1022100000

    Data sheet... W-terminal with solder connection WDU 2.5 SL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality tinned copper for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1022100000 WDU 2.5 SL W-terminal with solder connection, Feed-through terminal, Rated cross-section: 2.5 mm², Screw connection, Direct mounting 4008190100513 100 pc(s). Creation date May 23, 2013 11:30:25 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 1     Data sheet... W-terminal with solder connection WDU 2.5 SL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height of lowest version Net weight   64 mm 47 mm 7.48 g       Width Weight   -50 °C     Storage temperature Continuous operating temp., max. IECEXULD05.0008U_e.pdf  For operating temperature   range see EC Design Test Certificate / IEC ExCertificate of Conformity Voltage, cross-connection Marking ATEX Directive 94/9/EC 5.1 mm 7.68 g Temperatures   Operating temperature Continuous operating temp., min.   120 °C Rated data IECEx/ATEX   IEC Ex certificate Operating temperature range   CrossConnectionGuide.pdf II 2 G D Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1       Installation advice Open sides Version Direct mounting right Screw connection, Solder connection, One end without connector             Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 10 mm on side 0.13 mm² M 2.5 0.8 Nm Rated voltage Rated current Pollution severity 400 V 15 A 3 Snap-on Clampable wires (rated connection)   Type of connection Screw connection Blade size 0.6 x 3.5 mm Number of connections 1 Clamping range, rated connection, max. 4 mm² Tightening torque, min. 0.4 Nm Torque level with DMS electric screwdriver 1 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 26               A3 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12 Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires   2.5 mm² 6 kV 15 A       Creation date May 23, 2013 11:30:25 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 2     Data sheet... W-terminal with solder connection WDU 2.5 SL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Material data   Material UL 94 flammability rating   Wemid V-0     Colour   W-terminal with solder connection on side 1 No   Type of connection       Number of levels No. of clamping points per level End cover plate required EC000897 30-21-18-11 27-14-11-31 27-14-11-90         ETIM 3.0 eClass 4.1 eClass 6.2   Dark Beige System specifications   Product family Connection direction Number of connections Levels cross-connected internally   Screw connection 1 2 Yes Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.1   EC000897 27-14-11-31 27-14-11-90 Approvals   Approvals ROHS   Conform Creation date May 23, 2013 11:30:25 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 3