Data sheet
W-Series
WDU 10 BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Klippon® Connect with clamping yoke Technology
The high reliability and variety of designs of the terminal
blocks with clamping yoke connections make planning
easer and optimises operational safety. Klippon®
Connect provides a proven response to a range of
different requirements.
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
WDU 10 BL
1020380000
Feed-through terminal, Screw connection, 10
mm², 1000 V, 57 A, Blue
4008190166359
50 pc(s).
Creation date November 6, 2018 2:55:44 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
1
Data sheet
W-Series
WDU 10 BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Depth including DIN rail
Net weight
9.9 mm
60 mm
46.5 mm
47 mm
17.06 g
Width (inches)
Height (inches)
Depth (inches)
Weight
0.39 inch
2.362 inch
1.831 inch
19.16 g
-60 °C
Continuous operating temp., max.
130 °C
Wemid
V-0
Colour
Blue
DEMKO14ATEX1338U
690 V
10 mm²
57 A
For operating temperature
range see EC Design
Test Certificate / IEC ExCertificate of Conformity
II 2 G D
Certificate No. (IECEX)
Current (ATEX)
Max. voltage (IECEX)
Wire cross section max. (IECEX)
Marking EN 60079-7
IECEXULD14.0005U
57 A
440 V
10 mm²
Screw connection,
for screwable crossconnection, One end
without connector
Tightening torque (clamping screw for
aluminium conductors)
End cover plate required
Number of levels
Number of potentials per tier
PE connection
N-function
PEN function
Temperatures
Continuous operating temp., min.
Material data
Material
UL 94 flammability rating
Rating data IECEx/ATEX
Certificate No. (ATEX)
Max. voltage (ATEX)
Wire cross section max. (ATEX)
Current (IECEX)
Operating temperature range
Ex 2014/34/EU label
Ex eb II C Gb
System specifications
Version
Tightening torque (clamping screw for
copper conductors)
Number of potentials
No. of clamping points per level
Levels cross-connected internally
Mounting rail
PE function
1.2...1.9 Nm
1
2
No
TS 35
No
1.2 Nm
Yes
1
1
No
Yes
No
2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)
Cross-section for connected wire, solid,
two clampable wires, min.
Cross-section for connected wire,
stranded, two clampable wires, min.
Wire connection cross section, finely
stranded, two clampable wires, min.
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, min.
0.5 mm²
0.5 mm²
0.5 mm²
0.5 mm²
Cross-section for connected wire, solid,
two clampable wires, max.
Cross-section for connected wire,
stranded, two clampable wires, max.
Wire cross-section, finely stranded, two
clampable wires, max.
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, 2 clampable wires, max.
6 mm²
6 mm²
6 mm²
6 mm²
Creation date November 6, 2018 2:55:44 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
2
Data sheet
W-Series
WDU 10 BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Additional technical data
Explosion-tested version
Open sides
Yes
right
Number of similar terminals
Type of mounting
1
Snap-on
200039-1057876
600 V
18 AWG
Current size C (CSA)
Wire cross section max. (CSA)
65 A
6 AWG
Clamping range, max.
Clamping screw
Connection direction
16 mm²
M4
Number of connections
Tightening torque, max.
Torque level with DMS electric
screwdriver
Twin wire-end ferrules, min.
Wire connection cross section AWG,
max.
Wire connection cross section, finely
stranded, max.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, min.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min.
Wire connection cross-section, solid
core, max.
CSA rating data
Certificate No. (CSA)
Voltage size C (CSA)
Wire cross section min. (CSA)
Conductors for clamping (rated connection)
Blade size
Clamping range, min.
Connection cross-section, stranded,
max.
Gauge to IEC 60947-1
Stripping length
Tightening torque, min.
Twin wire-end ferrules, max.
Type of connection
Wire connection cross section AWG,
min.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, max.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max.
Wire connection cross-section, finely
stranded, min.
Wire connection cross-section, solid
core, min.
1.0 x 5.5 mm
1.31 mm²
16 mm²
B6
12 mm
1.2 Nm
6 mm²
Screw connection
AWG 16
16 mm²
16 mm²
1.5 mm²
1.5 mm²
on side
2
1.9 Nm
4
1.5 mm²
AWG 6
16 mm²
1.5 mm²
1.5 mm²
16 mm²
Rating data
Rated cross-section
Rated current
Standards
Rated impulse withstand voltage
10 mm²
57 A
IEC 60947-7-1
8 kV
Rated voltage
Current at maximum wires
Volume resistance according to IEC
60947-7-x
Pollution severity
1,000 V
76 A
Conductor size Factory wiring max. (UR) 6 AWG
Conductor size Field wiring max. (UR) 6 AWG
Current size C (UR)
65 A
0.56 mΩ
3
UL rating data
Certificate No. (UR)
Conductor size Factory wiring min. (UR)
Conductor size Field wiring min. (UR)
Voltage size C (UR)
E60693
18 AWG
18 AWG
600 V
Creation date November 6, 2018 2:55:44 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
3
Data sheet
W-Series
WDU 10 BL
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Classifications
ETIM 3.0
ETIM 5.0
UNSPSC
eClass 6.2
eClass 8.1
eClass 9.1
EC000897
EC000897
30-21-18-11
27-14-11-20
27-14-11-20
27-14-11-20
ETIM 4.0
ETIM 6.0
eClass 5.1
eClass 7.1
eClass 9.0
EC000897
EC000897
27-14-11-20
27-14-11-20
27-14-11-20
Product information
Descriptive text ordering data
Descriptive text technical data
Instructions for accessories
1000 VDC rated voltage tested. For alternative colours, see section on W-series accessories – specific functions.
Note max. current of terminal (76 A) when using WQV! Tighten AWG 6/7 and H07V-R16 to 2.4 Nm.
Cross-connections, socket and test plug, see section "W series accessories". Only 400 V with the use of shield
bus LS 2.8 1056400000.
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Engineering Data
User Documentation
CFAT_WDU 10.pdf
IECEXULD14.0005U_e.pdf
CB Testreport
CB Certificate
DE_PT1001_20160414_117_ISSUE01.pdf
ACF-ATEX_4786180920
CAT 1 TERM 16/17 EN
EPLAN, WSCAD, Zuken E3.S
STEP
NTI_ IECEx_WDU-WPE 10.pdf
Safety note
Safety notice
Safety Information
Creation date November 6, 2018 2:55:44 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
4
Data sheet
W-Series
WDU 10 BL
Drawings
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Creation date November 6, 2018 2:55:44 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
5