1036000000

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with electronic components | WPO 4 General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description 1036000000 WPO 4 Component terminal, 4 mm², Screw connection, Wemid, beige, TS 35 4008190278175 50 pc(s). The tightening torque is 2 Nm when connecting two conductors. Modular terminals with electronic components are available for a number of standard applications. Other versions to customer specification are available upon request. 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Solid, min. Solid, max. Flexible, min. Flexible, max. 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides beige on side Yes No TS 35 Wemid No 1 1 2 right -1- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with electronic components | WPO 4 Additional technical data Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Feed-through terminal with electronic components CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 10 A AWG 26 AWG 12 Conductors for clamping (additional connection) Type of connection Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Screw connection 0.5 mm² 4 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. Dimensions Width Height of lowest version Length 0.13 mm² 4 mm² Screw connection screwed on side 2 8 mm M3 0.6 x 3.5 mm 0.5...1.0 Nm 2 A3 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² AWG 26 AWG 12 0.13 mm² 3.31 mm² 6 mm 47 mm 60 mm -2- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular terminals with electronic components | WPO 4 Dimensions TS 35 offset 32 mm Disconnect terminals Torque level with DMS electric screwdriver 2 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 4 mm² 250 V 4 kV 32 A IEC 60947-7-1 32 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 10 A AWG 26 AWG 12 Approvals Approvals institutes Downloads STEP 1036000000_21857_WPO_4_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-27 27-14-11-27 27-14-11-27 Similar products Order No. Part designation Version -3-