1016500000

    Data sheet W-Series WPE 1.5/ZZ Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 1.5/ZZ 1016500000 PE terminal, Screw connection, 1.5 mm², 180 A (1.5 mm²), green / yellow 4008190170738 100 pc(s). Creation date November 5, 2018 10:25:15 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 1.5/ZZ   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 60 mm 46.5 mm 47 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.362 inch 1.831 inch 18.318 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   green / yellow DEMKO14ATEX1338U 1.5 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 1.5 mm²     Screw connection, Twin connection, With PE connection, One end without connector   Tightening torque (mounting screw)   End cover plate required           Number of levels Number of potentials per tier PE connection N-function PEN function Yes 1 1 Yes No No Yes for screw fixing right       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 200039-1057876 26 AWG     Wire cross section max. (CSA)   14 AWG Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   0.4...0.6 Nm 1 4 No TS 35 Yes 0.4...0.6 Nm Additional technical data   Explosion-tested version Interlock Open sides   CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 5, 2018 10:25:15 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 1.5/ZZ   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.13 mm² 2.5 mm² on side 4 0.6 Nm 1 AWG 12 1.5 mm² 0.5 mm² 0.5 mm² 2.5 mm²                         Clamping range, max. 2.5 mm² Clamping screw M 2.5 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A1 Stripping length 7 mm Tightening torque, min. 0.4 Nm Type of connection Screw connection Wire connection cross section AWG, min. AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 1.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 1.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross-section, solid core, min. 0.5 mm² Dimensions   TS 35 offset   32 mm         Centre screw on PE terminals PEN function M 2.5 No     800 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 14 AWG Conductor size Field wiring max. (UR) 14 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   PE rating data   Rated short-time current 180 A (1.5 mm²) Tightening torque range for fixing screw 0.4...0.6 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   1.5 mm² IEC 60947-7-2 8 kV 1.83 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 26 AWG Conductor size Field wiring min. (UR) 22 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Creation date November 5, 2018 10:25:15 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 1.5/ZZ   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Instructions for accessories   Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WPE 1.5_ZZ.pdf IECEXULD14.0005U_e.pdf DE_PT1002_20160414_246_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_IECEx_WDU-WPE 2.5 1.5 ZR.pdf Safety note   Safety notice   Safety Information Creation date November 5, 2018 10:25:15 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 1.5/ZZ   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 5, 2018 10:25:15 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5