1024700000

    Data sheet W-Series WDU 2.5/1.5/ZR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDU 2.5/1.5/ZR 1024700000 Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, Dark Beige 4008190008833 100 pc(s). Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WDU 2.5/1.5/ZR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Weight   5.1 mm 60 mm 46.5 mm 8.6 g         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.362 inch 1.831 inch 7.54 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   Dark Beige DEMKO14ATEX1338U 690 V 2.5 mm² 24 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 24 A 690 V 2.5 mm²     Screw connection, Additional connection, for screwable crossconnection, One end without connector Yes 1 1 No No No   Tightening torque (clamping screw for copper conductors)             Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function   0.4...0.6 Nm 1 3 No TS 35 No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)   Cross-section for connected wire, solid, two clampable wires, min. 0.5 mm² Wire connection cross section, finely stranded, two clampable wires, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 0.5 mm²         Cross-section for connected wire, solid, two clampable wires, max. 2.5 mm² Wire cross-section, finely stranded, two clampable wires, max. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm² Additional technical data   Explosion-tested version Open sides   Yes right     Number of similar terminals Type of mounting 1 Snap-on Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WDU 2.5/1.5/ZR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   12400-240 300 V 26 AWG       Current size C (CSA) Wire cross section max. (CSA)     Clamping range, further connection, max. 2.5 mm² Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 1.5 mm² Conductor cross-section, flexible, further connection, min. 0.5 mm² Connection type, additional connection Screw connection Cross-section for connected wire, AWG, additional connection, min. AWG 26 Cross-section for connected wire, multicore, further connection, max. 2.5 mm² Cross-section for connected wire, solidcore, further connection, max. 2.5 mm² Number of connections, additional connection 2 Rated current, additional connection 17.5 A Terminal screw, additional connection M 2.5 Tightening torque, additional connection, min. 0.4 Nm 20 A 14 AWG Conductors for clamping (additional connection)   Blade size, additional connection Clamping range, further connection, min. Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. Connection direction Cross-section for connected wire, AWG, additional connection, max. Cross-section for connected wire, flexible, further connection, max. Cross-section for connected wire, multicore, further connection, min. Cross-section for connected wire, solidcore, further connection, min. Rated cross-section, further connection Stripping length , additional connection Tightening torque, additional connection, max.   SD 0.6 x 3.5 0.13 mm² 0.5 mm² on side AWG 12 1.5 mm² 0.5 mm² 0.5 mm² 1.5 mm² 7 mm 0.6 Nm                     Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² 4 mm² on side 1 0.6 Nm 1 0.5 mm² AWG 12 4 mm² 0.5 mm² 0.5 mm² 4 mm²                           Clamping range, max. 4 mm² Clamping screw M 2.5 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A3, A1 Stripping length 10 mm Tightening torque, min. 0.4 Nm Twin wire-end ferrules, max. 1.5 mm² Type of connection Screw connection Wire connection cross section AWG, min. AWG 30 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 2.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross-section, solid core, min. 0.5 mm² Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WDU 2.5/1.5/ZR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   2.5 mm² 24 A       800 V 32 A     Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   E60693 30 AWG 30 AWG 20 A 300 V           Conductor size Factory wiring max. (UR) Conductor size Field wiring max. (UR) Current size B (UR) Voltage size B (UR)   12 AWG 12 AWG 20 A 300 V EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 IEC 60947-7-1 8 kV III 1.33 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Current size C (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   The rated voltage is 400 V when using the ZQV cross-connector, additional connection (right 1.5 mm²) 2.5 mm² conductor with ferrule with plastic collar, with the collar optimised for diameter only (order No. 1333100000, QTY 500). Note: Use a 2.5 / 1 mm² conductor with the WQB. Cross-connections, see section "W series accessories". Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WDU 2.5_1.5_ZR.pdf IECEXULD14.0005U_e.pdf DE_PT1001_20160414_167_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_IECEx_WDU-WPE 2.5 1.5 ZR.pdf Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WDU 2.5/1.5/ZR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Safety note   Safety notice   Safety Information Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5     Data sheet W-Series WDU 2.5/1.5/ZR   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 6, 2018 9:23:11 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 6