1019100000

    Data sheet W-Series WPE 16N Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 16N 1019100000 PE terminal, Screw connection, 16 mm², 1920 A (16 mm²), green / yellow 4008190273248 50 pc(s). Creation date November 6, 2018 2:42:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 16N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   12 mm 56 mm 46.5 mm 47 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.472 inch 2.205 inch 1.831 inch 33.98 g -50 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   green / yellow Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Screw connection, With PE  connection, closed   1.2...2.4 Nm   1   2   No   TS 35   Yes Tightening torque (mounting screw) End cover plate required 0.5...1 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Additional technical data   Explosion-tested version Interlock Open sides   No for screw fixing closed       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 200039-1057876 14 AWG     Wire cross section max. (CSA)   6 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 6, 2018 2:42:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 16N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.   1.0 x 5.5 mm 1.5 mm² 25 mm² on side 2 2.4 Nm Screw connection AWG 14 16 mm² 16 mm² 1.5 mm² 1.5 mm²         Clamping range, max. 25 mm² Clamping screw M4 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 B7 Stripping length 12 mm Tightening torque, min. 1.2 Nm Wire connection cross section AWG, max. AWG 6 Wire connection cross section, finely stranded, max. 16 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 1.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 4 mm² Wire connection cross-section, solid core, max. 16 mm²           Centre screw on PE terminals PEN function M3 Yes     400 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 6 AWG Conductor size Field wiring max. (UR) 6 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0                   Dimensions   TS 35 offset   32 mm PE rating data   Rated short-time current 1920 A (16 mm²) Tightening torque range for fixing screw 0.5...1.0 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   16 mm² IEC 60947-7-2 6 kV 0.42 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 14 AWG Conductor size Field wiring min. (UR) 14 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Creation date November 6, 2018 2:42:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 16N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Descriptive text technical data Instructions for accessories   25 mm² stranded requires a tightening torque of 2.2 Nm. Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   DE_PT1002_20160414_251_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 6, 2018 2:42:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 16N   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 6, 2018 2:42:16 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5