
Conductor size Field wiring max. (UR) 8 AWG
Fuse terminals
Cartridge fuse
Fuse holder (cartridge holder)
Permitted power loss for fuse with
semiconductor protection
Type of voltage for indicator
Rating data
Rated cross-section
Rated voltage to adjoining terminal
Current at maximum wires
Volume resistance according to IEC
60947-7-x
Pollution severity
0.78 mΩ
3
250 V
6.3 A
IEC 60947-7-3
6 kV
UL rating data
Certificate No. (UR)
E60693
Conductor size Factory wiring min. (UR) 22 AWG
Conductor size Field wiring min. (UR)
22 AWG
Creation date November 19, 2018 9:51:39 PM CET
Catalogue status 09.11.2018 / We reserve the right to make technical changes.
3
Data sheet
W-Series
WSI 6/LD 250AC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Classifications
ETIM 3.0
ETIM 5.0
UNSPSC
eClass 6.2
eClass 8.1
eClass 9.1
EC000899
EC000899
30-21-18-11
27-14-11-16
27-14-11-16
27-14-11-16
ETIM 4.0
ETIM 6.0
eClass 5.1
eClass 7.1
eClass 9.0
EC000899
EC000899
27-14-11-16
27-14-11-16
27-14-11-16
Product information
Descriptive text ordering data
Instructions for accessories
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Markers only fit on one side. Cross-connections, see section "W series accessories".
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Engineering Data
User Documentation
CB Testreport
CB Certificate
DE_PT1003_20160418_961_ISSUE01.pdf
CAT 1 TERM 16/17 EN
EPLAN, WSCAD, Zuken E3.S
STEP
Beipackzettel_SAKS_GL_LD.pdf
NTI_Ex nA WSI 6.pdf
Safety note
Safety notice
Safety Information
Creation date November 19, 2018 9:51:39 PM CET
Catalogue status 09.11.2018 / We reserve the right to make technical changes.
4
Data sheet
W-Series
WSI 6/LD 250AC
Drawings
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Creation date November 19, 2018 9:51:39 PM CET
Catalogue status 09.11.2018 / We reserve the right to make technical changes.
5
