1033300000

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 4 mm² | WMA 4/... General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English ATEX voltage ATEX current ATEX conductor cross-section Voltage when using cross-connections Operating temperature range Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals 1033800000 WMA 4/5 Feed-through terminal, 4 mm², Screw connection, Wemid, dark beige, TS 35 4008190129095 20 pc(s). When using twin ferrules, the rated voltage is 690 V. Their small size compared to the respective rated cross-section makes the modular terminals with the compact design very popular. KEMA98ATEX1683U KEMA98ATEX1683U_d.pdf KEMA98ATEX1683U_e.pdf 690 V 28 A 4 mm² CrossConnectionGuide.pdf For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity dark beige on side No Yes TS 35 Wemid No 4 -1- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 4 mm² | WMA 4/... Additional technical data No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version 1 2 right - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 35 A AWG 26 AWG 10 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 6 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. 0.13 mm² 6 mm² Screw connection screwed on side 2 10 mm M3 0.6 x 3.5 mm 0.5...1.0 Nm 1 A4 0.5 mm² 6 mm² 1.5 mm² 6 mm² 0.5 mm² 6 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 1.5 mm² AWG 26 AWG 10 0.13 mm² -2- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 4 mm² | WMA 4/... Conductors for clamping (rated connection) AWG conductor size, max. 5.26 mm² Dimensions Width Height of lowest version Length Weight TS 35 offset 30.6 mm 47 mm 60 mm 56.86 g 30 mm Disconnect terminals Torque level with DMS electric screwdriver 1 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Current with max. conductor Pollution severity 4 mm² 800 V 8 kV 32 A 41 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 35 A AWG 22 AWG 10 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 1034000000 Part designation WMA 4/4 Version Feed-through terminal, 4 mm², Screw connection, Wemid, dark beige, TS 35 -3-