Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular PE conductor terminals | Wstandard
General ordering data
Order No.
Part designation
Version
EAN
Qty.
Product notes
Note, technical data
Product description
Note, accessories
PT OKIECEx/ATEX rating data
EU-type examination certificate
Download, German
Download English
IECEx Certificate of Conformity
Download
ATEX conductor cross-section
IECEx conductor cross-section
Voltage when using cross-connections
Operating temperature range
1016400000
WPE 2.5/1.5/ZR
Earth terminal, 2.5 mm², Screw connection,
Wemid, green/yellow, TS 35
4008190054021
100 pc(s).
2.5 mm² conductor with wire end ferrule plus
plastic collar only with collar optimised for
diameter (order No. 1333100000, 500 pcs)
Identical form for 2.5-10 mm² enables the use of
common end and partition plates. An unsurpassed
combination of many advantages!
Rail support for insulated installation of terminal
rail "SH 2" order no. 0494920000 (10 pcs)
Marking EN 60079-7
Marking ATEX Directive 94/9/EC
KEMA98ATEX1685U
KEMA98ATEX1685U_d.pdf
KEMA98ATEX1685U_e.pdf
IECEXULD05.0008U
IECEXULD05.0008U_e.pdf
2.5 mm²
2.5 mm²
CrossConnectionGuide.pdf
For operating temperature range see EC Design
Test Certificate / IEC Ex-Certificate of Conformity
Ex e II
Ex II 2 G D
Additional technical data
Colour of insulating material
Connection direction
green/yellow
on side
-1-
Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular PE conductor terminals | Wstandard
Additional technical data
End plate required
Explosion-tested version "Ex e"
Installation advice
Insulating material
Levels cross-connected internally
No. of identical terminals
No. of levels
No. of terminal strips per level
Open sides
Operating temperature range
Product family
Type of connection
Type of mounting
UL 94 flammability rating of insulation material
Version
Yes
Yes
TS 35
Wemid
No
1
1
3
right
- 50 °C, + 120 °C
W-Series
Screwed
Screwed
V-0
PE terminal
CSA rating data
Min. cross-section (CSA)
Max. cross-section (CSA)
AWG 26
AWG 12
Conductors for clamping (additional
connection)
Stripping length (B1)
Clamping screw
Blade size
Tightening torque range
Solid, min.
Solid, max.
Stranded, min.
Stranded, max.
Flexible, min.
Flexible, max.
Flexible with ferrule, min. (DIN 46228 pt 1)
Flexible with ferrule, max. (DIN 46228 pt 1)
7 mm
M 2.5
0.6 x 3.5 mm
0.4...0.6 Nm
0.5 mm²
2.5 mm²
1.5 mm²
2.5 mm²
0.5 mm²
1.5 mm²
0.5 mm²
2.5 mm²
Conductors for clamping (rated connection)
Clamping range, min.
Clamping range, max.
Type of connection
2nd type of connection
Connection direction
No. of connections
Stripping length
Clamping screw
Blade size
Tightening torque range
Torque level with DMS electric screwdriver
Gauge to IEC 60947-1
Solid, min.
Solid, max.
Stranded, min.
0.05 mm²
4 mm²
Screw connection
screwed
on side
1
10 mm
M 2.5
0.6 x 3.5 mm
0.4...0.6 Nm
1
A3
0.5 mm²
4 mm²
1.5 mm²
-2-
Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular PE conductor terminals | Wstandard
Conductors for clamping (rated connection)
Stranded, max.
Flexible, min.
Flexible, max.
Flexible with ferrule, min. (DIN 46228/1)
Flexible with ferrule, max. (DIN 46228/1)
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
AWG conductor size, min.
AWG conductor size, max.
AWG conductor size, min.
AWG conductor size, max.
4 mm²
0.5 mm²
4 mm²
0.5 mm²
2.5 mm²
0.5 mm²
2.5 mm²
AWG 26
AWG 12
0.13 mm²
3.31 mm²
Dimensions
Width
Height of lowest version
Length
TS 35 offset
5.1 mm
47 mm
60 mm
32 mm
Disconnect terminals
Torque level with DMS electric screwdriver
1
PE rating data
Centre screw on PE terminals
PEN function
Pollution severity
Rated cross-section
Rated impulse withstand voltage to adjacent
terminal
Rated short-time current
Rated voltage for adjacent terminal
Standards
Tightening torque range for fixing screw
Torque level with DMS electric screwdriver
UL rating data
Min. cross-section (UL)
Max. cross-section (UL)
M 2.5
No
3
2.5 mm²
8 kV
300 A (2.5 mm²)
800 V
IEC 60947-7-2
0.4...0.6 Nm
1
AWG 30
AWG 12
-3-
Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular PE conductor terminals | Wstandard
Approvals
Approvals institutes
Downloads
STEP
1016400000_18879_WPE_2.5-1.5-ZR_STP.stp
Classifications
eClass 4.1
eClass 5.0
eClass 5.1
27-14-03-05
27-14-03-05
27-14-03-05
Similar products
Order No.
1016500000
Part designation
WPE 1.5/ZZ
1036300000
1010000000
WDK 2.5PE
WPE 2.5
1010100000
WPE 4
1905130000
WPE 4/ZZ
1905120000
WPE 4/ZR
1010200000
WPE 6
1010300000
WPE 10
1042500000
WPE 10/ZR
1010400000
WPE 16
1010500000
WPE 35
1037300000
WPE 70/95
1019700000
WPE 120/150
Version
Earth terminal, 1.5 mm², Screw connection, Wemid, green/yellow,
TS 35
Earth terminal, 2.5 mm², Screw connection, Wemid, green, TS 35
Earth terminal, 2.5 mm², Screw connection, Wemid, green/yellow,
TS 35
Earth terminal, 4 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 4 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 4 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 6 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 10 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 10 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 16 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 35 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 95 mm², Screw connection, Wemid, green/yellow, TS
35
Earth terminal, 120 mm², Screw connection, Wemid, green/yellow,
TS 35
-4-
