1029900000

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular installation terminals | Distribution terminals General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description 1029900000 WDL 2.5/N/L/PE Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 4008190178956 50 pc(s). PE connection marked green/yellow Further connection refers to clamping point at top left (A4) 2-conductor, 1.5 mm², solid, with 0.6 Nm N-busbars may not be used in certain applications (medical systems). Instead, installation terminals with a disconnector in the centre of the terminal can be used. 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals dark beige on side No No TS 35 Wemid No 1 -1- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular installation terminals | Distribution terminals Additional technical data No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version 2 2 right - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Distribution terminal with N cross-connector CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 10 A AWG 26 AWG 12 Conductors for clamping (additional connection) Clamping range, min. Clamping range, max. Rated cross-section Rated current Connection direction No. of connections Stripping length (B1) Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 0.13 mm² 6 mm² 4 mm² 24 A on side 1 8 mm M3 0.6 x 3.5 mm 0.5...0.6 Nm 1 A4 0.5 mm² 6 mm² 1.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² AWG 26 AWG 10 0.13 mm² 5.26 mm² 0.13 mm² 4 mm² Screw connection -2- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular installation terminals | Distribution terminals Conductors for clamping (rated connection) 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. screwed on side 3 8 mm M 2.5 0.6 x 3.5 mm 0.4...0.6 Nm 1 A3 / A4 0.5 mm² 4 mm² 1.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² 0.5 mm² 4 mm² AWG 26 AWG 12 0.13 mm² 3.31 mm² Dimensions Width Height of lowest version Length TS 35 offset 6.1 mm 49 mm 90 mm 54 mm Disconnect terminals Torque level with DMS electric screwdriver 1 Other connections No. of connections 1 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 2.5 mm² 400 V 4 kV 24 A IEC 60947-7-1 (-7-2) 32 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) 300 V 15 A AWG 22 -3- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular installation terminals | Distribution terminals UL rating data Max. cross-section (UL) AWG 12 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-25 27-14-11-25 27-14-11-25 Similar products Order No. 1030400000 Part designation WDL 2.5/L 1030300000 WDL 2.5/L/L 1030200000 WDL 2.5/L/L/PE 1030000000 WDL 2.5/N/L 1031300000 WDL 2.5/S/L 1031200000 WDL 2.5/S/L/L 1031100000 WDL 2.5/S/L/L/PE 1030900000 WDL 2.5/S/N 1030800000 WDL 2.5/S/N/L 1030700000 WDL 2.5/S/N/L/PE Version Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Storey installation terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 -4-